klipper

Клиппер

Go to file

Alec B. Plumb daadb36cb4 gcode_button: Execute gcode when a button is pressed or released (#1745 ) An extra to execute gcode when a hardware button is pressed or released. Uses the jinja2 templating system. Inspired by pull request #545 from Miguel Moitinho miguel@moitinho.net and pull request #1098 from Paulo Drugos paulodrugos@gmail.com Signed-off-by: Alec Plumb <alec@etherwalker.com>		2019-06-21 18:06:31 -04:00
config	gcode_button: Execute gcode when a button is pressed or released (#1745 )	2019-06-21 18:06:31 -04:00
docs	probe: Allow probe parameters to be specified as g-code parameters	2019-06-21 14:44:28 -04:00
klippy	gcode_button: Execute gcode when a button is pressed or released (#1745 )	2019-06-21 18:06:31 -04:00
lib	lib: Add stm32f0 hal and cmsis files	2019-03-24 12:10:11 -04:00
scripts	scripts: Update klippy-requirements.txt (#1744 )	2019-06-21 13:32:54 -04:00
src	lpc176x: Add more filtering to workaround adc hardware defect	2019-06-20 08:57:24 -04:00
test	config: Create printer-wanhao-duplicator-i3-plus-mark2-2019.cfg	2019-06-18 10:13:41 -04:00
.gitignore	util: Fix versioning when gitdir is absent (#809 )	2018-10-27 10:44:38 -04:00
.travis.yml	test: Update .travis.yml to list apt packages one per line	2018-08-17 09:47:57 -04:00
COPYING	Initial commit of source code.	2016-05-25 11:37:40 -04:00
Makefile	makefile: Fixed build on OSX	2019-05-20 16:49:16 -04:00
README.md	docs: Update main README file to point to website	2019-04-20 13:43:35 -04:00

README.md

Welcome to the Klipper project!

https://www.klipper3d.org/

Klipper is a 3d-Printer firmware. It combines the power of a general purpose computer with one or more micro-controllers. See the features document for more information on why you should use Klipper.

To begin using Klipper start by installing it.

Klipper is Free Software. See the license or read the documentation.