3diy
/
moonraker
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

docs: document the "off_when_shutdown" option for the power plugin 

Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
This commit is contained in:
Arksine 2021-01-02 19:53:41 -05:00
parent 222f0c4695
commit 2bb9128b5b
1 changed files with 5 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
docs/configuration.md
View File

@ -147,6 +147,10 @@ and Tasmota (via http) devices are supported.
type: gpio type: gpio
# The type of device. Can be either gpio, tplink_smartplug or tasmota. # The type of device. Can be either gpio, tplink_smartplug or tasmota.
# This parameter must be provided. # This parameter must be provided.
off_when_shutdown: False
# If set to True the device will be powered off when Klipper enters
# the "shutdown" state. This option applies to all device types.
# The default is False.
pin: gpiochip0/gpio26 pin: gpiochip0/gpio26
# The pin to use for GPIO devices. The chip is optional, if left out # The pin to use for GPIO devices. The chip is optional, if left out
# then the module will default to gpiochip0. If one wishes to invert # then the module will default to gpiochip0. If one wishes to invert
@ -186,6 +190,7 @@ Below are some potential examples:
[power printer] [power printer]
type: gpio type: gpio
pin: gpio26 pin: gpio26
off_when_shutdown: True
initial_state: off initial_state: off
[power printer_led] [power printer_led]