3diy
/
moonraker
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

docs: clarify power on start usage 

Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
This commit is contained in:
Eric Callahan 2022-12-27 10:37:10 -05:00
parent 1999b82a86
commit 358aee956b
No known key found for this signature in database
GPG Key ID: 5A1EB336DFB4C71B
1 changed files with 10 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
docs/configuration.md
View File

@ -1174,8 +1174,10 @@ gcode:
Some users have their logic wired to a separate power supply from heaters,
fans, etc. This keeps Klipper in the "ready" state when power is removed
from such devices. It is possible to configure Klipper to power up such
devices when a print is started by overriding the `SDCARD_PRINT_FILE` gcode
command. The following example presumes that the user a `[power heaters]`
devices just before a print is started by overriding the `SDCARD_PRINT_FILE`
gcode command.
The following example presumes that the user a `[power heaters]`
device configured in `moonraker.conf`:
```ini
@ -1203,6 +1205,12 @@ gcode:
```
!!! Warning
The `SDCARD_PRINT_FILE` G-Code command will be executed when a Moonraker
forwards a request to start a print. Do not put this command in a G-Code
file or in a macro that is run from a G-Code file. This will result in an
`SD Busy` error and abort the print.
##### Force a power device to change state during a print