75 lines
3.2 KiB
Markdown
75 lines
3.2 KiB
Markdown
Welcome to the Klipper documentation. If new to Klipper, start with
|
|
the [features](Features.md) and [installation](Installation.md)
|
|
documents.
|
|
|
|
# Overview information
|
|
|
|
- [Features](Features.md): A high-level list of features in Klipper.
|
|
- [FAQ](FAQ.md): Frequently asked questions.
|
|
- [Releases](Releases.md): The history of Klipper releases.
|
|
- [Config changes](Config_Changes.md): Recent software changes that
|
|
may require users to update their printer config file.
|
|
- [Contact](Contact.md): Information on bug reporting and general
|
|
communication with the Klipper developers.
|
|
|
|
# Configuration and Tuning Guides
|
|
|
|
- [Installation](Installation.md): Guide to installing Klipper.
|
|
- [config/example.cfg](https://github.com/KevinOConnor/klipper/tree/master/config/example.cfg)
|
|
a reference for the config file.
|
|
- [Config checks](Config_checks.md): Verify basic pin settings in the
|
|
config file.
|
|
- [Bed level](Bed_Level.md): Information on "bed leveling" in Klipper.
|
|
- [Delta calibrate](Delta_Calibrate.md): Calibration of delta
|
|
kinematics.
|
|
- [Probe calibrate](Probe_Calibrate.md): Calibration of automatic Z
|
|
probes.
|
|
- [BL-Touch](BLTouch.md): Configure a "BL-Touch" Z probe.
|
|
- [Manual level](Manual_Level.md): Calibration of Z endstops (and
|
|
similar).
|
|
- [Endstop phase](Endstop_Phase.md): Stepper assisted Z endstop
|
|
positioning.
|
|
- [Pressure advance](Pressure_Advance.md): Calibrate extruder
|
|
pressure.
|
|
- [Slicers](Slicers.md): Configure "slicer" software for Klipper.
|
|
- [Command Templates](Command_Templates.md): G-Code macros and
|
|
conditional evaluation.
|
|
- [Sensorless homing](Sensorless_Homing.md): Configuring tmc2130
|
|
sensorless homing.
|
|
- [Skew correction](skew_correction.md): Adjustments for axes not
|
|
perfectly square.
|
|
- [Resonance compensation](Resonance_Compensation.md): Reduce ringing in prints
|
|
by measuring printer resonances and configuring the input shaping.
|
|
- [G-Codes](G-Codes.md): Information on commands supported by Klipper.
|
|
|
|
# Developer Documentation
|
|
|
|
- [Code overview](Code_Overview.md): Developers should read this
|
|
first.
|
|
- [Kinematics](Kinematics.md): Technical details on how Klipper
|
|
implements motion.
|
|
- [Protocol](Protocol.md): Information on the low-level messaging
|
|
protocol between host and micro-controller.
|
|
- [MCU commands](MCU_Commands.md): A description of low-level commands
|
|
implemented in the micro-controller software.
|
|
- [Debugging](Debugging.md): Information on how to test and debug
|
|
Klipper.
|
|
- [Benchmarks](Benchmarks.md): Information on the Klipper benchmark
|
|
method.
|
|
- [Contributing](CONTRIBUTING.md): Information on how to submit
|
|
improvements to Klipper.
|
|
- [Packaging](Packaging.md): Information on building OS packages.
|
|
|
|
# Device Specific Documents
|
|
|
|
- [Raspberry Pi as Micro-controller](RPi_microcontroller.md): Details
|
|
for controlling devices wired to the GPIO pins of a Raspberry Pi.
|
|
- [Beaglebone](beaglebone.md): Details for running Klipper on the
|
|
Beaglebone PRU.
|
|
- [Bootloaders](Bootloaders.md): Developer information on
|
|
micro-controller flashing.
|
|
- [stm32f0](stm32f0_CAN.md): Information on the STM32F0 micro-controller
|
|
port.
|
|
- [TSL1401CL filament width sensor](TSL1401CL_Filament_Width_Sensor.md)
|
|
- [Hall filament width sensor](HallFilamentWidthSensor.md)
|