..
avr
atmega1284p: Add choice between UART0 or UART1 to Kconfig
2018-07-13 19:58:04 -04:00
generic
armcm_irq: Enhance clear_active_irq() so it works on cortex-m0
2018-08-06 23:36:05 -04:00
linux
linux: Add support for bi-directional SPI communication
2018-07-24 11:16:05 -04:00
lpc176x
usb_cdc: Allow USB endpoint ids to be board specific
2018-08-06 23:36:05 -04:00
pru
pru: Disable ADC reading directly from the PRU
2018-06-27 12:10:25 -04:00
sam3x8e
sam3x8e: Use SAM3X CMSIS files instead of arduino CMSIS files
2018-08-06 23:36:05 -04:00
sam4e8e
sam4e8e: Fix bug in sam4e gpio.c ( #563 )
2018-08-24 13:17:53 -04:00
samd21
samd21: Fix description of bootloader offset
2018-08-08 19:56:43 -04:00
simulator
simulator: Rework dummy simulator code to user timer_irq / serial_irq
2018-07-11 14:35:24 -04:00
stm32f1
stm32f1: implement spi_prepare
2018-07-08 09:25:11 -04:00
Kconfig
sam4e8e: Add the SAM4e8e port
2018-08-08 10:44:49 -04:00
Makefile
thermocouple: Add initial support for common SPI temperature sensing chips
2018-07-24 11:16:05 -04:00
adccmds.c
adccmds: Add support for min/max temperature check filtering
2018-07-02 13:56:34 -04:00
basecmd.c
basecmd: Rename get_status to get_clock
2018-05-29 10:57:29 -04:00
basecmd.h
pru: Support config_reset command to manually reset mcu
2017-09-03 23:16:38 -04:00
buttons.c
buttons: Add initial support for detecting button presses
2018-06-30 14:28:51 -04:00
byteorder.h
byteorder: Add a header file defining common byteswap functions
2018-05-21 09:44:40 -04:00
command.c
command: Wait to send ack until after processing commands
2018-05-28 10:43:40 -04:00
command.h
command: Wait to send ack until after processing commands
2018-05-28 10:43:40 -04:00
compiler.h
compiler.h: Check if __aligned and __section macros are already defined
2016-06-13 23:18:59 -04:00
ctr.h
build: Avoid linker magic in compile_time_request.c unique id generation
2017-05-26 12:32:02 -04:00
debugcmds.c
debugcmds: Move debugging commands from basecmd.c to new file
2017-05-15 14:02:59 -04:00
endstop.c
endstop: Eliminate end_stop_set_oversample command
2017-10-12 11:59:27 -04:00
gpiocmds.c
gpiocmds: Add update_digital_out command
2018-06-27 12:10:39 -04:00
lcd_hd44780.c
lcd_hd44780: Add micro-controller code for the HD44780 LCD chip
2018-03-06 11:30:34 -05:00
lcd_st7920.c
lcd_st7920: Use a longer delay at the start of each command/data
2018-06-22 23:47:09 -04:00
pwmcmds.c
gpiocmds: Allow the start value for a pin to differ from the default_value
2017-10-12 11:59:27 -04:00
sched.c
sched: Interrupts must be disabled during setjmp() call
2017-12-21 12:54:33 -05:00
sched.h
pru: Support config_reset command to manually reset mcu
2017-09-03 23:16:38 -04:00
spicmds.c
thermocouple: Add initial support for common SPI temperature sensing chips
2018-07-24 11:16:05 -04:00
spicmds.h
thermocouple: Add initial support for common SPI temperature sensing chips
2018-07-24 11:16:05 -04:00
stepper.c
stepper: Introduce and use gpio_out_toggle_noirq()
2018-05-15 17:09:11 -04:00
stepper.h
stepper: Introduce stepper_get_position command and remove from endstop.c
2017-03-09 14:54:52 -05:00
thermocouple.c
thermocouple: Minor fixes
2018-07-25 09:06:50 -04:00
b065f51454