..
chelper
serialqueue: Improve canbus timing
2022-07-29 11:40:54 -04:00
extras
extruder_stepper: Support configuring pressure advance from config
2022-09-01 14:53:12 -04:00
kinematics
extruder_stepper: Support configuring pressure advance from config
2022-09-01 14:53:12 -04:00
clocksync.py
msgblock: Add clock estimation helper functions
2021-06-09 18:58:35 -04:00
configfile.py
configfile: Expose options awaiting to be saved ( #5270 )
2022-06-20 12:10:57 -04:00
console.py
console: Add support for DUMP and FILEDUMP commands
2022-07-29 13:30:39 -04:00
gcode.py
gcode: Handle M117 and M118 commands that start with a special character
2022-01-18 11:34:40 -05:00
klippy.py
mcu: Delay reset signaling for usb to canbus bridge nodes
2022-07-29 11:40:54 -04:00
mathutil.py
mathutil: Disable queuelogger in background_coordinate_descent()
2019-12-17 09:51:45 -05:00
mcu.py
mcu: Delay reset signaling for usb to canbus bridge nodes
2022-07-29 11:40:54 -04:00
msgproto.py
spi_flash: Make SD updates more tolerant of flaky boards
2021-07-20 18:05:05 -04:00
parsedump.py
…
pins.py
pins: Improve pin description checks
2022-05-09 16:33:46 -04:00
queuelogger.py
klippy: Add Python2 module wrappers and use Python3 module naming
2021-10-04 14:36:08 -04:00
reactor.py
reactor: Add support for waiting on fds becoming writable
2022-07-06 09:54:44 -04:00
serialhdl.py
serialqueue: Improve canbus timing
2022-07-29 11:40:54 -04:00
stepper.py
extruder: Verify trapq is unmodified on default SET_PRESSURE_ADVANCE
2022-03-04 13:38:59 -05:00
toolhead.py
toolhead: Fix toolhead stop on SET_VELOCITY_LIMIT ( #5053 )
2021-12-30 18:56:24 -05:00
util.py
util: Use regular str() type in get_git_version() on Python2
2021-10-31 13:52:31 -04:00
webhooks.py
webhooks: Close clients that become unresponsive
2022-07-06 09:54:44 -04:00
5d9ff75d02