Justin Schuh 93f1e6dd86 FAN: Kick start fan when the increase is more than 50% (#2085) ... Large increases in fan speed can suffer from acceleration lag, so this change kick starts the fan for a change of 50% or more in the same way that starting the fan from 0% does. Signed-off-by: Justin Schuh <code@justinschuh.com>		2019-11-24 18:37:30 -05:00
..
chelper	extruder: Initial support for "smoothed pressure advance"	2019-11-21 13:18:19 -05:00
extras	FAN: Kick start fan when the increase is more than 50% (#2085)	2019-11-24 18:37:30 -05:00
kinematics	extruder: Remove support for lookahead() method	2019-11-21 13:18:21 -05:00
clocksync.py	clocksync: Fix typo in pause() call at connect time	2019-10-31 11:36:35 -04:00
configfile.py	configfile: Fix the exception raised when an included file is missing (#1931)	2019-09-01 18:28:18 -04:00
console.py	console: Update for PinResolver changes	2019-08-19 23:52:02 -04:00
gcode.py	stepper: Add get/set_tag_position() and convert calc_position()	2019-11-13 19:00:17 -05:00
heater.py	extruder: Consistently use "extruder" for the primary extruder	2019-11-07 16:28:47 -05:00
homing.py	toolhead: Rename _full_flush() to flush_step_generation() and use globally	2019-11-21 13:17:45 -05:00
klippy.py	mcu: Contact and identify all the mcus prior to configuring them	2019-11-06 10:35:24 -05:00
mathutil.py	…
mcu.py	mcu: Minor simplification to default reset detection	2019-11-12 22:15:04 -05:00
msgproto.py	msgproto: unresolved symbol fixed	2019-11-15 11:36:54 -05:00
parsedump.py	…
pins.py	stepper: Move MCU_stepper from mcu.py to stepper.py	2019-11-12 17:32:18 -05:00
queuelogger.py	…
reactor.py	…
serialhdl.py	…
stepper.py	stepper: Remove set_commanded_position() call	2019-11-13 19:35:26 -05:00
toolhead.py	force_move: Make sure to flush step generation queue after each move	2019-11-24 11:55:30 -05:00
util.py	…