Kevin O'Connor e36122797b bltouch: Attempt to verify that the probe raises after each probe attempt ... Query the bltouch state during the pin_up command to try and verify that the probe does actually retract. This may be useful to detect if the bltouch enters into an "error" state. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>		2019-01-21 09:52:11 -05:00
..
chelper	winch: Add experimental support for cable winch kinematics	2018-12-24 11:38:59 -05:00
extras	bltouch: Attempt to verify that the probe raises after each probe attempt	2019-01-21 09:52:11 -05:00
kinematics	heater: take a gcode_id when setting up a heater (#1028)	2019-01-02 17:44:02 -05:00
clocksync.py	…
configfile.py	configfile: Strip trailing comments	2018-10-16 11:45:20 -04:00
console.py	console: Try to improve the description of the SUPPRESS command	2018-11-16 17:16:14 -05:00
gcode.py	klippy: Convert printer_state("ready") to an event handler	2019-01-08 10:59:43 -05:00
heater.py	heater: take a gcode_id when setting up a heater (#1028)	2019-01-02 17:44:02 -05:00
homing.py	bltouch: Verify probe always deploys during a homing operation	2019-01-21 09:52:11 -05:00
klippy.py	klippy: Report the first error generated	2019-01-11 12:41:55 -05:00
mathutil.py	…
mcu.py	bltouch: Attempt to verify that the probe raises after each probe attempt	2019-01-21 09:52:11 -05:00
msgproto.py	…
parsedump.py	…
pins.py	sam3: Add support for sam4s8c chips	2019-01-07 19:34:31 -05:00
queuelogger.py	…
reactor.py	reactor: support for delayed callbacks	2019-01-07 21:38:36 -05:00
serialhdl.py	…
stepper.py	endstop_phase: Move endstop phase homing code to new "extras" module	2018-10-16 13:09:23 -04:00
toolhead.py	klippy: Convert printer_state("shutdown") to an event handler	2019-01-08 10:59:43 -05:00
util.py	util: Don't crash when calling get_cpu_info on OS X (#1102)	2019-01-11 13:00:44 -05:00