3diy
/
moonraker
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

docs: document the "timer" option for the power component 

Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
This commit is contained in:
Eric Callahan 2021-10-13 19:22:56 -04:00
parent 838b25d288
commit 8b510d9b03
1 changed files with 14 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

23
docs/configuration.md
View File

@ -229,22 +229,26 @@ initial_state: off
# The initial state for GPIO type devices. May be on or
# off. When moonraker starts the device will be set to this
# state. Default is off.
timer:
# A time (in seconds) after which the device will power off after being.
# switched on. This effectively turns the device into a momentary switch.
# This option is available for gpio, tplink_smartplug, shelly, and tasmota
# devices. The timer may be a floating point value for gpio types, it should
# be an integer for all other types. The default is no timer is set.
#
address:
port:
timer:
# The above options are used for "tplink_smartplug" devices. The
# address should be a valid ip or hostname for the tplink device.
# The port should be the port the device is configured to use.
# The timer option is used to delay the turn off for x sec when
# its already on.
# "Power Strips" can be controlled by including the socket index
# in the ip address. For example, to control socket index 1:
# 192.168.1.127/1
# The address must be provided. The port defaults to 9999.
#
address:
password:
output_id:
timer:
# The above options are used for "tasmota" devices. The
# address should be a valid ip or hostname for the tasmota device.
# Provide a password if configured in Tasmota (default is empty).
@ -253,20 +257,18 @@ timer:
# If your single-relay Tasmota device switches on/off successfully,
# but fails to report its state, ensure that 'SetOption26' is set in
# Tasmota.
#
address:
user:
password:
output_id:
timer:
# The above options are used for "shelly" devices. The
# address should be a valid ip or hostname for the Shelly device.
# Provide a user and password if configured in Shelly (default is empty).
# If password is set but user is empty the default user "admin" will be used
# Provided an output_id (relay id) if the Shelly device supports
# more than one (default is 0). When timer option is used to delay the turn
# off make sure to set the state to "on" in action call_remote_method.
# So we send a command to turn it on for x sec when its already on then
# it turns off.
# more than one (default is 0).
#
address:
device:
user:
@ -280,6 +282,7 @@ password:
# "ID" in the "advanced information" section.
# Provide a user and password with access to "device control"
# and at least the specific device you want to control
#
address:
port:
device:
@ -289,6 +292,7 @@ domain:
# address should be a valid ip or hostname for the homeassistant controller.
# "device" should be the ID of the switch to control.
# "domain" is the class of device set managed by homeassistant, defaults to "switch".
#
address:
user:
password:
@ -300,6 +304,7 @@ output_id:
# The output_id is the name of a programmed output, virtual input or virtual
# output in the loxone config his output_id (name) may only be used once in
# the loxone config
#
on_code:
off_code:
# The above options are used for "rf" devices. The