70 lines
3.2 KiB
Python
70 lines
3.2 KiB
Python
# Support for "dotstar" leds
|
|
#
|
|
# Copyright (C) 2019 Kevin O'Connor <kevin@koconnor.net>
|
|
#
|
|
# This file may be distributed under the terms of the GNU GPLv3 license.
|
|
import bus
|
|
|
|
BACKGROUND_PRIORITY_CLOCK = 0x7fffffff00000000
|
|
|
|
class PrinterDotstar:
|
|
def __init__(self, config):
|
|
self.printer = config.get_printer()
|
|
name = config.get_name().split()[1]
|
|
# Configure a software spi bus
|
|
ppins = self.printer.lookup_object('pins')
|
|
data_pin_params = ppins.lookup_pin(config.get('data_pin'))
|
|
clock_pin_params = ppins.lookup_pin(config.get('clock_pin'))
|
|
mcu = data_pin_params['chip']
|
|
if mcu is not clock_pin_params['chip']:
|
|
raise config.error("Dotstar pins must be on same mcu")
|
|
sw_spi_pins = (data_pin_params['pin'], data_pin_params['pin'],
|
|
clock_pin_params['pin'])
|
|
self.spi = bus.MCU_SPI(mcu, None, None, 0, 500000, sw_spi_pins)
|
|
# Initial color
|
|
self.chain_count = config.getint('chain_count', 1, minval=1)
|
|
red = config.getfloat('initial_RED', 0., minval=0., maxval=1.)
|
|
green = config.getfloat('initial_GREEN', 0., minval=0., maxval=1.)
|
|
blue = config.getfloat('initial_BLUE', 0., minval=0., maxval=1.)
|
|
red = int(red * 255. + .5)
|
|
blue = int(blue * 255. + .5)
|
|
green = int(green * 255. + .5)
|
|
color_data = [0xff, blue, green, red] * self.chain_count
|
|
self.color_data = [0, 0, 0, 0] + color_data + [0xff, 0xff, 0xff, 0xff]
|
|
self.printer.register_event_handler("klippy:connect", self.send_data)
|
|
# Register commands
|
|
self.gcode = self.printer.lookup_object('gcode')
|
|
self.gcode.register_mux_command("SET_LED", "LED", name,
|
|
self.cmd_SET_LED,
|
|
desc=self.cmd_SET_LED_help)
|
|
def send_data(self, minclock=0):
|
|
data = self.color_data
|
|
for d in [data[i:i+20] for i in range(0, len(data), 20)]:
|
|
self.spi.spi_send(d, minclock=minclock,
|
|
reqclock=BACKGROUND_PRIORITY_CLOCK)
|
|
cmd_SET_LED_help = "Set the color of an LED"
|
|
def cmd_SET_LED(self, params):
|
|
# Parse parameters
|
|
red = self.gcode.get_float('RED', params, 0., minval=0., maxval=1.)
|
|
green = self.gcode.get_float('GREEN', params, 0., minval=0., maxval=1.)
|
|
blue = self.gcode.get_float('BLUE', params, 0., minval=0., maxval=1.)
|
|
transmit = self.gcode.get_int('TRANSMIT', params, 1)
|
|
red = int(red * 255. + .5)
|
|
blue = int(blue * 255. + .5)
|
|
green = int(green * 255. + .5)
|
|
color_data = [0xff, blue, green, red]
|
|
if 'INDEX' in params:
|
|
index = self.gcode.get_int('INDEX', params,
|
|
minval=1, maxval=self.chain_count)
|
|
self.color_data[index*4:(index+1)*4] = color_data
|
|
else:
|
|
self.color_data[4:-4] = color_data * self.chain_count
|
|
# Send command
|
|
if not transmit:
|
|
return
|
|
print_time = self.printer.lookup_object('toolhead').get_last_move_time()
|
|
self.send_data(self.spi.get_mcu().print_time_to_clock(print_time))
|
|
|
|
def load_config_prefix(config):
|
|
return PrinterDotstar(config)
|