..
chelper
serialqueue: Increase receive message debug queue to 100 messages
2018-09-02 12:16:13 -04:00
extras
display: Corrected Fan icon graphics ( #753 )
2018-10-07 13:38:11 -04:00
kinematics
cartesian: Use homing_speed for homing retract speed
2018-10-09 11:17:39 -04:00
clocksync.py
clocksync: Simplify is_active() check
2018-05-31 18:20:30 -04:00
configfile.py
configfile: add get_prefix_options method
2018-09-30 11:51:26 -04:00
console.py
console: Use reactor register_callback() mechanism
2018-09-02 12:31:36 -04:00
gcode.py
gcode: modify get_status method to output more info ( #651 )
2018-09-17 08:25:28 -04:00
heater.py
heater: Add new TURN_OFF_HEATERS command
2018-09-18 16:01:07 -04:00
homing.py
probe: Verify the toolhead moves at least some distance on a probe
2018-10-01 11:12:30 -04:00
klippy.py
configfile: Move config file code from klippy.py to new file
2018-09-25 13:48:46 -04:00
mathutil.py
mathutil: Log starting error in coordinate_descent()
2018-07-24 08:32:35 -04:00
mcu.py
mcu: Log MCU information before configuring
2018-09-03 18:34:10 -04:00
msgproto.py
msgproto: Add support for a get_constant_int() method
2018-05-28 10:43:40 -04:00
parsedump.py
build: Request python2 for all directly executed python binaries
2017-06-27 20:26:02 -04:00
pins.py
pins: Verify the pin_map setting
2018-09-03 18:16:44 -04:00
queuelogger.py
klippy: Automatically clear rollover_info on each restart
2018-04-03 13:18:52 -04:00
reactor.py
reactor: Add ability to register callbacks
2018-06-30 14:13:47 -04:00
serialhdl.py
serialqueue: Limit message transmission to available receive buffer size
2018-05-28 11:12:30 -04:00
stepper.py
stepper: Adding support for a second_homing_speed parameter ( #677 )
2018-10-04 18:55:58 -04:00
toolhead.py
toolhead: M204 must update max_accel_to_decel
2018-10-01 22:02:33 -04:00
util.py
util: Change the /tmp/printer pty to be group readable
2018-05-16 13:25:21 -04:00
f7a7223b30