3diy
/
moonraker
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

docs: update simplyprint documentation 

Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
This commit is contained in:
Eric Callahan 2022-10-12 11:14:12 -04:00
parent 91e48200d6
commit edaeb17f38
No known key found for this signature in database
GPG Key ID: 5A1EB336DFB4C71B
1 changed files with 14 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

21
docs/configuration.md
View File

@ -1995,18 +1995,25 @@ webcam_name:
# to autodetect a webcam.
power_device:
# The name of a configured [power] device available to toggle over using
# the SimplyPrint service. For example, to toggle a device configured
# as `[power printer]` this may be configured as:
# the SimplyPrint service. For example, to toggle a device specified
# as [power printer] may be configured as:
# power_device: printer
# By default no power device is configured.
filament_sensor:
# The full name of a configured filament sensor to be monitored by
# SimplyPrint. The filament sensor must be configured in Klipper and
# the full name, including the prefix, must be specified. For example,
# to monitor a sensor configured as `[filament_switch_sensor fsensor],
# this may be configured as:
# The name of a configured filament sensor to be monitored by SimplyPrint.
# The filament sensor must be configured in Klipper and the full name,
# including the prefix, must be specified. For example, to monitor a sensor
# specified as [filament_switch_sensor fsensor] may be configured as:
# filament_sensor: filament_switch_sensor fsensor
# By default no filament sensor is monitored.
ambient_sensor:
# The name of a configured temperature sensor used to report the ambient
# temperature. The sensor must be configured in Klipper and the full name,
# including the prefix, must be specified. For example, an ambient sensor
# specified in Klipper as [temperature_sensor chamber] may be configured as:
# ambient_sensor: temperature_sensor chamber
# If no ambient_sensor is configured then SimplyPrint will use the extruder
# to estimate ambient temperature when the heater is idle and cool.
```
!!! Note