287 lines
11 KiB
Python
287 lines
11 KiB
Python
# Printer heater support
|
|
#
|
|
# Copyright (C) 2016 Kevin O'Connor <kevin@koconnor.net>
|
|
#
|
|
# This file may be distributed under the terms of the GNU GPLv3 license.
|
|
import math, logging, threading
|
|
|
|
# Mapping from name to Steinhart-Hart coefficients
|
|
Thermistors = {
|
|
"EPCOS 100K B57560G104F": (
|
|
0.000722136308968056, 0.000216766566488498, 8.92935804531095e-08),
|
|
"ATC Semitec 104GT-2": (
|
|
0.000809651054275124, 0.000211636030735685, 7.07420883993973e-08),
|
|
}
|
|
|
|
SAMPLE_TIME = 0.001
|
|
SAMPLE_COUNT = 8
|
|
REPORT_TIME = 0.300
|
|
KELVIN_TO_CELCIUS = -273.15
|
|
MAX_HEAT_TIME = 5.0
|
|
AMBIENT_TEMP = 25.
|
|
PWM_MAX = 255
|
|
|
|
class PrinterHeater:
|
|
def __init__(self, printer, config):
|
|
self.printer = printer
|
|
self.config = config
|
|
self.mcu_pwm = self.mcu_adc = None
|
|
self.thermistor_c = Thermistors.get(config.get('thermistor_type'))
|
|
self.pullup_r = config.getfloat('pullup_resistor', 4700.)
|
|
self.min_extrude_temp = config.getfloat('min_extrude_temp', 170.)
|
|
self.can_extrude = False
|
|
self.lock = threading.Lock()
|
|
self.last_temp = 0.
|
|
self.last_temp_time = 0.
|
|
self.target_temp = 0.
|
|
self.control = None
|
|
# pwm caching
|
|
self.next_pwm_time = 0.
|
|
self.last_pwm_value = 0
|
|
def build_config(self):
|
|
heater_pin = self.config.get('heater_pin')
|
|
thermistor_pin = self.config.get('thermistor_pin')
|
|
self.mcu_pwm = self.printer.mcu.create_pwm(heater_pin, 0, MAX_HEAT_TIME)
|
|
self.mcu_adc = self.printer.mcu.create_adc(thermistor_pin)
|
|
min_adc = self.calc_adc(self.config.getfloat('max_temp'))
|
|
max_adc = self.calc_adc(self.config.getfloat('min_temp'))
|
|
self.mcu_adc.set_minmax(
|
|
SAMPLE_TIME, SAMPLE_COUNT, minval=min_adc, maxval=max_adc)
|
|
self.mcu_adc.set_adc_callback(self.adc_callback)
|
|
control_algo = self.config.get('control', 'watermark')
|
|
algos = {'watermark': ControlBangBang, 'pid': ControlPID}
|
|
self.control = algos[control_algo](self, self.config)
|
|
if self.printer.mcu.output_file_mode:
|
|
self.can_extrude = True
|
|
def run(self):
|
|
self.mcu_adc.query_analog_in(REPORT_TIME)
|
|
def set_pwm(self, read_time, value):
|
|
if value:
|
|
if self.target_temp <= 0.:
|
|
return
|
|
if (read_time < self.next_pwm_time
|
|
and abs(value - self.last_pwm_value) < 15):
|
|
return
|
|
elif not self.last_pwm_value:
|
|
return
|
|
pwm_time = read_time + REPORT_TIME + SAMPLE_TIME*SAMPLE_COUNT
|
|
self.next_pwm_time = pwm_time + 0.75 * MAX_HEAT_TIME
|
|
self.last_pwm_value = value
|
|
logging.debug("pwm=%d@%.3f (%.3f)" % (value, read_time, pwm_time))
|
|
self.mcu_pwm.set_pwm(pwm_time, value)
|
|
# Temperature calculation
|
|
def calc_temp(self, adc):
|
|
r = self.pullup_r * adc / (1.0 - adc)
|
|
ln_r = math.log(r)
|
|
c1, c2, c3 = self.thermistor_c
|
|
temp_inv = c1 + c2*ln_r + c3*math.pow(ln_r, 3)
|
|
return 1.0/temp_inv + KELVIN_TO_CELCIUS
|
|
def calc_adc(self, temp):
|
|
if temp is None:
|
|
return None
|
|
c1, c2, c3 = self.thermistor_c
|
|
temp -= KELVIN_TO_CELCIUS
|
|
temp_inv = 1./temp
|
|
y = (c1 - temp_inv) / (2*c3)
|
|
x = math.sqrt(math.pow(c2 / (3.*c3), 3.) + math.pow(y, 2.))
