121 lines
9.7 KiB
C
121 lines
9.7 KiB
C
/* ----------------------------------------------------------------------------
|
|
* SAM Software Package License
|
|
* ----------------------------------------------------------------------------
|
|
* Copyright (c) 2012, Atmel Corporation
|
|
*
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following condition is met:
|
|
*
|
|
* - Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the disclaimer below.
|
|
*
|
|
* Atmel's name may not be used to endorse or promote products derived from
|
|
* this software without specific prior written permission.
|
|
*
|
|
* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
|
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
|
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
|
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
|
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
* ----------------------------------------------------------------------------
|
|
*/
|
|
|
|
#ifndef _SAM3XA_TC2_INSTANCE_
|
|
#define _SAM3XA_TC2_INSTANCE_
|
|
|
|
/* ========== Register definition for TC2 peripheral ========== */
|
|
#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
|
|
#define REG_TC2_CCR0 (0x40088000U) /**< \brief (TC2) Channel Control Register (channel = 0) */
|
|
#define REG_TC2_CMR0 (0x40088004U) /**< \brief (TC2) Channel Mode Register (channel = 0) */
|
|
#define REG_TC2_SMMR0 (0x40088008U) /**< \brief (TC2) Stepper Motor Mode Register (channel = 0) */
|
|
#define REG_TC2_CV0 (0x40088010U) /**< \brief (TC2) Counter Value (channel = 0) */
|
|
#define REG_TC2_RA0 (0x40088014U) /**< \brief (TC2) Register A (channel = 0) */
|
|
#define REG_TC2_RB0 (0x40088018U) /**< \brief (TC2) Register B (channel = 0) */
|
|
#define REG_TC2_RC0 (0x4008801CU) /**< \brief (TC2) Register C (channel = 0) */
|
|
#define REG_TC2_SR0 (0x40088020U) /**< \brief (TC2) Status Register (channel = 0) */
|
|
#define REG_TC2_IER0 (0x40088024U) /**< \brief (TC2) Interrupt Enable Register (channel = 0) */
|
|
#define REG_TC2_IDR0 (0x40088028U) /**< \brief (TC2) Interrupt Disable Register (channel = 0) */
|
|
#define REG_TC2_IMR0 (0x4008802CU) /**< \brief (TC2) Interrupt Mask Register (channel = 0) */
|
|
#define REG_TC2_CCR1 (0x40088040U) /**< \brief (TC2) Channel Control Register (channel = 1) */
|
|
#define REG_TC2_CMR1 (0x40088044U) /**< \brief (TC2) Channel Mode Register (channel = 1) */
|
|
#define REG_TC2_SMMR1 (0x40088048U) /**< \brief (TC2) Stepper Motor Mode Register (channel = 1) */
|
|
#define REG_TC2_CV1 (0x40088050U) /**< \brief (TC2) Counter Value (channel = 1) */
|
|
#define REG_TC2_RA1 (0x40088054U) /**< \brief (TC2) Register A (channel = 1) */
|
|
#define REG_TC2_RB1 (0x40088058U) /**< \brief (TC2) Register B (channel = 1) */
|
|
#define REG_TC2_RC1 (0x4008805CU) /**< \brief (TC2) Register C (channel = 1) */
|
|
#define REG_TC2_SR1 (0x40088060U) /**< \brief (TC2) Status Register (channel = 1) */
|
|
#define REG_TC2_IER1 (0x40088064U) /**< \brief (TC2) Interrupt Enable Register (channel = 1) */
|
|
