klipper

Клиппер

Go to file

Kevin O'Connor a44bc950a3 stm32: Move irq handler code above irq setup Only code movement. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>		2019-08-22 09:58:58 -04:00
config	config: Update bigtreetech skr boards to define EXP1/EXP2 plugs	2019-08-19 21:40:20 -04:00
docs	docs: Sort transfer rate benchmark by rate	2019-08-17 13:55:21 -04:00
klippy	console: Update for PinResolver changes	2019-08-19 23:52:02 -04:00
lib	lib: Remove unused stm32f1 "hal" code	2019-08-05 11:25:40 -04:00
scripts	armcm_boot: Add generic code for early board init on armcm machines	2019-08-22 09:58:58 -04:00
src	stm32: Move irq handler code above irq setup	2019-08-22 09:58:58 -04:00
test	tmc2209: Add support for sensorless homing	2019-08-19 12:05:09 -04:00
.gitignore	util: Fix versioning when gitdir is absent (#809 )	2018-10-27 10:44:38 -04:00
.travis.yml	test: Update .travis.yml to list apt packages one per line	2018-08-17 09:47:57 -04:00
COPYING	Initial commit of source code.	2016-05-25 11:37:40 -04:00
Makefile	Makefile: Add generic rule for precompiling linker scripts	2019-08-21 12:31:12 -04:00
README.md	docs: Update main README file to point to website	2019-04-20 13:43:35 -04:00

README.md

Welcome to the Klipper project!

https://www.klipper3d.org/

Klipper is a 3d-Printer firmware. It combines the power of a general purpose computer with one or more micro-controllers. See the features document for more information on why you should use Klipper.

To begin using Klipper start by installing it.

Klipper is Free Software. See the license or read the documentation.