3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Клиппер
1,825 Commits 1 Branch 0 Tags 27 MiB
C 96.7%
Python 2.8%
C++ 0.3%
Go to file
Kevin O'Connor da68da7a63 atsamd: Add support for reference clock selection to SAMD21 
Add support for using the internal clocks (with USB clock recovery
mode if available) on the SAMD21.  Don't use the internal clock if the
external crystal is requested (instead use the PLL synced to the
external 32Khz signal).

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 		2019-02-22 09:07:26 -05:00
config config: Warn that cycle_time may not match when using hardware_pwm 2019-02-19 13:19:32 -05:00
docs docs: Warn against using the TMC2208 in standalone mode 2019-02-20 16:22:06 -05:00
klippy tmc2130: Use FieldHelper() to set/get driver fields 2019-02-21 11:35:58 -05:00
lib lib: Update samd51 to work with gcc and bootloaders 2019-01-28 20:02:16 -05:00
scripts kconfig: Remove Save and Load buttons from "make menuconfig" 2019-02-15 21:06:12 -05:00
src atsamd: Add support for reference clock selection to SAMD21 2019-02-22 09:07:26 -05:00
test config: Example config file for a stock 250mm build VORON2 printer 2019-02-13 12:07:20 -05:00
.gitignore util: Fix versioning when gitdir is absent (#809) 2018-10-27 10:44:38 -04:00
.travis.yml test: Update .travis.yml to list apt packages one per line 2018-08-17 09:47:57 -04:00
COPYING Initial commit of source code. 2016-05-25 11:37:40 -04:00
Makefile scripts: Add a test case for Ubuntu 18.04 compiler error 2018-12-22 13:13:31 -05:00
README.md docs: Add a features document 2016-12-20 22:31:46 -05:00

README.md

Welcome to the Klipper project!

This project implements a 3d-printer firmware. There are two parts to this firmware - code that runs on a micro-controller and code that runs on a host machine. The host software does the work to build a schedule of events, while the micro-controller software does the work to execute the provided schedule at the specified times.

See the features document to find out why you should use Klipper. To begin using Klipper start by installing it.

There is also developer documentation available.

License

Klipper is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.

Klipper is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with Klipper. If not, see http://www.gnu.org/licenses/.