3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
klipper/docs
History
Kevin O'Connor c0c892d524 force_move: Add support for FORCE_MOVE command 
Add initial support for commands that will forcibly move a stepper
(without updating the kinematic classes with the new position).

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 		2018-07-26 12:44:07 -04:00
..
img docs: Update documentation with iterative solver changes 2018-06-20 09:26:10 -04:00
prints docs: Minor update to square.scad 2018-01-02 21:56:29 -05:00
CONTRIBUTING.md docs: Add a CONTRIBUTING document 2017-12-24 12:33:01 -05:00
Code_Overview.md docs: Add a section with micro-controller porting tips to Code_Overview.md 2018-07-11 14:40:39 -04:00
Config_checks.md docs: Recommend running PID_CALIBRATE in Config_checks.md 2018-03-18 12:43:41 -04:00
Contact.md docs: Expand on why it is important to provide the log in Contact.md 2018-07-08 20:30:35 -04:00
Debugging.md docs: Update Debugging.md with information on logextract 2018-01-11 13:48:40 -05:00
FAQ.md toolhead: Replace junction_deviation with square_corner_velocity 2018-07-16 10:32:43 -04:00
Features.md docs: Update main documentation to not Smoothieboard support 2018-07-08 11:01:54 -04:00
G-Codes.md force_move: Add support for FORCE_MOVE command 2018-07-26 12:44:07 -04:00
Installation.md docs: Update main documentation to not Smoothieboard support 2018-07-08 11:01:54 -04:00
Kinematics.md docs: Update documentation with iterative solver changes 2018-06-20 09:26:10 -04:00
MCU_Commands.md basecmd: Rename get_status to get_clock 2018-05-29 10:57:29 -04:00
Overview.md docs: Add a G-Codes.md file with the list of available commands 2018-03-08 14:11:20 -05:00
Pressure_Advance.md docs: Note pressure_advance over 0.20 is unlikely to improve quality 2018-01-08 11:07:26 -05:00
Protocol.md docs: Use only single space at start of new sentence 2017-05-01 11:58:32 -04:00
README.md docs: Improve documentation for those starting in docs/ 2017-04-27 16:05:26 -04:00
Releases.md docs: Update release notes for v0.6.0 release 2018-03-31 14:04:39 -04:00
Todo.md docs: Remove lpc176x item from Todo 2018-05-25 13:56:54 -04:00
beaglebone.md pru: Disable ADC reading directly from the PRU 2018-06-27 12:10:25 -04:00
developer-certificate-of-origin docs: Add a CONTRIBUTING document 2017-12-24 12:33:01 -05:00
issue_template.md docs: Add github issue template 2018-01-31 14:30:05 -05:00
stm32f1.md stm32f1: add SPI support 2018-07-07 11:05:33 -04:00

README.md

Welcome to the Klipper documentation. The overview document is a good starting point.