160 lines
7.3 KiB
Python
160 lines
7.3 KiB
Python
# Queued PWM gpio output
|
|
#
|
|
# Copyright (C) 2017-2023 Kevin O'Connor <kevin@koconnor.net>
|
|
#
|
|
# This file may be distributed under the terms of the GNU GPLv3 license.
|
|
import chelper
|
|
|
|
PIN_MIN_TIME = 0.100
|
|
MAX_SCHEDULE_TIME = 5.0
|
|
|
|
class error(Exception):
|
|
pass
|
|
|
|
class MCU_queued_pwm:
|
|
def __init__(self, pin_params):
|
|
self._mcu = pin_params['chip']
|
|
self._hardware_pwm = False
|
|
self._cycle_time = 0.100
|
|
self._max_duration = 2.
|
|
self._oid = self._mcu.create_oid()
|
|
ffi_main, ffi_lib = chelper.get_ffi()
|
|
self._stepqueue = ffi_main.gc(ffi_lib.stepcompress_alloc(self._oid),
|
|
ffi_lib.stepcompress_free)
|
|
self._mcu.register_stepqueue(self._stepqueue)
|
|
self._stepcompress_queue_mq_msg = ffi_lib.stepcompress_queue_mq_msg
|
|
self._mcu.register_config_callback(self._build_config)
|
|
self._pin = pin_params['pin']
|
|
self._invert = pin_params['invert']
|
|
self._start_value = self._shutdown_value = float(self._invert)
|
|
self._last_clock = self._cycle_ticks = 0
|
|
self._pwm_max = 0.
|
|
self._set_cmd_tag = None
|
|
def get_mcu(self):
|
|
return self._mcu
|
|
def setup_max_duration(self, max_duration):
|
|
self._max_duration = max_duration
|
|
def setup_cycle_time(self, cycle_time, hardware_pwm=False):
|
|
self._cycle_time = cycle_time
|
|
self._hardware_pwm = hardware_pwm
|
|
def setup_start_value(self, start_value, shutdown_value):
|
|
if self._invert:
|
|
start_value = 1. - start_value
|
|
shutdown_value = 1. - shutdown_value
|
|
self._start_value = max(0., min(1., start_value))
|
|
self._shutdown_value = max(0., min(1., shutdown_value))
|
|
def _build_config(self):
|
|
if self._max_duration and self._start_value != self._shutdown_value:
|
|
raise pins.error("Pin with max duration must have start"
|
|
" value equal to shutdown value")
|
|
cmd_queue = self._mcu.alloc_command_queue()
|
|
curtime = self._mcu.get_printer().get_reactor().monotonic()
|
|
printtime = self._mcu.estimated_print_time(curtime)
|
|
self._last_clock = self._mcu.print_time_to_clock(printtime + 0.200)
|
|
cycle_ticks = self._mcu.seconds_to_clock(self._cycle_time)
|
|
mdur_ticks = self._mcu.seconds_to_clock(self._max_duration)
|
|
if mdur_ticks >= 1<<31:
|
|
raise pins.error("PWM pin max duration too large")
|
|
if self._hardware_pwm:
|
|
self._pwm_max = self._mcu.get_constant_float("PWM_MAX")
|
|
self._mcu.add_config_cmd(
|
|
"config_pwm_out oid=%d pin=%s cycle_ticks=%d value=%d"
|
|
" default_value=%d max_duration=%d"
|
|
% (self._oid, self._pin, cycle_ticks,
|
|
self._start_value * self._pwm_max,
|
|
self._shutdown_value * self._pwm_max, mdur_ticks))
|
|
svalue = int(self._start_value * self._pwm_max + 0.5)
|
|
self._mcu.add_config_cmd("queue_pwm_out oid=%d clock=%d value=%d"
|
|
% (self._oid, self._last_clock, svalue),
|
|
on_restart=True)
|
|
self._set_cmd_tag = self._mcu.lookup_command(
|
|
"queue_pwm_out oid=%c clock=%u value=%hu",
|
|
cq=cmd_queue).get_command_tag()
|
|
return
|
|
# Software PWM
|
|
if self._shutdown_value not in [0., 1.]:
|
|
raise pins.error("shutdown value must be 0.0 or 1.0 on soft pwm")
|
|
if cycle_ticks >= 1<<31:
|
|
raise pins.error("PWM pin cycle time too large")
|
|
self._mcu.add_config_cmd(
|
|
"config_digital_out oid=%d pin=%s value=%d"
