3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
klipper/config
History
Alec B. Plumb daadb36cb4 gcode_button: Execute gcode when a button is pressed or released (#1745) 
An extra to execute gcode when a hardware button is pressed or released. Uses the jinja2 templating system.

Inspired by pull request #545 from Miguel Moitinho miguel@moitinho.net and pull request #1098 from Paulo Drugos paulodrugos@gmail.com

Signed-off-by: Alec Plumb <alec@etherwalker.com>
 		2019-06-21 18:06:31 -04:00
..
avrsim.cfg
…
example-corexy.cfg config: Use .0025 as the default z step_distance in sample configs 2018-02-25 16:00:55 -05:00
example-delta.cfg probe: Move multi-sampling capability from ProbePointsHelper to Probe 2019-06-06 10:08:58 -04:00
example-extras.cfg gcode_button: Execute gcode when a button is pressed or released (#1745) 2019-06-21 18:06:31 -04:00
example-menu.cfg menu: enhancements 2019-01-07 21:39:50 -05:00
example-multi-mcu.cfg docs: Update documentation to note use of /dev/serial/by-path/ 2018-06-01 17:22:03 -04:00
example-polar.cfg polar: Experimental support for polar kinematics 2018-12-24 11:38:59 -05:00
example-winch.cfg winch: Add experimental support for cable winch kinematics 2018-12-24 11:38:59 -05:00
example.cfg thermistor: Add support for printers with an "inline_resistor" 2019-06-02 10:59:23 -04:00
generic-azteeg-x5-mini-v3.cfg config: Clarify which boards use lpc1768 vs lpc1769 when known 2019-06-20 11:23:30 -04:00
generic-bigtreetech-skr-v1.1.cfg config: Clarify which boards use lpc1768 vs lpc1769 when known 2019-06-20 11:23:30 -04:00
generic-bigtreetech-skr-v1.3.cfg config: Clarify which boards use lpc1768 vs lpc1769 when known 2019-06-20 11:23:30 -04:00
generic-cramps.cfg pru: Disable ADC reading directly from the PRU 2018-06-27 12:10:25 -04:00
generic-duet2-maestro.cfg config: Add LCD settings to config/generic-duet2-maestro.cfg 2019-06-13 11:29:55 -04:00
generic-duet2.cfg atsam: Use enumerations for buses and reserve pins 2019-04-04 18:29:31 -04:00
generic-einsy-rambo.cfg tmc2130: Initial support for sensorless homing 2018-05-25 11:38:23 -04:00
generic-fysetc-f6.cfg config: Force PB0 high in fysetc f6 config 2019-05-24 18:07:41 -04:00
generic-gt2560.cfg config: Added example config file for Geeetech gt2560 controller. 2019-01-28 11:20:01 -05:00
generic-melzi.cfg config: Use consistent advice on flashing the Melzi board 2018-11-13 14:32:52 -05:00
generic-mini-rambo.cfg config: Use fastest PWM time in mini-rambo PWM DAC config 2018-09-11 09:40:48 -04:00
generic-minitronics1.cfg config: Add a generic-minitronics1.cfg example config file 2018-12-20 11:09:20 -05:00
generic-printrboard.cfg config: Reduce the stepper current in the example printrboard config 2019-03-14 10:44:02 -04:00
generic-radds.cfg config: Added encoder pins to radds example config 2019-01-02 17:46:06 -05:00
generic-rambo.cfg config: Fix hd44780 typo in rambo and ramps example configs 2018-03-06 13:15:09 -05:00
generic-ramps.cfg config: pin mapping for ender 3 stock display and encoder on ramps (#1075) 2019-01-06 11:51:27 -05:00
generic-re-arm.cfg config: Clarify which boards use lpc1768 vs lpc1769 when known 2019-06-20 11:23:30 -04:00
generic-replicape.cfg replicape: add support for Linux hardware PWM (#1443) 2019-04-06 13:51:51 -04:00
generic-rumba.cfg config: Update extra extruder pins in generic-rumba.cfg 2019-03-14 11:48:25 -04:00
generic-smoothieboard.cfg lpc176x: Add support for flashing via "make flash" 2019-03-08 22:22:41 -05:00
