3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
klipper/docs
History
Kevin O'Connor 4f66a467e3 config: Create new sample-aliases.cfg with standard aliases 
Create a sample-aliases.cfg with all the aliases that are currently
hardcoded in the klippy.pins.py module.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 		2021-03-25 10:49:17 -04:00
..
_layouts docs: Add indentation to generated table-of-contents on klipper3d.org site 2020-12-03 19:24:40 -05:00
img docs: Updated measuring resonances doc on max_accel suggestions 2021-03-20 13:24:43 -04:00
prints
…
API_Server.md docs: Document "register_remote_method" endpoint 2020-11-04 18:32:30 -05:00
BLTouch.md bltouch: Recommend using a pullup on the sensor_pin 2020-12-11 11:01:44 -05:00
Bed_Level.md
…
Bed_Mesh.md
…
Benchmarks.md docs: Update PRU command dispatch benchmark 2021-02-12 14:08:33 -05:00
Bootloaders.md
…
CANBUS.md docs: Update CAN bus documents 2021-03-13 11:33:56 -05:00
CANBUS_protocol.md docs: Update CAN bus documents 2021-03-13 11:33:56 -05:00
CNAME
…
CONTRIBUTING.md docs: Updates to Contact.md and use of github issues 2021-01-31 19:13:47 -05:00
Code_Overview.md
…
Command_Templates.md bme280: Add support for BMP280 and BME680 sensors (#4040) 2021-03-15 11:50:29 -04:00
Config_Changes.md docs: Update CAN bus documents 2021-03-13 11:33:56 -05:00
Config_Reference.md replicape: Don't require a host alias for the enable_pin default 2021-03-25 10:49:17 -04:00
Config_checks.md stepper: Calculate step_distance from rotation_distance 2020-12-18 10:30:32 -05:00
Contact.md docs: Update Contact.md to clarify use of mailing list 2021-02-05 19:01:17 -05:00
Debugging.md console: Make baud an optional parameter 2021-03-02 11:38:50 -05:00
Delta_Calibrate.md
…
Endstop_Phase.md endstop_phase: Obtain phases directly from stepper microsteps config 2020-12-18 10:30:32 -05:00
Example_Configs.md docs: Updates to Example_Configs.md 2021-03-22 22:01:30 -04:00
FAQ.md config: Create new sample-aliases.cfg with standard aliases 2021-03-25 10:49:17 -04:00
Features.md docs: Use relative links for files outside the docs/ directory 2020-12-03 15:06:58 -05:00
G-Codes.md filament_motion_sensor: Add filament_motion_sensor (#3857) 2021-03-14 21:36:19 -04:00
HallFilamentWidthSensor.md
…
Installation.md docs: Use relative links for files outside the docs/ directory 2020-12-03 15:06:58 -05:00
Kinematics.md
…
MCU_Commands.md gpiocmds: Merge digital output and soft pwm code 2020-12-10 12:06:26 -05:00
Manual_Level.md
…
Measuring_Resonances.md docs: Added a note about different ADLX345 PCB designs 2021-03-20 13:24:43 -04:00
Overview.md docs: Move Example_Configs.md reference in Overview.md 2021-03-22 22:12:26 -04:00
Packaging.md
…
Pressure_Advance.md docs: Minor wording change to Pressure_Advance.md 2021-02-08 11:46:40 -05:00
Probe_Calibrate.md stepper: Calculate step_distance from rotation_distance 2020-12-18 10:30:32 -05:00
Protocol.md
…
README.md
…
RPi_microcontroller.md docs: Use relative links for files outside the docs/ directory 2020-12-03 15:06:58 -05:00
Releases.md
…
Resonance_Compensation.md docs: Input Shaper and Resonances docs improvements (#3627) 2020-12-17 17:44:46 -05:00
Rotation_Distance.md docs: Minor reword to Rotation_Distance.md 2021-01-10 11:09:45 -05:00
SDCard_Updates.md docs: add documentation for SD Card firmware updates 2021-02-05 19:37:56 -05:00
Slicers.md docs: Use relative links for files outside the docs/ directory 2020-12-03 15:06:58 -05:00
TMC_Drivers.md docs: Update TMC_Drivers.md with note on SPI failures on TMC driver checks 2021-03-16 14:49:29 -04:00
TSL1401CL_Filament_Width_Sensor.md
…
_config.yml
…
beaglebone.md
…
developer-certificate-of-origin
…
skew_correction.md
…

README.md

Welcome to the Klipper documentation. The overview document is a good starting point.