klipper/klippy
Dmitry Butyugin 96ea871b35 adxl345: Apply correct scaling for X,Y and Z axes
According to ADXL345/ADXL343 datasheets, at 3.3V supply voltage,
which is most frequent in the various boards, the sensitivity of
X and Y axes changes to 265 LSB/g from 256 LSB/g at 2.5V.

Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
2022-10-25 14:41:00 -04:00
..
chelper kinematics: Add deltesian printers (#5743) 2022-09-01 15:56:31 -04:00
extras adxl345: Apply correct scaling for X,Y and Z axes 2022-10-25 14:41:00 -04:00
kinematics kinematics: Add deltesian printers (#5743) 2022-09-01 15:56:31 -04:00
clocksync.py msgblock: Add clock estimation helper functions 2021-06-09 18:58:35 -04:00
configfile.py configfile: Expose options awaiting to be saved (#5270) 2022-06-20 12:10:57 -04:00
console.py console: Add support for DUMP and FILEDUMP commands 2022-07-29 13:30:39 -04:00
gcode.py gcode: Handle M117 and M118 commands that start with a special character 2022-01-18 11:34:40 -05:00
klippy.py mcu: Delay reset signaling for usb to canbus bridge nodes 2022-07-29 11:40:54 -04:00
mathutil.py mathutil: Disable queuelogger in background_coordinate_descent() 2019-12-17 09:51:45 -05:00
mcu.py mcu: Delay reset signaling for usb to canbus bridge nodes 2022-07-29 11:40:54 -04:00
msgproto.py spi_flash: Make SD updates more tolerant of flaky boards 2021-07-20 18:05:05 -04:00
parsedump.py
pins.py pins: Improve pin description checks 2022-05-09 16:33:46 -04:00
queuelogger.py klippy: Add Python2 module wrappers and use Python3 module naming 2021-10-04 14:36:08 -04:00
reactor.py reactor: Add support for waiting on fds becoming writable 2022-07-06 09:54:44 -04:00
serialhdl.py serialqueue: Improve canbus timing 2022-07-29 11:40:54 -04:00
stepper.py extruder: Verify trapq is unmodified on default SET_PRESSURE_ADVANCE 2022-03-04 13:38:59 -05:00
toolhead.py toolhead: Capture current junction_deviation in a Move class 2022-10-17 11:08:56 -04:00
util.py util: Use regular str() type in get_git_version() on Python2 2021-10-31 13:52:31 -04:00
webhooks.py webhooks: Close clients that become unresponsive 2022-07-06 09:54:44 -04:00