..
chelper
stepcompress: Improve numerical stability of step+dir+step filter
2021-04-11 12:19:57 -04:00
extras
screws_tilt_adjust: Add MAX_DEVIATION parameter for bed level invariant.
2021-04-28 11:53:18 -04:00
kinematics
rotary_delta: Fix typo in get_status() homed_axes
2021-03-29 23:05:34 -04:00
clocksync.py
clocksync: Don't filter any of the initial syncronization clock messages
2020-05-02 11:08:02 -04:00
configfile.py
configfile: Add printer.configfile.settings command template parameter
2021-01-20 16:25:25 -05:00
console.py
console: Add support for connecting via CAN bus
2021-03-13 11:29:41 -05:00
gcode.py
gcode: Move definition of CommandError and Coord from homing.py to gcode.py
2021-01-08 12:07:45 -05:00
klippy.py
klippy: Fix check for duplicate objects
2021-03-05 13:59:20 -05:00
mathutil.py
mathutil: Disable queuelogger in background_coordinate_descent()
2019-12-17 09:51:45 -05:00
mcu.py
mcu: Update hints for "Timer too close" and "No next step" errors
2021-03-19 08:35:21 -04:00
msgproto.py
buildcommands: Extend number of available mcu messages from 96 to 128
2021-02-18 15:21:32 -05:00
parsedump.py
…
pins.py
…
queuelogger.py
webhooks: Add client_info parameter to "info" webhook
2020-08-26 10:12:58 -04:00
reactor.py
reactor: Record time of recent gc collection sweeps
2020-09-17 02:06:20 -04:00
serialhdl.py
serialhdl: Only load the CAN module if CAN bus is configured
2021-03-13 15:02:41 -05:00
stepper.py
stepper: Register a config default for calculated homing_positive_dir
2021-04-16 11:42:39 -04:00
toolhead.py
toolhead: Export the print_stalls value via get_status()
2021-04-09 20:44:27 -04:00
util.py
util: Improve Python3 compatibility
2020-06-15 17:15:53 -04:00
webhooks.py
webhooks: Fix use of deprecated Exception.message attribute ( #3781 )
2021-01-17 22:37:41 -05:00