..
avrsim.cfg
…
example-corexy.cfg
config: Use .0025 as the default z step_distance in sample configs
2018-02-25 16:00:55 -05:00
example-delta.cfg
screws_tilt_adjust: Add new screws_tilt_adjust tool ( #1367 )
2019-03-08 11:47:17 -05:00
example-extras.cfg
tmc5160: Add support for TMC5160 steppers ( #1637 )
2019-05-20 16:29:37 -04:00
example-menu.cfg
menu: enhancements
2019-01-07 21:39:50 -05:00
example-multi-mcu.cfg
docs: Update documentation to note use of /dev/serial/by-path/
2018-06-01 17:22:03 -04:00
example-polar.cfg
polar: Experimental support for polar kinematics
2018-12-24 11:38:59 -05:00
example-winch.cfg
winch: Add experimental support for cable winch kinematics
2018-12-24 11:38:59 -05:00
example.cfg
config: Advise against using hardware_pwm for fans
2019-05-23 19:29:24 -04:00
generic-azteeg-x5-mini-v3.cfg
lpc176x: Add support for flashing via "make flash"
2019-03-08 22:22:41 -05:00
generic-bigtreetech-skr-v1.1.cfg
config: Update generic-bigtreetech-skr-v1.1.cfg - make flash should now work
2019-04-05 19:51:10 -04:00
generic-bigtreetech-skr-v1.3.cfg
config: Update generic-bigtreetech-skr-v1.3.cfg with e0/e1 defs
2019-04-06 16:18:15 -04:00
generic-cramps.cfg
pru: Disable ADC reading directly from the PRU
2018-06-27 12:10:25 -04:00
generic-duet2.cfg
atsam: Use enumerations for buses and reserve pins
2019-04-04 18:29:31 -04:00
generic-einsy-rambo.cfg
tmc2130: Initial support for sensorless homing
2018-05-25 11:38:23 -04:00
generic-fysetc-f6.cfg
config: Force PB0 high in fysetc f6 config
2019-05-24 18:07:41 -04:00
generic-gt2560.cfg
config: Added example config file for Geeetech gt2560 controller.
2019-01-28 11:20:01 -05:00
generic-melzi.cfg
config: Use consistent advice on flashing the Melzi board
2018-11-13 14:32:52 -05:00
generic-mini-rambo.cfg
config: Use fastest PWM time in mini-rambo PWM DAC config
2018-09-11 09:40:48 -04:00
generic-minitronics1.cfg
config: Add a generic-minitronics1.cfg example config file
2018-12-20 11:09:20 -05:00
generic-printrboard.cfg
config: Reduce the stepper current in the example printrboard config
2019-03-14 10:44:02 -04:00
generic-radds.cfg
config: Added encoder pins to radds example config
2019-01-02 17:46:06 -05:00
generic-rambo.cfg
config: Fix hd44780 typo in rambo and ramps example configs
2018-03-06 13:15:09 -05:00
generic-ramps.cfg
config: pin mapping for ender 3 stock display and encoder on ramps ( #1075 )
2019-01-06 11:51:27 -05:00
generic-re-arm.cfg
lpc176x: Add support for flashing via "make flash"
2019-03-08 22:22:41 -05:00
generic-replicape.cfg
replicape: add support for Linux hardware PWM ( #1443 )
2019-04-06 13:51:51 -04:00
generic-rumba.cfg
config: Update extra extruder pins in generic-rumba.cfg
2019-03-14 11:48:25 -04:00
generic-smoothieboard.cfg
lpc176x: Add support for flashing via "make flash"
2019-03-08 22:22:41 -05:00
kit-voron2-250mm.cfg
config: Example config file for a stock 250mm build VORON2 printer
2019-02-13 12:07:20 -05:00
kit-zav3d-2019.cfg
config: Updates to kit-zav3d-2019.cfg
2019-05-01 14:50:06 -04:00
printer-adimlab-2018.cfg
config: ADIMlab Add support for LCD knob and caselight
2018-10-19 11:10:32 -04:00
printer-anet-a8-2017.cfg
config: Add button support for anet a8
2019-04-19 10:43:22 -04:00
printer-anet-e10-2018.cfg
config: anet e10 update
2018-06-19 11:36:52 -04:00
printer-anycubic-4max-2018.cfg
config: Added Anycubic 4Max printer config file
2019-03-22 13:02:01 -04:00
printer-anycubic-i3-mega-2017.cfg
…
printer-anycubic-kossel-2016.cfg
config: Make the Anycubic delta configurations as similar as possible
2018-11-25 17:14:16 -05:00
printer-anycubic-kossel-plus-2017.cfg
config: Make the Anycubic delta configurations as similar as possible
2018-11-25 17:14:16 -05:00
printer-creality-cr10-2017.cfg
config: Use "ATC Semitec 104GT-2" for CR10 (and similar) heater beds
2019-02-08 12:20:16 -05:00
printer-creality-cr10mini-2017.cfg
config: Use "ATC Semitec 104GT-2" for CR10 (and similar) heater beds
2019-02-08 12:20:16 -05:00
printer-creality-cr10s-2017.cfg
config: Use "ATC Semitec 104GT-2" for CR10 (and similar) heater beds
2019-02-08 12:20:16 -05:00
printer-creality-cr20-2018.cfg
config: Fix CR-20 click pin polarity
2018-12-15 18:38:03 -05:00
printer-creality-ender2-2017.cfg
config: Use consistent advice on flashing the Melzi board
2018-11-13 14:32:52 -05:00
printer-creality-ender3-2018.cfg
config: Update printer-creality-ender3-2018.cfg ( #959 )
2018-12-05 16:43:14 -05:00
printer-creality-ender5-2019.cfg
config: Add Creality Ender 5 2019
2019-05-01 15:25:42 -04:00
printer-lulzbot-taz6-2017.cfg
display: Add initial support for LCD screens attached to an MCU
2018-03-06 11:30:46 -05:00
printer-makergear-m2-2012.cfg
endstop_phase: Move endstop phase homing code to new "extras" module
2018-10-16 13:09:23 -04:00
printer-micromake-d1-2016.cfg
config: Add printer-micromake-d1-2016.cfg example config file
2018-12-18 20:59:43 -05:00
printer-seemecnc-rostock-max-v2-2015.cfg
…
printer-tevo-flash-2018.cfg
config: Update description of printer-tevo-flash-2018.cfg
2019-03-24 10:56:20 -04:00
printer-tronxy-x5s-2018.cfg
config: Add buttons to printer-tronxy-x5s-2018.cfg
2019-03-01 00:09:30 -05:00
printer-tronxy-x8-2018.cfg
Add Printer Configuration File for the Tronxy X8
2018-07-10 11:59:07 -04:00
printer-velleman-k8200-2013.cfg
config: Add printer-velleman-k8200-2013.cfg example config
2018-11-13 10:46:57 -05:00
printer-wanhao-duplicator-6-2016.cfg
config: Wanhao Duplicator 6 likely does not need "restart: command"
2018-09-25 14:29:05 -04:00
printer-wanhao-duplicator-i3-plus-2017.cfg
config: Use .0025 as the default z step_distance in sample configs
2018-02-25 16:00:55 -05:00
printer-wanhao-duplicator-i3-v2.1-2017.cfg
config: Use consistent advice on flashing the Melzi board
2018-11-13 14:32:52 -05:00
sample-macros.cfg
pause_resume: update documentation
2019-01-28 11:23:52 -05:00
sample-probe-as-z-endstop.cfg
config: Update sample-probe-as-z-endstop.cfg to use set_position_z=0
2019-01-07 10:26:04 -05:00
61530138a0