klipper/klippy
Kevin O'Connor da735ab312 toolhead: Make sure input_shaper movement starts after endstop checking
Add a dwell() to the start of drip_move() to ensure that input_shaper
movements scheduled in advance of the nominal move time aren't
scheduled prior to the homing start.  (Otherwise the stepper may move
prior to endstop checking, which can corrupt the "no movement"
checks.)

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-29 21:11:39 -04:00
..
chelper stepcompress: Add support for tracking history of queue_step commands 2021-03-13 15:19:43 -05:00
extras output_pin: Fix bug in setting of self.resend_interval 2021-03-27 14:52:21 -04:00
kinematics extruder: Support looking up an extruder position from a past time 2021-03-13 15:19:43 -05:00
clocksync.py clocksync: Don't filter any of the initial syncronization clock messages 2020-05-02 11:08:02 -04:00
configfile.py configfile: Add printer.configfile.settings command template parameter 2021-01-20 16:25:25 -05:00
console.py console: Add support for connecting via CAN bus 2021-03-13 11:29:41 -05:00
gcode.py gcode: Move definition of CommandError and Coord from homing.py to gcode.py 2021-01-08 12:07:45 -05:00
klippy.py klippy: Fix check for duplicate objects 2021-03-05 13:59:20 -05:00
mathutil.py mathutil: Disable queuelogger in background_coordinate_descent() 2019-12-17 09:51:45 -05:00
mcu.py mcu: Update hints for "Timer too close" and "No next step" errors 2021-03-19 08:35:21 -04:00
msgproto.py buildcommands: Extend number of available mcu messages from 96 to 128 2021-02-18 15:21:32 -05:00
parsedump.py
pins.py stepper: Move MCU_stepper from mcu.py to stepper.py 2019-11-12 17:32:18 -05:00
queuelogger.py webhooks: Add client_info parameter to "info" webhook 2020-08-26 10:12:58 -04:00
reactor.py reactor: Record time of recent gc collection sweeps 2020-09-17 02:06:20 -04:00
serialhdl.py serialhdl: Only load the CAN module if CAN bus is configured 2021-03-13 15:02:41 -05:00
stepper.py stepcompress: Add support for tracking history of queue_step commands 2021-03-13 15:19:43 -05:00
toolhead.py toolhead: Make sure input_shaper movement starts after endstop checking 2021-03-29 21:11:39 -04:00
util.py util: Improve Python3 compatibility 2020-06-15 17:15:53 -04:00
webhooks.py webhooks: Fix use of deprecated Exception.message attribute (#3781) 2021-01-17 22:37:41 -05:00