264 lines
11 KiB
Python
264 lines
11 KiB
Python
# Support for reading acceleration data from an mpu9250 chip
|
|
#
|
|
# Copyright (C) 2022 Harry Beyel <harry3b9@gmail.com>
|
|
# Copyright (C) 2020-2021 Kevin O'Connor <kevin@koconnor.net>
|
|
#
|
|
# This file may be distributed under the terms of the GNU GPLv3 license.
|
|
import logging, time
|
|
from . import bus, motion_report, adxl345, bulk_sensor
|
|
|
|
MPU9250_ADDR = 0x68
|
|
|
|
MPU_DEV_IDS = {
|
|
0x74: "mpu-9515",
|
|
0x73: "mpu-9255",
|
|
0x71: "mpu-9250",
|
|
0x70: "mpu-6500",
|
|
0x68: "mpu-6050",
|
|
#everything above are normal MPU IDs
|
|
0x75: "mpu-unknown (DEFECTIVE! USE WITH CAUTION!)",
|
|
0x69: "mpu-unknown (DEFECTIVE! USE WITH CAUTION!)",
|
|
}
|
|
|
|
# MPU9250 registers
|
|
REG_DEVID = 0x75
|
|
REG_FIFO_EN = 0x23
|
|
REG_SMPLRT_DIV = 0x19
|
|
REG_CONFIG = 0x1A
|
|
REG_ACCEL_CONFIG = 0x1C
|
|
REG_ACCEL_CONFIG2 = 0x1D
|
|
REG_USER_CTRL = 0x6A
|
|
REG_PWR_MGMT_1 = 0x6B
|
|
REG_PWR_MGMT_2 = 0x6C
|
|
|
|
SAMPLE_RATE_DIVS = { 4000:0x00 }
|
|
|
|
SET_CONFIG = 0x01 # FIFO mode 'stream' style
|
|
SET_ACCEL_CONFIG = 0x10 # 8g full scale
|
|
SET_ACCEL_CONFIG2 = 0x08 # 1046Hz BW, 0.503ms delay 4kHz sample rate
|
|
SET_PWR_MGMT_1_WAKE = 0x00
|
|
SET_PWR_MGMT_1_SLEEP= 0x40
|
|
SET_PWR_MGMT_2_ACCEL_ON = 0x07
|
|
SET_PWR_MGMT_2_OFF = 0x3F
|
|
|
|
FREEFALL_ACCEL = 9.80665 * 1000.
|
|
# SCALE = 1/4096 g/LSB @8g scale * Earth gravity in mm/s**2
|
|
SCALE = 0.000244140625 * FREEFALL_ACCEL
|
|
|
|
FIFO_SIZE = 512
|
|
|
|
MIN_MSG_TIME = 0.100
|
|
|
|
BYTES_PER_SAMPLE = 6
|
|
SAMPLES_PER_BLOCK = 8
|
|
|
|
API_UPDATES = 0.100
|
|
|
|
# Printer class that controls MPU9250 chip
|
|
class MPU9250:
|
|
def __init__(self, config):
|
|
self.printer = config.get_printer()
|
|
adxl345.AccelCommandHelper(config, self)
|
|
self.query_rate = 0
|
|
am = {'x': (0, SCALE), 'y': (1, SCALE), 'z': (2, SCALE),
|
|
'-x': (0, -SCALE), '-y': (1, -SCALE), '-z': (2, -SCALE)}
|
|
axes_map = config.getlist('axes_map', ('x','y','z'), count=3)
|
|
if any([a not in am for a in axes_map]):
|
|
raise config.error("Invalid mpu9250 axes_map parameter")
|
|
self.axes_map = [am[a.strip()] for a in axes_map]
|
|
self.data_rate = config.getint('rate', 4000)
|
|
if self.data_rate not in SAMPLE_RATE_DIVS:
|
|
raise config.error("Invalid rate parameter: %d" % (self.data_rate,))
|
|
# Setup mcu sensor_mpu9250 bulk query code
|
|
self.i2c = bus.MCU_I2C_from_config(config,
|
|
default_addr=MPU9250_ADDR,
|
|
default_speed=400000)
|
|
self.mcu = mcu = self.i2c.get_mcu()
|
|
self.oid = oid = mcu.create_oid()
|
|
self.query_mpu9250_cmd = self.query_mpu9250_end_cmd = None
|
|
self.query_mpu9250_status_cmd = None
|
|
mcu.register_config_callback(self._build_config)
|
|
self.bulk_queue = bulk_sensor.BulkDataQueue(mcu, "mpu9250_data", oid)
|
|
# Clock tracking
|
|
self.last_sequence = self.max_query_duration = 0
|
|
self.last_limit_count = self.last_error_count = 0
|
|
chip_smooth = self.data_rate * API_UPDATES * 2
|
|
self.clock_sync = bulk_sensor.ClockSyncRegression(mcu, chip_smooth)
|
|
# API server endpoints
|
|
self.api_dump = motion_report.APIDumpHelper(
|
|
self.printer, self._api_update, self._api_startstop, API_UPDATES)
|
|
self.name = config.get_name().split()[-1]
|
|
wh = self.printer.lookup_object('webhooks')
|
|
wh.register_mux_endpoint("mpu9250/dump_mpu9250", "sensor", self.name,
|
|
self._handle_dump_mpu9250)
|
|
def _build_config(self):
|
|
cmdqueue = self.i2c.get_command_queue()
|
|
self.mcu.add_config_cmd("config_mpu9250 oid=%d i2c_oid=%d"
|
|
