3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
klipper/docs
History
Alec B. Plumb 59e9b6562f respond: An extra for sending messages to the printer host. (#1053) 
I have made one change to `gcode.py` to support quoted parameter
values.

I have added support for the basic `M118` command (see
https://reprap.org/wiki/G-code#M118:_Echo_message_on_host). I have
also added a `RESPOND` command that takes extended parameters.
`ECHO` might be a better name than `RESPOND` but is already defined
in `gcode.py`.

Signed-off-by: Alec B. Plumb <alec@etherwalker.com>
 		2019-01-02 17:45:35 -05:00
..
img docs: Add Delta_Calibrate.md guide with "enhanced delta calibration" 2018-09-25 13:48:46 -04:00
prints delta_calibrate: Initial support for enhanced delta calibration 2018-09-25 13:48:46 -04:00
Bootloaders.md samd21: Add support for flashing an application via the bossac tool 2018-11-30 22:22:42 -05:00
CONTRIBUTING.md docs: Add a CONTRIBUTING document 2017-12-24 12:33:01 -05:00
Code_Overview.md docs: Minor update to Code_Overview.md with further kinematics info 2018-11-17 14:56:46 -05:00
Config_checks.md docs: Add a Slicers.md document 2018-10-28 10:47:32 -04:00
Contact.md docs: Expand on why it is important to provide the log in Contact.md 2018-07-08 20:30:35 -04:00
Debugging.md docs: Fix typo in command dispatch benchmarks 2018-11-16 20:38:30 -05:00
Delta_Calibrate.md delta_calibrate: Do not automatically run G28 on DELTA_CALIBRATE 2018-10-22 11:26:01 -04:00
Endstop_Phase.md docs: Minor rewording in Endstop_Phase.md 2018-11-14 09:46:21 -05:00
FAQ.md docs: Add a FAQ item on how to cancel a "wait for temperature" request 2018-12-20 16:25:58 -05:00
Features.md docs: Update benchmarks 2018-11-16 18:59:55 -05:00
G-Codes.md respond: An extra for sending messages to the printer host. (#1053) 2019-01-02 17:45:35 -05:00
Installation.md docs: Be more clear that a baud of 250000 is recommended 2018-11-13 14:06:27 -05:00
Kinematics.md docs: Minor change to wording of junction speeds 2018-08-03 15:48:07 -04:00
MCU_Commands.md basecmd: Rename get_status to get_clock 2018-05-29 10:57:29 -04:00
Overview.md docs: Add a Slicers.md document 2018-10-28 10:47:32 -04:00
Packaging.md util: Fix versioning when gitdir is absent (#809) 2018-10-27 10:44:38 -04:00
Pressure_Advance.md docs: Update pressure advance doc to note it only impacts the extruder 2018-10-25 19:09:47 -04:00
Protocol.md docs: Replace get_status example with get_clock in Protocol.md 2018-10-20 11:53:32 -04:00
README.md docs: Improve documentation for those starting in docs/ 2017-04-27 16:05:26 -04:00
Releases.md docs: Update release notes for v0.7.0 release 2018-12-20 09:15:24 -05:00
Slicers.md docs: Add a Slicers.md document 2018-10-28 10:47:32 -04:00
beaglebone.md pru: Disable ADC reading directly from the PRU 2018-06-27 12:10:25 -04:00
developer-certificate-of-origin docs: Add a CONTRIBUTING document 2017-12-24 12:33:01 -05:00
issue_template.md docs: Add github issue template 2018-01-31 14:30:05 -05:00
stm32f1.md docs: Update stm32f1.md - usb is now supported. 2018-10-22 13:22:58 -04:00

README.md

Welcome to the Klipper documentation. The overview document is a good starting point.