#define REG_TC2_IDR1 (0x40088068U) /**< \brief (TC2) Interrupt Disable Register (channel = 1) */
|
|
#define REG_TC2_IMR1 (0x4008806CU) /**< \brief (TC2) Interrupt Mask Register (channel = 1) */
|
|
#define REG_TC2_CCR2 (0x40088080U) /**< \brief (TC2) Channel Control Register (channel = 2) */
|
|
#define REG_TC2_CMR2 (0x40088084U) /**< \brief (TC2) Channel Mode Register (channel = 2) */
|
|
#define REG_TC2_SMMR2 (0x40088088U) /**< \brief (TC2) Stepper Motor Mode Register (channel = 2) */
|
|
#define REG_TC2_CV2 (0x40088090U) /**< \brief (TC2) Counter Value (channel = 2) */
|
|
#define REG_TC2_RA2 (0x40088094U) /**< \brief (TC2) Register A (channel = 2) */
|
|
#define REG_TC2_RB2 (0x40088098U) /**< \brief (TC2) Register B (channel = 2) */
|
|
#define REG_TC2_RC2 (0x4008809CU) /**< \brief (TC2) Register C (channel = 2) */
|
|
#define REG_TC2_SR2 (0x400880A0U) /**< \brief (TC2) Status Register (channel = 2) */
|
|
#define REG_TC2_IER2 (0x400880A4U) /**< \brief (TC2) Interrupt Enable Register (channel = 2) */
|
|
#define REG_TC2_IDR2 (0x400880A8U) /**< \brief (TC2) Interrupt Disable Register (channel = 2) */
|
|
#define REG_TC2_IMR2 (0x400880ACU) /**< \brief (TC2) Interrupt Mask Register (channel = 2) */
|
|
#define REG_TC2_BCR (0x400880C0U) /**< \brief (TC2) Block Control Register */
|
|
#define REG_TC2_BMR (0x400880C4U) /**< \brief (TC2) Block Mode Register */
|
|
#define REG_TC2_QIER (0x400880C8U) /**< \brief (TC2) QDEC Interrupt Enable Register */
|
|
#define REG_TC2_QIDR (0x400880CCU) /**< \brief (TC2) QDEC Interrupt Disable Register */
|
|
#define REG_TC2_QIMR (0x400880D0U) /**< \brief (TC2) QDEC Interrupt Mask Register */
|
|
#define REG_TC2_QISR (0x400880D4U) /**< \brief (TC2) QDEC Interrupt Status Register */
|
|
#define REG_TC2_FMR (0x400880D8U) /**< \brief (TC2) Fault Mode Register */
|
|
#define REG_TC2_WPMR (0x400880E4U) /**< \brief (TC2) Write Protect Mode Register */
|
|
#else
|
|
#define REG_TC2_CCR0 (*(WoReg*)0x40088000U) /**< \brief (TC2) Channel Control Register (channel = 0) */
|
|
#define REG_TC2_CMR0 (*(RwReg*)0x40088004U) /**< \brief (TC2) Channel Mode Register (channel = 0) */
|
|
#define REG_TC2_SMMR0 (*(RwReg*)0x40088008U) /**< \brief (TC2) Stepper Motor Mode Register (channel = 0) */
|
|
#define REG_TC2_CV0 (*(RoReg*)0x40088010U) /**< \brief (TC2) Counter Value (channel = 0) */
|
|
#define REG_TC2_RA0 (*(RwReg*)0x40088014U) /**< \brief (TC2) Register A (channel = 0) */
|
|
#define REG_TC2_RB0 (*(RwReg*)0x40088018U) /**< \brief (TC2) Register B (channel = 0) */
|
|
#define REG_TC2_RC0 (*(RwReg*)0x4008801CU) /**< \brief (TC2) Register C (channel = 0) */
|
|
#define REG_TC2_SR0 (*(RoReg*)0x40088020U) /**< \brief (TC2) Status Register (channel = 0) */
|
|
#define REG_TC2_IER0 (*(WoReg*)0x40088024U) /**< \brief (TC2) Interrupt Enable Register (channel = 0) */
|
|
#define REG_TC2_IDR0 (*(WoReg*)0x40088028U) /**< \brief (TC2) Interrupt Disable Register (channel = 0) */
|
|
#define REG_TC2_IMR0 (*(RoReg*)0x4008802CU) /**< \brief (TC2) Interrupt Mask Register (channel = 0) */
|
|