kit-voron2-250mm.cfg probe: Move multi-sampling capability from ProbePointsHelper to Probe 2019-06-06 10:08:58 -04:00
kit-zav3d-2019.cfg probe: Move multi-sampling capability from ProbePointsHelper to Probe 2019-06-06 10:08:58 -04:00
printer-adimlab-2018.cfg config: ADIMlab Add support for LCD knob and caselight 2018-10-19 11:10:32 -04:00
printer-anet-a8-2017.cfg config: Add button support for anet a8 2019-04-19 10:43:22 -04:00
printer-anet-e10-2018.cfg config: anet e10 update 2018-06-19 11:36:52 -04:00
printer-anycubic-4max-2018.cfg config: Added Anycubic 4Max printer config file 2019-03-22 13:02:01 -04:00
printer-anycubic-i3-mega-2017.cfg config: Add a "printer-" prefix to example printer config files 2018-02-11 14:58:48 -05:00
printer-anycubic-kossel-2016.cfg config: Make the Anycubic delta configurations as similar as possible 2018-11-25 17:14:16 -05:00
printer-anycubic-kossel-plus-2017.cfg config: Make the Anycubic delta configurations as similar as possible 2018-11-25 17:14:16 -05:00
printer-creality-cr10-2017.cfg config: Use "ATC Semitec 104GT-2" for CR10 (and similar) heater beds 2019-02-08 12:20:16 -05:00
printer-creality-cr10mini-2017.cfg config: Use "ATC Semitec 104GT-2" for CR10 (and similar) heater beds 2019-02-08 12:20:16 -05:00
printer-creality-cr10s-2017.cfg config: Use "ATC Semitec 104GT-2" for CR10 (and similar) heater beds 2019-02-08 12:20:16 -05:00
printer-creality-cr20-2018.cfg config: Fix CR-20 click pin polarity 2018-12-15 18:38:03 -05:00
printer-creality-ender2-2017.cfg config: Use consistent advice on flashing the Melzi board 2018-11-13 14:32:52 -05:00
printer-creality-ender3-2018.cfg config: Update printer-creality-ender3-2018.cfg (#959) 2018-12-05 16:43:14 -05:00
printer-creality-ender5-2019.cfg config: Add Creality Ender 5 2019 2019-05-01 15:25:42 -04:00
printer-lulzbot-taz6-2017.cfg display: Add initial support for LCD screens attached to an MCU 2018-03-06 11:30:46 -05:00
printer-makergear-m2-2012.cfg endstop_phase: Move endstop phase homing code to new "extras" module 2018-10-16 13:09:23 -04:00
printer-micromake-d1-2016.cfg config: Add printer-micromake-d1-2016.cfg example config file 2018-12-18 20:59:43 -05:00
printer-seemecnc-rostock-max-v2-2015.cfg config: Add a "printer-" prefix to example printer config files 2018-02-11 14:58:48 -05:00
printer-tevo-flash-2018.cfg probe: Move multi-sampling capability from ProbePointsHelper to Probe 2019-06-06 10:08:58 -04:00
printer-tronxy-x5s-2018.cfg config: Add buttons to printer-tronxy-x5s-2018.cfg 2019-03-01 00:09:30 -05:00
printer-tronxy-x8-2018.cfg Add Printer Configuration File for the Tronxy X8 2018-07-10 11:59:07 -04:00
printer-velleman-k8200-2013.cfg config: Add printer-velleman-k8200-2013.cfg example config 2018-11-13 10:46:57 -05:00
printer-wanhao-duplicator-6-2016.cfg config: Wanhao Duplicator 6 likely does not need "restart: command" 2018-09-25 14:29:05 -04:00
printer-wanhao-duplicator-i3-plus-2017.cfg config: Use .0025 as the default z step_distance in sample configs 2018-02-25 16:00:55 -05:00
printer-wanhao-duplicator-i3-plus-mark2-2019.cfg config: Create printer-wanhao-duplicator-i3-plus-mark2-2019.cfg 2019-06-18 10:13:41 -04:00
printer-wanhao-duplicator-i3-v2.1-2017.cfg config: Use consistent advice on flashing the Melzi board 2018-11-13 14:32:52 -05:00
sample-macros.cfg config: Update M600 in sample-macros.cfg to use SAVE_GCODE_STATE 2019-05-31 10:29:09 -04:00
sample-probe-as-z-endstop.cfg config: Fix G90 use in sample-probe-as-z-endstop.cfg 2019-06-07 10:37:10 -04:00