3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
klipper/docs
History
Kevin O'Connor 8e87ab0939 gcode: Remove support for "G4 S1" style commands 
The S parameter is not a standard and was not commonly used.  The P
parameter (delay specified in milliseconds) is the commonly accepted
g-code mechanism for dwelling.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 		2019-12-02 19:31:20 -05:00
..
_layouts docs: Fix markdown table layout in html rendering 2019-04-18 22:56:56 -04:00
img docs: Update Pressure_Advance.md to use tuning tower 2019-10-23 19:28:03 -04:00
prints docs: Minor cleanup to square_tower.scad 2019-10-27 12:16:17 -04:00
BLTouch.md docs: Recommend safe_z_home over homing_override 2019-11-07 16:50:52 -05:00
Bed_Level.md docs: Minor wording change to Bed_Level.md 2019-05-23 19:31:44 -04:00
Benchmarks.md docs: Update SAMD51 benchmarks 2019-11-18 12:49:05 -05:00
Bootloaders.md docs: Update example openocd config in Bootloaders.md 2019-10-23 19:05:04 -04:00
CNAME docs: Fixup github pages 2019-04-14 22:41:23 -04:00
CONTRIBUTING.md
…
Code_Overview.md stepper: Add get/set_tag_position() and convert calc_position() 2019-11-13 19:00:17 -05:00
Command_Templates.md toolhead: Report which axes are homed via get_status() 2019-11-24 20:21:13 -05:00
Config_Changes.md gcode: Remove support for "G4 S1" style commands 2019-12-02 19:31:20 -05:00
Config_checks.md docs: Add Bed_Level.md and Probe_Calibrate.md documents 2019-02-12 13:20:32 -05:00
Contact.md
…
Debugging.md config: Rename avrsim.cfg to generic-simulavr.cfg 2019-11-24 20:21:13 -05:00
Delta_Calibrate.md docs: Update Delta_Calibrate.md with probe location bias info 2019-06-06 10:08:58 -04:00
Endstop_Phase.md docs: Minor rewording in Endstop_Phase.md 2018-11-14 09:46:21 -05:00
FAQ.md docs: Recommend safe_z_home over homing_override 2019-11-07 16:50:52 -05:00
Features.md docs: Update SAMD51 benchmarks 2019-11-18 12:49:05 -05:00
G-Codes.md extruder: Initial support for "smoothed pressure advance" 2019-11-21 13:18:19 -05:00
Installation.md docs: Recommend OctoPrint v1.3.12 in Installation.md 2019-10-30 11:02:03 -04:00
Kinematics.md docs: Kinematics.md updates for extruder instantaneous corner velocity 2019-11-22 17:04:14 -05:00
MCU_Commands.md docs: Update MCU_Commands with schedule_soft_pwm_out changes 2019-08-01 00:23:09 -04:00
Manual_Level.md docs: Minor wording changes to Manual_level.md 2019-10-16 16:48:50 -04:00
Overview.md docs: Remove outdated stm32f1.md document 2019-10-23 18:53:11 -04:00
Packaging.md
…
Pressure_Advance.md docs: Minor wording change in Pressure_Advance.md 2019-11-25 11:48:41 -05:00
Probe_Calibrate.md probe: Add range to probe accuracy results (#2015) 2019-09-29 16:56:46 -04:00
Protocol.md docs: Update Protocol.md to use enumerations for pins 2019-07-09 14:17:28 -04:00
README.md
…
Releases.md docs: Update release notes for v0.8.0 release 2019-10-21 22:30:04 -04:00
Sensorless_Homing.md docs: Update Sensorless_Homing.md with new TMCs (#1958) 2019-10-03 17:56:40 -04:00
Slicers.md docs: Warn against using "PreloadVE" on KISSlicer 2019-06-23 12:18:24 -04:00
TSL1401CL_Filament_Width_Sensor.md tsl1401cl_filament_width_sensor: Filament Width Sensor Support (#1132) 2019-02-14 10:13:48 -05:00
_config.yml docs: Fix inclusion of CONTRIBUTING.md in the automatic html generation 2019-04-18 23:10:32 -04:00
beaglebone.md docs: Avoid using .. in markdown links 2019-04-14 21:12:21 -04:00
developer-certificate-of-origin
…
issue_template.md
…
skew_correction.md docs: Update for latest changs to skew_correction 2019-06-29 10:58:46 -04:00
stm32f0_CAN.md stm32f0: Various fixes according to comment: (#1453) 2019-03-28 10:21:51 -04:00

README.md

Welcome to the Klipper documentation. The overview document is a good starting point.