klipper

History

Kevin O'Connor 33887b8c39 probe: Support manual probing at runtime Don't require the config file to specify manual probing. Instead, allow the user to select manual probing on each ProbePointsHelper invocation. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>		2018-10-01 11:12:30 -04:00
..
img	docs: Add Delta_Calibrate.md guide with "enhanced delta calibration"	2018-09-25 13:48:46 -04:00
prints	delta_calibrate: Initial support for enhanced delta calibration	2018-09-25 13:48:46 -04:00
Bootloaders.md	docs: Update Bootloaders.md with AVR lfuse hints	2018-08-27 12:34:37 -04:00
CONTRIBUTING.md	…
Code_Overview.md	docs: Add a section with micro-controller porting tips to Code_Overview.md	2018-07-11 14:40:39 -04:00
Config_checks.md	pid_calibrate: Support saving calibration data via SAVE_CONFIG	2018-09-25 13:48:46 -04:00
Contact.md	docs: Expand on why it is important to provide the log in Contact.md	2018-07-08 20:30:35 -04:00
Debugging.md	docs: Update sam4e8e docs and benchmarks (#562 )	2018-08-22 19:17:43 -04:00
Delta_Calibrate.md	probe: Support manual probing at runtime	2018-10-01 11:12:30 -04:00
FAQ.md	docs: Minor rewording of Marlin pin number section of FAQ	2018-08-26 23:06:32 -04:00
Features.md	docs: Add Delta_Calibrate.md guide with "enhanced delta calibration"	2018-09-25 13:48:46 -04:00
G-Codes.md	probe: Support manual probing at runtime	2018-10-01 11:12:30 -04:00
Installation.md	gcode: Send proactive state messages	2018-09-12 21:31:27 -04:00
Kinematics.md	docs: Minor change to wording of junction speeds	2018-08-03 15:48:07 -04:00
MCU_Commands.md	…
Overview.md	docs: Add Delta_Calibrate.md guide with "enhanced delta calibration"	2018-09-25 13:48:46 -04:00
Pressure_Advance.md	docs: Update Pressure_Advance.md document	2018-09-11 12:00:43 -04:00
Protocol.md	…
README.md	…
Releases.md	…
beaglebone.md	…
developer-certificate-of-origin	…
issue_template.md	…
stm32f1.md	…

README.md

Welcome to the Klipper documentation. The overview document is a good starting point.