|
|
r = math.exp(math.pow(x-y, 1./3.) - math.pow(x+y, 1./3.))
|
|
return r / (self.pullup_r + r)
|
|
def adc_callback(self, read_time, read_value):
|
|
temp = self.calc_temp(read_value)
|
|
with self.lock:
|
|
self.last_temp = temp
|
|
self.last_temp_time = read_time
|
|
self.can_extrude = (self.last_temp >= self.min_extrude_temp
|
|
and self.target_temp >= self.min_extrude_temp)
|
|
self.control.adc_callback(read_time, temp)
|
|
#logging.debug("temp: %.3f %f = %f" % (read_time, read_value, temp))
|
|
# External commands
|
|
def set_temp(self, print_time, degrees):
|
|
with self.lock:
|
|
self.target_temp = degrees
|
|
if self.target_temp < self.min_extrude_temp:
|
|
self.can_extrude = False
|
|
def get_temp(self):
|
|
with self.lock:
|
|
return self.last_temp, self.target_temp
|
|
def check_busy(self, eventtime):
|
|
with self.lock:
|
|
return self.control.check_busy(eventtime)
|
|
def start_auto_tune(self, temp):
|
|
with self.lock:
|
|
self.control = ControlAutoTune(self, self.control, temp)
|
|
|
|
|
|
######################################################################
|
|
# Bang-bang control algo
|
|
######################################################################
|
|
|
|
class ControlBangBang:
|
|
def __init__(self, heater, config):
|
|
self.heater = heater
|
|
self.max_delta = config.getfloat('max_delta', 2.0)
|
|
self.heating = False
|
|
def adc_callback(self, read_time, temp):
|
|
if self.heating and temp >= self.heater.target_temp+self.max_delta:
|
|
self.heating = False
|
|
elif not self.heating and temp <= self.heater.target_temp-self.max_delta:
|
|
self.heating = True
|
|
if self.heating:
|
|
self.heater.set_pwm(read_time, PWM_MAX)
|
|
else:
|
|
self.heater.set_pwm(read_time, 0)
|
|
def check_busy(self, eventtime):
|
|
return self.heater.last_temp < self.heater.target_temp-self.max_delta
|
|
|
|
|
|
######################################################################
|
|
# Proportional Integral Derivative (PID) control algo
|
|
######################################################################
|
|
|
|
class ControlPID:
|
|
def __init__(self, heater, config):
|
|
self.heater = heater
|
|
self.Kp = config.getfloat('pid_Kp')
|
|
self.Ki = config.getfloat('pid_Ki')
|
|
self.Kd = config.getfloat('pid_Kd')
|
|
self.min_deriv_time = config.getfloat('pid_deriv_time', 2.)
|
|
imax = config.getint('pid_integral_max', PWM_MAX)
|
|
self.temp_integ_max = imax / self.Ki
|
|
self.prev_temp = AMBIENT_TEMP
|
|
self.prev_temp_time = 0.
|
|
self.prev_temp_deriv = 0.
|
|
self.prev_temp_integ = 0.
|
|
def adc_callback(self, read_time, temp):
|
|
time_diff = read_time - self.prev_temp_time
|
|
# Calculate change of temperature
|
|
temp_diff = temp - self.prev_temp
|
|
if time_diff >= self.min_deriv_time:
|
|
temp_deriv = temp_diff / time_diff
|
|
else:
|
|
temp_deriv = (self.prev_temp_deriv * (self.min_deriv_time-time_diff)
|
|
+ temp_diff) / self.min_deriv_time
|
|
# Calculate accumulated temperature "error"
|
|
temp_err = self.heater.target_temp - temp
|
|
temp_integ = self.prev_temp_integ + temp_err * time_diff
|
|
temp_integ = max(0., min(self.temp_integ_max, temp_integ))
|
|
# Calculate output
|
|
co = int(self.Kp*temp_err + self.Ki*temp_integ - self.Kd*temp_deriv)
|
|
#logging.debug("pid: %f@%.3f -> diff=%f deriv=%f err=%f integ=%f co=%d" % (
|
|
# temp, read_time, temp_diff, temp_deriv, temp_err, temp_integ, co))
|
|
bounded_co = max(0, min(PWM_MAX, co))
|
|
self.heater.set_pwm(read_time, bounded_co)
|
|
# Store state for next measurement
|
|
self.prev_temp = temp
|
|
self.prev_temp_time = read_time
|
|
self.prev_temp_deriv = temp_deriv
|
|
if co == bounded_co:
|
|
self.prev_temp_integ = temp_integ
|
|
def check_busy(self, eventtime):
|
|
temp_diff = self.heater.target_temp - self.heater.last_temp
|
|
return abs(temp_diff) > 1. or abs(self.prev_temp_deriv) > 0.1
|
|
|
|
|
|
######################################################################
|
|
# Ziegler-Nichols PID autotuning
|
|
######################################################################
|
|
|
|
TUNE_PID_DELTA = 5.0
|
|
|
|
class ControlAutoTune:
|
|
def __init__(self, heater, old_control, target_temp):
|
|
self.heater = heater
|
|
self.old_control = old_control
|
|
self.target_temp = target_temp
|
|
self.heating = False
|
|
self.peaks = []
|
|
self.peak = 0.
