Init

etc/default/klipper

@@ -0,0 +1,3 @@
+KLIPPY_USER=pi
+KLIPPY_EXEC=/home/pi/klippy-env/bin/python
+KLIPPY_ARGS="/home/pi/klipper/klippy/klippy.py /home/pi/printer.cfg -I /tmp/klippy -a /tmp/klippy.sock -l /tmp/klippy.log"

etc/sudoers.d/010_pi-nopasswd

@@ -0,0 +1 @@
+pi ALL=(ALL) NOPASSWD: ALL

home/pi/3dscreen.settings.json

@@ -0,0 +1 @@
+{"system.branch.tekuschaya":"true"}

home/pi/printer.cfg

@@ -0,0 +1,11 @@
+[include printer_hw/hw.cfg]
+[include printer_soft/soft.cfg]
+[include 3dscreen/klipper/configs/*.cfg]
+[include printer/*.cfg]
+
+[bltouch]
+sensor_pin: PIN
+control_pin: PIN
+x_offset: 0
+y_offset: 0
+z_offset: 0

home/pi/printer_hw/bed.cfg

@@ -0,0 +1,18 @@
+[bed_mesh]
+speed: 120
+horizontal_move_z: 0
+mesh_min: 0, 0
+mesh_max: 0, 0
+zero_reference_position: 0, 0
+probe_count: 0, 0
+# fade_start: 0
+# fade_end: 0
+# fade_target: 0
+mesh_pps: 0, 0
+algorithm: bicubic
+bicubic_tension: 0
+
+[output_pin ps_on]
+pin: PIN
+value: 1
+shutdown_value: 1

home/pi/printer_hw/filament_sensor.cfg

@@ -0,0 +1,3 @@
+[filament_switch_sensor filament_sensor]
+pause_on_runout: True
+switch_pin: PIN