3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Клиппер
2,762 Commits 1 Branch 0 Tags 27 MiB
C 96.7%
Python 2.8%
C++ 0.3%
Go to file
Arne Jansen ce35ee45d6 stm32: fix spi_transfer for stm32f0 
The current code accesses the DR as 32 bit. This enabled data packing mode,
effectively adding a 00 byte between each sent byte. The receive side had
similar problems.
To prevent this, all accesses are 8 bit now, even though this is not
necessary on stmf[14].

Signed-off-by: Arne Jansen <arne@die-jansens.de>
 		2020-01-23 11:10:39 -05:00
config config: Adding a config file for the monoprice mini delta (#2392) 2020-01-14 10:33:38 -05:00
docs docs: Update Config_Changes.md with actual bed_mesh merge date 2020-01-09 14:17:51 -05:00
klippy heater: add support for BME280 2020-01-13 22:29:50 -05:00
lib stm32f0: Remove hal based stm32f0 implementation 2020-01-14 17:08:01 -05:00
scripts scripts: Install "virtualenv setuptools==44.0.0" in install-octopi.sh 2020-01-12 18:22:14 -05:00
src stm32: fix spi_transfer for stm32f0 2020-01-23 11:10:39 -05:00
test stm32f0: Remove hal based stm32f0 implementation 2020-01-14 17:08:01 -05:00
.gitignore util: Fix versioning when gitdir is absent (#809) 2018-10-27 10:44:38 -04:00
.travis.yml test: Update .travis.yml to list apt packages one per line 2018-08-17 09:47:57 -04:00
COPYING Initial commit of source code. 2016-05-25 11:37:40 -04:00
Makefile Makefile: Use "tr -s" in compile_time_request.txt generation 2019-08-22 11:40:02 -04:00
README.md docs: Update main README file to point to website 2019-04-20 13:43:35 -04:00

README.md

Welcome to the Klipper project!

Klipper

https://www.klipper3d.org/

Klipper is a 3d-Printer firmware. It combines the power of a general purpose computer with one or more micro-controllers. See the features document for more information on why you should use Klipper.

To begin using Klipper start by installing it.

Klipper is Free Software. See the license or read the documentation.