|
|
" default_value=%d max_duration=%d"
|
|
% (self._oid, self._pin, self._start_value >= 1.0,
|
|
self._shutdown_value >= 0.5, mdur_ticks))
|
|
self._mcu.add_config_cmd(
|
|
"set_digital_out_pwm_cycle oid=%d cycle_ticks=%d"
|
|
% (self._oid, cycle_ticks))
|
|
self._cycle_ticks = cycle_ticks
|
|
svalue = int(self._start_value * cycle_ticks + 0.5)
|
|
self._mcu.add_config_cmd(
|
|
"queue_digital_out oid=%d clock=%d on_ticks=%d"
|
|
% (self._oid, self._last_clock, svalue), is_init=True)
|
|
self._set_cmd_tag = self._mcu.lookup_command(
|
|
"queue_digital_out oid=%c clock=%u on_ticks=%u",
|
|
cq=cmd_queue).get_command_tag()
|
|
def set_pwm(self, print_time, value):
|
|
clock = self._mcu.print_time_to_clock(print_time)
|
|
minclock = self._last_clock
|
|
self._last_clock = clock
|
|
if self._invert:
|
|
value = 1. - value
|
|
max_count = self._cycle_ticks
|
|
if self._hardware_pwm:
|
|
max_count = self._pwm_max
|
|
v = int(max(0., min(1., value)) * max_count + 0.5)
|
|
data = (self._set_cmd_tag, self._oid, clock & 0xffffffff, v)
|
|
ret = self._stepcompress_queue_mq_msg(self._stepqueue, clock,
|
|
data, len(data))
|
|
if ret:
|
|
raise error("Internal error in stepcompress")
|
|
|
|
class PrinterOutputPin:
|
|
def __init__(self, config):
|
|
self.printer = config.get_printer()
|
|
ppins = self.printer.lookup_object('pins')
|
|
# Determine pin type
|
|
pin_params = ppins.lookup_pin(config.get('pin'), can_invert=True)
|
|
self.mcu_pin = MCU_queued_pwm(pin_params)
|
|
cycle_time = config.getfloat('cycle_time', 0.100, above=0.,
|
|
maxval=MAX_SCHEDULE_TIME)
|
|
hardware_pwm = config.getboolean('hardware_pwm', False)
|
|
self.mcu_pin.setup_cycle_time(cycle_time, hardware_pwm)
|
|
self.scale = config.getfloat('scale', 1., above=0.)
|
|
self.last_print_time = 0.
|
|
self.mcu_pin.setup_max_duration(0.)
|
|
# Determine start and shutdown values
|
|
self.last_value = config.getfloat(
|
|
'value', 0., minval=0., maxval=self.scale) / self.scale
|
|
self.shutdown_value = config.getfloat(
|
|
'shutdown_value', 0., minval=0., maxval=self.scale) / self.scale
|
|
self.mcu_pin.setup_start_value(self.last_value, self.shutdown_value)
|
|
# Register commands
|
|
pin_name = config.get_name().split()[1]
|
|
gcode = self.printer.lookup_object('gcode')
|
|
gcode.register_mux_command("SET_PIN", "PIN", pin_name,
|
|
self.cmd_SET_PIN,
|
|
desc=self.cmd_SET_PIN_help)
|
|
def get_status(self, eventtime):
|
|
return {'value': self.last_value}
|
|
def _set_pin(self, print_time, value):
|
|
if value == self.last_value:
|
|
return
|
|
print_time = max(print_time, self.last_print_time)
|
|
self.mcu_pin.set_pwm(print_time, value)
|
|
self.last_value = value
|
|
self.last_print_time = print_time
|
|
toolhead = self.printer.lookup_object('toolhead')
|
|
toolhead.note_kinematic_activity(print_time)
|
|
cmd_SET_PIN_help = "Set the value of an output pin"
|
|
def cmd_SET_PIN(self, gcmd):
|
|
# Read requested value
|
|
value = gcmd.get_float('VALUE', minval=0., maxval=self.scale)
|
|
value /= self.scale
|
|
# Obtain print_time and apply requested settings
|
|
toolhead = self.printer.lookup_object('toolhead')
|
|
toolhead.register_lookahead_callback(
|
|
lambda print_time: self._set_pin(print_time, value))
|
|
|
|
def load_config_prefix(config):
|
|
return PrinterOutputPin(config)
|