3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
klipper/docs
History
Kevin O'Connor 973ef97143 pid_calibrate: Move PID calibration logic from heater.py to new file 
Drop support for M303 and PID_TUNE, and replace it with a new
PID_CALIBRATE command.  Move the logic for this command from heater.py
to a new pid_calibrate.py file in the extras/ directory.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 		2018-03-18 12:02:30 -04:00
..
img docs: Try to make the klippy.log bug reporting more clear 2018-01-21 13:08:31 -05:00
prints docs: Minor update to square.scad 2018-01-02 21:56:29 -05:00
CONTRIBUTING.md docs: Add a CONTRIBUTING document 2017-12-24 12:33:01 -05:00
Code_Overview.md docs: Add tips for porting to new kinematics to Code_Overview.md 2018-02-17 13:48:53 -05:00
Config_checks.md docs: Update Config_checks.md 2018-02-07 22:24:32 -05:00
Contact.md docs: Try to make the klippy.log bug reporting more clear 2018-01-21 13:08:31 -05:00
Debugging.md docs: Update Debugging.md with information on logextract 2018-01-11 13:48:40 -05:00
FAQ.md docs: Add "will heaters be turned off on a crash" item to FAQ 2018-03-13 11:36:45 -04:00
Features.md
…
G-Codes.md pid_calibrate: Move PID calibration logic from heater.py to new file 2018-03-18 12:02:30 -04:00
Installation.md docs: Update installation document with pointers to FAQ 2018-01-04 13:29:17 -05:00
Kinematics.md
…
MCU_Commands.md
…
Overview.md docs: Add a G-Codes.md file with the list of available commands 2018-03-08 14:11:20 -05:00
Pressure_Advance.md docs: Note pressure_advance over 0.20 is unlikely to improve quality 2018-01-08 11:07:26 -05:00
Protocol.md
…
README.md
…
Releases.md
…
Todo.md verify_heater: Add initial support for verifying heaters and sensors 2018-03-11 00:49:11 -05:00
beaglebone.md docs: Note the use of the virtual_sdcard feature 2018-03-02 11:28:01 -05:00
developer-certificate-of-origin docs: Add a CONTRIBUTING document 2017-12-24 12:33:01 -05:00
issue_template.md docs: Add github issue template 2018-01-31 14:30:05 -05:00

README.md

Welcome to the Klipper documentation. The overview document is a good starting point.