..
img
docs: Add Delta_Calibrate.md guide with "enhanced delta calibration"
2018-09-25 13:48:46 -04:00
prints
delta_calibrate: Initial support for enhanced delta calibration
2018-09-25 13:48:46 -04:00
BLTouch.md
docs: Improve the BLTouch documentation ( #1107 )
2019-01-25 12:53:00 -05:00
Bootloaders.md
samd21: Add support for flashing an application via the bossac tool
2018-11-30 22:22:42 -05:00
CONTRIBUTING.md
docs: Add a CONTRIBUTING document
2017-12-24 12:33:01 -05:00
Code_Overview.md
docs: Update Code_Overview.md with removal of printer_state() callback
2019-01-08 11:34:09 -05:00
Config_Changes.md
i2ccmds: Pass the i2c address as a 7-bit number (0-127)
2019-01-07 20:00:44 -05:00
Config_checks.md
docs: Add a Slicers.md document
2018-10-28 10:47:32 -04:00
Contact.md
docs: Expand on why it is important to provide the log in Contact.md
2018-07-08 20:30:35 -04:00
Debugging.md
docs: Sort command dispatch table by transfer rate
2019-01-20 14:17:08 -05:00
Delta_Calibrate.md
delta_calibrate: Do not automatically run G28 on DELTA_CALIBRATE
2018-10-22 11:26:01 -04:00
Endstop_Phase.md
docs: Minor rewording in Endstop_Phase.md
2018-11-14 09:46:21 -05:00
FAQ.md
docs: Minor wording change to step_distance FAQ
2019-01-27 16:52:16 -05:00
Features.md
docs: Add sam4s8c benchmarks
2019-01-07 19:43:56 -05:00
G-Codes.md
pause_resume: update documentation
2019-01-28 11:23:52 -05:00
Installation.md
Kconfig: Move SERIAL_BAUD to src/Kconfig and show with LOW_LEVEL_OPTIONS
2019-01-25 18:02:03 -05:00
Kinematics.md
docs: Minor change to wording of junction speeds
2018-08-03 15:48:07 -04:00
MCU_Commands.md
basecmd: Rename get_status to get_clock
2018-05-29 10:57:29 -04:00
Overview.md
docs: Add a new Config_Changes.md document
2019-01-07 20:00:44 -05:00
Packaging.md
util: Fix versioning when gitdir is absent ( #809 )
2018-10-27 10:44:38 -04:00
Pressure_Advance.md
docs: Update pressure advance doc to note it only impacts the extruder
2018-10-25 19:09:47 -04:00
Protocol.md
docs: Replace get_status example with get_clock in Protocol.md
2018-10-20 11:53:32 -04:00
README.md
docs: Improve documentation for those starting in docs/
2017-04-27 16:05:26 -04:00
Releases.md
docs: Update release notes for v0.7.0 release
2018-12-20 09:15:24 -05:00
Sensorless_Homing.md
docs: Add guide for sensorless homing ( #1004 )
2019-01-07 10:39:16 -05:00
Slicers.md
docs: Add a Slicers.md document
2018-10-28 10:47:32 -04:00
beaglebone.md
pru: Disable ADC reading directly from the PRU
2018-06-27 12:10:25 -04:00
developer-certificate-of-origin
docs: Add a CONTRIBUTING document
2017-12-24 12:33:01 -05:00
issue_template.md
docs: Add github issue template
2018-01-31 14:30:05 -05:00
stm32f1.md
docs: Update stm32f1.md - usb is now supported.
2018-10-22 13:22:58 -04:00
893cbbab83