Janar Sööt b9cccc5959 menu: support for click button long press ... - long press with timer (button release is not needed anymore) - initial support for edit mode long press gcode Signed-off-by: Janar Sööt <janar.soot@gmail.com>		2019-01-07 21:38:45 -05:00
..
chelper	winch: Add experimental support for cable winch kinematics	2018-12-24 11:38:59 -05:00
extras	menu: support for click button long press	2019-01-07 21:38:45 -05:00
kinematics	heater: take a gcode_id when setting up a heater (#1028)	2019-01-02 17:44:02 -05:00
clocksync.py	…
configfile.py	configfile: Strip trailing comments	2018-10-16 11:45:20 -04:00
console.py	console: Try to improve the description of the SUPPRESS command	2018-11-16 17:16:14 -05:00
gcode.py	respond: An extra for sending messages to the printer host. (#1053)	2019-01-02 17:45:35 -05:00
heater.py	heater: take a gcode_id when setting up a heater (#1028)	2019-01-02 17:44:02 -05:00
homing.py	endstop_phase: Move endstop phase homing code to new "extras" module	2018-10-16 13:09:23 -04:00
klippy.py	klippy: No need to return anything from _connect() method	2018-10-18 15:58:52 -04:00
mathutil.py	…
mcu.py	mcu: Allow set_stepper_kinematics() to set the kinematics back to None	2018-12-24 11:42:13 -05:00
msgproto.py	…
parsedump.py	…
pins.py	sam3: Add support for sam4s8c chips	2019-01-07 19:34:31 -05:00
queuelogger.py	…
reactor.py	reactor: support for delayed callbacks	2019-01-07 21:38:36 -05:00
serialhdl.py	…
stepper.py	endstop_phase: Move endstop phase homing code to new "extras" module	2018-10-16 13:09:23 -04:00
toolhead.py	toolhead: Do not apply main printer accel/velocity to extrude only moves	2019-01-04 12:47:45 -05:00
util.py	util: Fix versioning when gitdir is absent (#809)	2018-10-27 10:44:38 -04:00