3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
klipper/docs
History
Kevin O'Connor df6528715e stepper: Automatically detect and handle shared stepper enable lines 
It's common for multiple steppers to use the same stepper enable
line.  Detect this and only create a single digital_out oid on the
micro-controller.

Also, prohibit any other pin from being used multiple times in the
config file.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 		2018-01-10 19:10:26 -05:00
..
img docs: Add an initial configuration checklist document 2017-12-26 20:54:37 -05:00
prints docs: Minor update to square.scad 2018-01-02 21:56:29 -05:00
CONTRIBUTING.md docs: Add a CONTRIBUTING document 2017-12-24 12:33:01 -05:00
Code_Overview.md docs: Add a section on time handling to Code_Overview.md 2017-09-27 15:11:15 -04:00
Config_checks.md docs: Add an initial configuration checklist document 2017-12-26 20:54:37 -05:00
Contact.md docs: Offer alternatives to ssh/scp/sftp 2017-12-21 17:34:35 -05:00
Debugging.md avr: Add SIMULAVR build option; don't show WATCHDOG or SERIAL_BAUD_U2X 2017-05-28 11:04:59 -04:00
FAQ.md docs: Add a table of contents to the FAQ 2018-01-05 11:42:00 -05:00
Features.md docs: Reword performance paragraph in Features.md 2017-09-27 13:59:47 -04:00
Installation.md docs: Update installation document with pointers to FAQ 2018-01-04 13:29:17 -05:00
Kinematics.md toolhead: Permit look-ahead between Z moves 2017-09-03 15:46:48 -04:00
MCU_Commands.md gpiocmds: Allow the start value for a pin to differ from the default_value 2017-10-12 11:59:27 -04:00
Overview.md docs: Add an initial configuration checklist document 2017-12-26 20:54:37 -05:00
Pressure_Advance.md docs: Note pressure_advance over 0.20 is unlikely to improve quality 2018-01-08 11:07:26 -05:00
Protocol.md docs: Use only single space at start of new sentence 2017-05-01 11:58:32 -04:00
README.md docs: Improve documentation for those starting in docs/ 2017-04-27 16:05:26 -04:00
Releases.md docs: Note version 0.5.0 release 2017-10-25 11:27:20 -04:00
Todo.md stepper: Automatically detect and handle shared stepper enable lines 2018-01-10 19:10:26 -05:00
beaglebone.md docs: Point to beaglebone.md from the main installation document 2017-10-11 21:03:13 -04:00
developer-certificate-of-origin docs: Add a CONTRIBUTING document 2017-12-24 12:33:01 -05:00

README.md

Welcome to the Klipper documentation. The overview document is a good starting point.