..
avrsim.cfg
…
example-corexy.cfg
…
example-delta.cfg
config: The delta_calibrate bed radius uses nozzle coordinates
2018-10-01 11:12:30 -04:00
example-extras.cfg
Implement idle event support in the TMC2660 extra
2018-10-28 18:45:49 -04:00
example-menu.cfg
menu: new fast step rate feature
2018-09-21 19:29:30 -04:00
example-multi-mcu.cfg
docs: Update documentation to note use of /dev/serial/by-path/
2018-06-01 17:22:03 -04:00
example.cfg
extruder: Don't use max_extrude_cross_section in max_extrude_only defaults
2018-10-25 19:09:47 -04:00
generic-cramps.cfg
pru: Disable ADC reading directly from the PRU
2018-06-27 12:10:25 -04:00
generic-duet2.cfg
config: Add generic duet2 config and tests ( #834 )
2018-10-31 09:58:43 -04:00
generic-einsy-rambo.cfg
tmc2130: Initial support for sensorless homing
2018-05-25 11:38:23 -04:00
generic-melzi.cfg
…
generic-mini-rambo.cfg
config: Use fastest PWM time in mini-rambo PWM DAC config
2018-09-11 09:40:48 -04:00
generic-printrboard.cfg
avr: Use generic usb_cdc code for usb serial support
2018-09-30 22:55:21 -04:00
generic-radds.cfg
…
generic-rambo.cfg
…
generic-ramps.cfg
config: Add encoder buttons to generic-ramps.cfg
2018-08-26 23:08:27 -04:00
generic-re-arm.cfg
config: Fix generic-re-arm.cfg encoder pins
2018-09-12 14:43:10 -04:00
generic-replicape.cfg
…
generic-rumba.cfg
config: Add lcd encoder pins to generic-rumba.cfg
2018-10-28 14:34:22 -04:00
generic-smoothieboard.cfg
config: Add example lcd section to smoothieboard config
2018-09-10 15:29:54 -04:00
kit-voron2-2018.cfg
idle_timeout: Move timeout handling from toolhead.py to new extras module
2018-07-16 10:32:48 -04:00
printer-adimlab-2018.cfg
config: ADIMlab Add support for LCD knob and caselight
2018-10-19 11:10:32 -04:00
printer-anet-a8-2017.cfg
…
printer-anet-e10-2018.cfg
config: anet e10 update
2018-06-19 11:36:52 -04:00
printer-anycubic-i3-mega-2017.cfg
…
printer-anycubic-kossel-2016.cfg
config: Add display buttons pins for anycubic kossel pulley 2016 ( #614 )
2018-09-06 18:31:55 -04:00
printer-anycubic-kossel-plus-2017.cfg
config: Add encoder pins to printer-anycubic-kossel-plus-2017.cfg
2018-10-25 21:34:49 -04:00
printer-creality-cr10-2017.cfg
config: Add encoder pins to Creality Ender2 and CR10 configs
2018-09-02 11:52:20 -04:00
printer-creality-cr10mini-2017.cfg
config: Add encoder and click pins for CR-10 mini
2018-09-30 12:52:06 -04:00
printer-creality-cr10s-2017.cfg
config: Add display buttons to printer-creality-cr10s-2017.cfg
2018-10-20 19:27:53 -04:00
printer-creality-ender2-2017.cfg
config: Add encoder pins to Creality Ender2 and CR10 configs
2018-09-02 11:52:20 -04:00
printer-creality-ender3-2018.cfg
config: Added pins for LCD encoder and button click on Creality Ender 3 ( #574 )
2018-08-26 23:05:13 -04:00
printer-lulzbot-taz6-2017.cfg
…
printer-makergear-m2-2012.cfg
endstop_phase: Move endstop phase homing code to new "extras" module
2018-10-16 13:09:23 -04:00
printer-seemecnc-rostock-max-v2-2015.cfg
…
printer-tronxy-x5s-2018.cfg
config: Fix printer-tronxy-x5s-2018.cfg file flags
2018-05-17 12:47:08 -04:00
printer-tronxy-x8-2018.cfg
Add Printer Configuration File for the Tronxy X8
2018-07-10 11:59:07 -04:00
printer-wanhao-duplicator-6-2016.cfg
config: Wanhao Duplicator 6 likely does not need "restart: command"
2018-09-25 14:29:05 -04:00
printer-wanhao-duplicator-i3-plus-2017.cfg
…
printer-wanhao-duplicator-i3-v2.1-2017.cfg
config: Updates to printer-wanhao-duplicator-i3-v2.1-2017.cfg
2018-08-27 08:45:04 -04:00
sample-bltouch.cfg
probe: Infer position_endstop when using probe:z_virtual_offset
2018-10-01 11:12:30 -04:00
3da7697c66