#define REG_TC2_CCR1 (*(WoReg*)0x40088040U) /**< \brief (TC2) Channel Control Register (channel = 1) */
|
|
#define REG_TC2_CMR1 (*(RwReg*)0x40088044U) /**< \brief (TC2) Channel Mode Register (channel = 1) */
|
|
#define REG_TC2_SMMR1 (*(RwReg*)0x40088048U) /**< \brief (TC2) Stepper Motor Mode Register (channel = 1) */
|
|
#define REG_TC2_CV1 (*(RoReg*)0x40088050U) /**< \brief (TC2) Counter Value (channel = 1) */
|
|
#define REG_TC2_RA1 (*(RwReg*)0x40088054U) /**< \brief (TC2) Register A (channel = 1) */
|
|
#define REG_TC2_RB1 (*(RwReg*)0x40088058U) /**< \brief (TC2) Register B (channel = 1) */
|
|
#define REG_TC2_RC1 (*(RwReg*)0x4008805CU) /**< \brief (TC2) Register C (channel = 1) */
|
|
#define REG_TC2_SR1 (*(RoReg*)0x40088060U) /**< \brief (TC2) Status Register (channel = 1) */
|
|
#define REG_TC2_IER1 (*(WoReg*)0x40088064U) /**< \brief (TC2) Interrupt Enable Register (channel = 1) */
|
|
#define REG_TC2_IDR1 (*(WoReg*)0x40088068U) /**< \brief (TC2) Interrupt Disable Register (channel = 1) */
|
|
#define REG_TC2_IMR1 (*(RoReg*)0x4008806CU) /**< \brief (TC2) Interrupt Mask Register (channel = 1) */
|
|
#define REG_TC2_CCR2 (*(WoReg*)0x40088080U) /**< \brief (TC2) Channel Control Register (channel = 2) */
|
|
#define REG_TC2_CMR2 (*(RwReg*)0x40088084U) /**< \brief (TC2) Channel Mode Register (channel = 2) */
|
|
#define REG_TC2_SMMR2 (*(RwReg*)0x40088088U) /**< \brief (TC2) Stepper Motor Mode Register (channel = 2) */
|
|
#define REG_TC2_CV2 (*(RoReg*)0x40088090U) /**< \brief (TC2) Counter Value (channel = 2) */
|
|
#define REG_TC2_RA2 (*(RwReg*)0x40088094U) /**< \brief (TC2) Register A (channel = 2) */
|
|
#define REG_TC2_RB2 (*(RwReg*)0x40088098U) /**< \brief (TC2) Register B (channel = 2) */
|
|
#define REG_TC2_RC2 (*(RwReg*)0x4008809CU) /**< \brief (TC2) Register C (channel = 2) */
|
|
#define REG_TC2_SR2 (*(RoReg*)0x400880A0U) /**< \brief (TC2) Status Register (channel = 2) */
|
|
#define REG_TC2_IER2 (*(WoReg*)0x400880A4U) /**< \brief (TC2) Interrupt Enable Register (channel = 2) */
|
|
#define REG_TC2_IDR2 (*(WoReg*)0x400880A8U) /**< \brief (TC2) Interrupt Disable Register (channel = 2) */
|
|
#define REG_TC2_IMR2 (*(RoReg*)0x400880ACU) /**< \brief (TC2) Interrupt Mask Register (channel = 2) */
|
|
#define REG_TC2_BCR (*(WoReg*)0x400880C0U) /**< \brief (TC2) Block Control Register */
|
|
#define REG_TC2_BMR (*(RwReg*)0x400880C4U) /**< \brief (TC2) Block Mode Register */
|
|
#define REG_TC2_QIER (*(WoReg*)0x400880C8U) /**< \brief (TC2) QDEC Interrupt Enable Register */
|
|
#define REG_TC2_QIDR (*(WoReg*)0x400880CCU) /**< \brief (TC2) QDEC Interrupt Disable Register */
|
|
#define REG_TC2_QIMR (*(RoReg*)0x400880D0U) /**< \brief (TC2) QDEC Interrupt Mask Register */
|
|
#define REG_TC2_QISR (*(RoReg*)0x400880D4U) /**< \brief (TC2) QDEC Interrupt Status Register */
|
|
#define REG_TC2_FMR (*(RwReg*)0x400880D8U) /**< \brief (TC2) Fault Mode Register */
|
|
#define REG_TC2_WPMR (*(RwReg*)0x400880E4U) /**< \brief (TC2) Write Protect Mode Register */
|
|
#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
|
|
|
|
#endif /* _SAM3XA_TC2_INSTANCE_ */
|