% (self.oid, self.i2c.get_oid()))
|
|
self.mcu.add_config_cmd("query_mpu9250 oid=%d clock=0 rest_ticks=0"
|
|
% (self.oid,), on_restart=True)
|
|
self.query_mpu9250_cmd = self.mcu.lookup_command(
|
|
"query_mpu9250 oid=%c clock=%u rest_ticks=%u", cq=cmdqueue)
|
|
self.query_mpu9250_end_cmd = self.mcu.lookup_query_command(
|
|
"query_mpu9250 oid=%c clock=%u rest_ticks=%u",
|
|
"mpu9250_status oid=%c clock=%u query_ticks=%u next_sequence=%hu"
|
|
" buffered=%c fifo=%u limit_count=%hu", oid=self.oid, cq=cmdqueue)
|
|
self.query_mpu9250_status_cmd = self.mcu.lookup_query_command(
|
|
"query_mpu9250_status oid=%c",
|
|
"mpu9250_status oid=%c clock=%u query_ticks=%u next_sequence=%hu"
|
|
" buffered=%c fifo=%u limit_count=%hu", oid=self.oid, cq=cmdqueue)
|
|
def read_reg(self, reg):
|
|
params = self.i2c.i2c_read([reg], 1)
|
|
return bytearray(params['response'])[0]
|
|
|
|
def set_reg(self, reg, val, minclock=0):
|
|
self.i2c.i2c_write([reg, val & 0xFF], minclock=minclock)
|
|
|
|
# Measurement collection
|
|
def is_measuring(self):
|
|
return self.query_rate > 0
|
|
def _extract_samples(self, raw_samples):
|
|
# Load variables to optimize inner loop below
|
|
(x_pos, x_scale), (y_pos, y_scale), (z_pos, z_scale) = self.axes_map
|
|
last_sequence = self.last_sequence
|
|
time_base, chip_base, inv_freq = self.clock_sync.get_time_translation()
|
|
# Process every message in raw_samples
|
|
count = seq = 0
|
|
samples = [None] * (len(raw_samples) * SAMPLES_PER_BLOCK)
|
|
for params in raw_samples:
|
|
seq_diff = (params['sequence'] - last_sequence) & 0xffff
|
|
seq_diff -= (seq_diff & 0x8000) << 1
|
|
seq = last_sequence + seq_diff
|
|
d = bytearray(params['data'])
|
|
msg_cdiff = seq * SAMPLES_PER_BLOCK - chip_base
|
|
|
|
for i in range(len(d) // BYTES_PER_SAMPLE):
|
|
d_xyz = d[i*BYTES_PER_SAMPLE:(i+1)*BYTES_PER_SAMPLE]
|
|
xhigh, xlow, yhigh, ylow, zhigh, zlow = d_xyz
|
|
# Merge and perform twos-complement
|
|
rx = ((xhigh << 8) | xlow) - ((xhigh & 0x80) << 9)
|
|
ry = ((yhigh << 8) | ylow) - ((yhigh & 0x80) << 9)
|
|
rz = ((zhigh << 8) | zlow) - ((zhigh & 0x80) << 9)
|
|
|
|
raw_xyz = (rx, ry, rz)
|
|
x = round(raw_xyz[x_pos] * x_scale, 6)
|
|
y = round(raw_xyz[y_pos] * y_scale, 6)
|
|
z = round(raw_xyz[z_pos] * z_scale, 6)
|
|
ptime = round(time_base + (msg_cdiff + i) * inv_freq, 6)
|
|
samples[count] = (ptime, x, y, z)
|
|
count += 1
|
|
self.clock_sync.set_last_chip_clock(seq * SAMPLES_PER_BLOCK + i)
|
|
del samples[count:]
|
|
return samples
|
|
|
|
def _update_clock(self, minclock=0):
|
|
# Query current state
|
|
for retry in range(5):
|
|
params = self.query_mpu9250_status_cmd.send([self.oid],
|
|
minclock=minclock)
|
|
fifo = params['fifo'] & 0x1fff
|
|
if fifo <= FIFO_SIZE:
|
|
break
|
|
else:
|
|
raise self.printer.command_error("Unable to query mpu9250 fifo")
|
|
mcu_clock = self.mcu.clock32_to_clock64(params['clock'])
|
|
seq_diff = (params['next_sequence'] - self.last_sequence) & 0xffff
|
|
self.last_sequence += seq_diff
|
|
buffered = params['buffered']
|
|
lc_diff = (params['limit_count'] - self.last_limit_count) & 0xffff
|
|
self.last_limit_count += lc_diff
|
|
duration = params['query_ticks']
|
|
if duration > self.max_query_duration:
|
|
# Skip measurement as a high query time could skew clock tracking
|
|
self.max_query_duration = max(2 * self.max_query_duration,
|
|
self.mcu.seconds_to_clock(.000005))
|
|
return
|
|
self.max_query_duration = 2 * duration
|
|
msg_count = (self.last_sequence * SAMPLES_PER_BLOCK
|
|
+ buffered // BYTES_PER_SAMPLE + fifo)
