.. |
img
|
docs: Try to make the klippy.log bug reporting more clear
|
2018-01-21 13:08:31 -05:00 |
prints
|
docs: Minor update to square.scad
|
2018-01-02 21:56:29 -05:00 |
CONTRIBUTING.md
|
docs: Add a CONTRIBUTING document
|
2017-12-24 12:33:01 -05:00 |
Code_Overview.md
|
docs: Add a section on adding new host modules to Code_Overview.md
|
2018-03-28 13:12:41 -04:00 |
Config_checks.md
|
docs: Recommend running PID_CALIBRATE in Config_checks.md
|
2018-03-18 12:43:41 -04:00 |
Contact.md
|
docs: Try to make the klippy.log bug reporting more clear
|
2018-01-21 13:08:31 -05:00 |
Debugging.md
|
docs: Update Debugging.md with information on logextract
|
2018-01-11 13:48:40 -05:00 |
FAQ.md
|
docs: Add Patreon link to FAQ page
|
2018-03-31 13:55:41 -04:00 |
Features.md
|
docs: Reword performance paragraph in Features.md
|
2017-09-27 13:59:47 -04:00 |
G-Codes.md
|
extruder: Add SET_PRESSURE_ADVANCE command.
|
2018-04-03 00:00:41 -04:00 |
Installation.md
|
docs: Update installation document with pointers to FAQ
|
2018-01-04 13:29:17 -05:00 |
Kinematics.md
|
toolhead: Permit look-ahead between Z moves
|
2017-09-03 15:46:48 -04:00 |
MCU_Commands.md
|
gpiocmds: Allow the start value for a pin to differ from the default_value
|
2017-10-12 11:59:27 -04:00 |
Overview.md
|
docs: Add a G-Codes.md file with the list of available commands
|
2018-03-08 14:11:20 -05:00 |
Pressure_Advance.md
|
docs: Note pressure_advance over 0.20 is unlikely to improve quality
|
2018-01-08 11:07:26 -05:00 |
Protocol.md
|
docs: Use only single space at start of new sentence
|
2017-05-01 11:58:32 -04:00 |
README.md
|
docs: Improve documentation for those starting in docs/
|
2017-04-27 16:05:26 -04:00 |
Releases.md
|
docs: Update release notes for v0.6.0 release
|
2018-03-31 14:04:39 -04:00 |
Todo.md
|
verify_heater: Add initial support for verifying heaters and sensors
|
2018-03-11 00:49:11 -05:00 |
beaglebone.md
|
docs: Note the use of the virtual_sdcard feature
|
2018-03-02 11:28:01 -05:00 |
developer-certificate-of-origin
|
docs: Add a CONTRIBUTING document
|
2017-12-24 12:33:01 -05:00 |
issue_template.md
|
docs: Add github issue template
|
2018-01-31 14:30:05 -05:00 |