|
|
self.peak_time = 0.
|
|
def adc_callback(self, read_time, temp):
|
|
if self.heating and temp >= self.target_temp:
|
|
self.heating = False
|
|
self.check_peaks()
|
|
elif not self.heating and temp <= self.target_temp - TUNE_PID_DELTA:
|
|
self.heating = True
|
|
self.check_peaks()
|
|
if self.heating:
|
|
self.heater.set_pwm(read_time, PWM_MAX)
|
|
if temp < self.peak:
|
|
self.peak = temp
|
|
self.peak_time = read_time
|
|
else:
|
|
self.heater.set_pwm(read_time, 0)
|
|
if temp > self.peak:
|
|
self.peak = temp
|
|
self.peak_time = read_time
|
|
def check_peaks(self):
|
|
self.peaks.append((self.peak, self.peak_time))
|
|
if self.heating:
|
|
self.peak = 9999999.
|
|
else:
|
|
self.peak = -9999999.
|
|
if len(self.peaks) < 4:
|
|
return
|
|
temp_diff = self.peaks[-1][0] - self.peaks[-2][0]
|
|
time_diff = self.peaks[-1][1] - self.peaks[-3][1]
|
|
pwm_diff = PWM_MAX - 0
|
|
Ku = 4. * (2. * pwm_diff) / (abs(temp_diff) * math.pi)
|
|
Tu = time_diff
|
|
|
|
Kp = 0.6 * Ku
|
|
Ti = 0.5 * Tu
|
|
Td = 0.125 * Tu
|
|
Ki = Kp / Ti
|
|
Kd = Kp * Td
|
|
logging.info("Autotune: raw=%f/%d Ku=%f Tu=%f Kp=%f Ki=%f Kd=%f" % (
|
|
temp_diff, pwm_diff, Ku, Tu, Kp, Ki, Kd))
|
|
def check_busy(self, eventtime):
|
|
if self.heating or len(self.peaks) < 12:
|
|
return True
|
|
self.heater.control = self.old_control
|
|
return False
|
|
|
|
|
|
######################################################################
|
|
# Tuning information test
|
|
######################################################################
|
|
|
|
class ControlBumpTest:
|
|
def __init__(self, heater, old_control, target_temp):
|
|
self.heater = heater
|
|
self.old_control = old_control
|
|
self.target_temp = target_temp
|
|
self.temp_samples = {}
|
|
self.pwm_samples = {}
|
|
self.state = 0
|
|
def set_pwm(self, read_time, value):
|
|
self.pwm_samples[read_time + 2*REPORT_TIME] = value
|
|
self.heater.set_pwm(read_time, value)
|
|
def adc_callback(self, read_time, temp):
|
|
self.temp_samples[read_time] = temp
|
|
if not self.state:
|
|
self.set_pwm(read_time, 0)
|
|
if len(self.temp_samples) >= 20:
|
|
self.state += 1
|
|
elif self.state == 1:
|
|
if temp < self.target_temp:
|
|
self.set_pwm(read_time, PWM_MAX)
|
|
return
|
|
self.set_pwm(read_time, 0)
|
|
self.state += 1
|
|
elif self.state == 2:
|
|
self.set_pwm(read_time, 0)
|
|
if temp <= (self.target_temp + AMBIENT_TEMP) / 2.:
|
|
self.dump_stats()
|
|
self.state += 1
|
|
def dump_stats(self):
|
|
out = ["%.3f %.1f %d" % (time, temp, self.pwm_samples.get(time, -1.))
|
|
for time, temp in sorted(self.temp_samples.items())]
|
|
f = open("/tmp/heattest.txt", "wb")
|
|
f.write('\n'.join(out))
|
|
f.close()
|
|
def check_busy(self, eventtime):
|
|
if self.state < 3:
|
|
return True
|
|
self.heater.control = self.old_control
|
|
return False
|