|
|
# The "chip clock" is the message counter plus .5 for average
|
|
# inaccuracy of query responses and plus .5 for assumed offset
|
|
# of mpu9250 hw processing time.
|
|
chip_clock = msg_count + 1
|
|
self.clock_sync.update(mcu_clock + duration // 2, chip_clock)
|
|
def _start_measurements(self):
|
|
if self.is_measuring():
|
|
return
|
|
# In case of miswiring, testing MPU9250 device ID prevents treating
|
|
# noise or wrong signal as a correctly initialized device
|
|
dev_id = self.read_reg(REG_DEVID)
|
|
if dev_id not in MPU_DEV_IDS.keys():
|
|
raise self.printer.command_error(
|
|
"Invalid mpu id (got %x).\n"
|
|
"This is generally indicative of connection problems\n"
|
|
"(e.g. faulty wiring) or a faulty chip."
|
|
% (dev_id))
|
|
else:
|
|
logging.info("Found %s with id %x"% (MPU_DEV_IDS[dev_id], dev_id))
|
|
# Setup chip in requested query rate
|
|
self.set_reg(REG_PWR_MGMT_1, SET_PWR_MGMT_1_WAKE)
|
|
self.set_reg(REG_PWR_MGMT_2, SET_PWR_MGMT_2_ACCEL_ON)
|
|
time.sleep(20. / 1000) # wait for accelerometer chip wake up
|
|
self.set_reg(REG_SMPLRT_DIV, SAMPLE_RATE_DIVS[self.data_rate])
|
|
self.set_reg(REG_CONFIG, SET_CONFIG)
|
|
self.set_reg(REG_ACCEL_CONFIG, SET_ACCEL_CONFIG)
|
|
self.set_reg(REG_ACCEL_CONFIG2, SET_ACCEL_CONFIG2)
|
|
|
|
# Start bulk reading
|
|
self.bulk_queue.clear_samples()
|
|
systime = self.printer.get_reactor().monotonic()
|
|
print_time = self.mcu.estimated_print_time(systime) + MIN_MSG_TIME
|
|
reqclock = self.mcu.print_time_to_clock(print_time)
|
|
rest_ticks = self.mcu.seconds_to_clock(4. / self.data_rate)
|
|
self.query_rate = self.data_rate
|
|
self.query_mpu9250_cmd.send([self.oid, reqclock, rest_ticks],
|
|
reqclock=reqclock)
|
|
logging.info("MPU9250 starting '%s' measurements", self.name)
|
|
# Initialize clock tracking
|
|
self.last_sequence = 0
|
|
self.last_limit_count = self.last_error_count = 0
|
|
self.clock_sync.reset(reqclock, 0)
|
|
self.max_query_duration = 1 << 31
|
|
self._update_clock(minclock=reqclock)
|
|
self.max_query_duration = 1 << 31
|
|
def _finish_measurements(self):
|
|
if not self.is_measuring():
|
|
return
|
|
# Halt bulk reading
|
|
params = self.query_mpu9250_end_cmd.send([self.oid, 0, 0])
|
|
self.query_rate = 0
|
|
self.bulk_queue.clear_samples()
|
|
logging.info("MPU9250 finished '%s' measurements", self.name)
|
|
self.set_reg(REG_PWR_MGMT_1, SET_PWR_MGMT_1_SLEEP)
|
|
self.set_reg(REG_PWR_MGMT_2, SET_PWR_MGMT_2_OFF)
|
|
|
|
# API interface
|
|
def _api_update(self, eventtime):
|
|
self._update_clock()
|
|
raw_samples = self.bulk_queue.pull_samples()
|
|
if not raw_samples:
|
|
return {}
|
|
samples = self._extract_samples(raw_samples)
|
|
if not samples:
|
|
return {}
|
|
return {'data': samples, 'errors': self.last_error_count,
|
|
'overflows': self.last_limit_count}
|
|
def _api_startstop(self, is_start):
|
|
if is_start:
|
|
self._start_measurements()
|
|
else:
|
|
self._finish_measurements()
|
|
def _handle_dump_mpu9250(self, web_request):
|
|
self.api_dump.add_client(web_request)
|
|
hdr = ('time', 'x_acceleration', 'y_acceleration', 'z_acceleration')
|
|
web_request.send({'header': hdr})
|
|
def start_internal_client(self):
|
|
cconn = self.api_dump.add_internal_client()
|
|
return adxl345.AccelQueryHelper(self.printer, cconn)
|
|
|
|
def load_config(config):
|
|
return MPU9250(config)
|
|
|
|
def load_config_prefix(config):
|
|
return MPU9250(config)
|