132 lines
4.2 KiB
Markdown
132 lines
4.2 KiB
Markdown
The Klippy host code has some tools to help in debugging the firmware.
|
|
|
|
Translating gcode files to firmware commands
|
|
============================================
|
|
|
|
The Klippy host code can run in a batch mode to produce the low-level
|
|
firmware commands associated with a gcode file. Inspecting these
|
|
low-level firmware commands is useful when trying to understand the
|
|
actions of the low-level hardware. It can also be useful to compare
|
|
the difference in firmware commands after a code change.
|
|
|
|
To run Klippy in this batch mode, there is a one time step necessary
|
|
to generate the firmware "data dictionary". This is done by compiling
|
|
the firmware code to obtain the **out/klipper.dict** file:
|
|
|
|
```
|
|
make menuconfig
|
|
make
|
|
```
|
|
|
|
Once the above is done it is possible to run Klipper in batch mode
|
|
(see [installation](Installation.md) for the steps necessary to build
|
|
the python virtual environment and a printer.cfg file):
|
|
|
|
```
|
|
~/klippy-env/bin/python ./klippy/klippy.py ~/printer.cfg -i test.gcode -o test.serial -v -d out/klipper.dict
|
|
```
|
|
|
|
The above will produce a file **test.serial** with the binary serial
|
|
output. This output can be translated to readable text with:
|
|
|
|
```
|
|
~/klippy-env/bin/python ./klippy/parsedump.py out/klipper.dict test.serial > test.txt
|
|
```
|
|
|
|
The resulting file **test.txt** contains a human readable list of
|
|
firmware commands.
|
|
|
|
The batch mode disables certain response / request commands in order
|
|
to function. As a result, there will be some differences between
|
|
actual firmware commands and the above output. The generated data is
|
|
useful for testing and inspection; it is not useful for sending to a
|
|
real micro-controller.
|
|
|
|
Testing with simulavr
|
|
=====================
|
|
|
|
The [simulavr](http://www.nongnu.org/simulavr/) tool enables one to
|
|
simulate an Atmel ATmega micro-controller. This section describes how
|
|
one can run test gcode files through simulavr. It is recommended to
|
|
run this on a desktop class machine (not a Raspberry Pi) as it does
|
|
require significant cpu to run efficiently.
|
|
|
|
To use simulavr, download the simulavr package and compile with python
|
|
support:
|
|
|
|
```
|
|
git clone git://git.savannah.nongnu.org/simulavr.git
|
|
cd simulavr
|
|
./bootstrap
|
|
./configure --enable-python
|
|
make
|
|
```
|
|
|
|
Note that the build system may need to have some packages (such as
|
|
swig) installed in order to build the python module. Make sure the
|
|
file **src/python/_pysimulavr.so** is present after the above
|
|
compilation.
|
|
|
|
To compile Klipper for use in simulavr, run:
|
|
|
|
```
|
|
cd /patch/to/klipper
|
|
make menuconfig
|
|
```
|
|
|
|
and compile the firmware for an AVR atmega644p, disable the AVR
|
|
watchdog timer, and set the MCU frequency to 20000000. Then one can
|
|
compile Klipper (run `make`) and then start the simulation with:
|
|
|
|
```
|
|
PYTHONPATH=/path/to/simulavr/src/python/ ./scripts/avrsim.py -m atmega644 -s 20000000 -b 250000 out/klipper.elf
|
|
```
|
|
|
|
It may be necessary to create a python virtual environment to run
|
|
Klippy on the target machine. To do so, run:
|
|
|
|
```
|
|
virtualenv ~/klippy-env
|
|
~/klippy-env/bin/pip install cffi==1.6.0 pyserial==2.7
|
|
```
|
|
|
|
Then, with simulavr running in another window, one can run the
|
|
following to read gcode from a file (eg, "test.gcode"), process it
|
|
with Klippy, and send it to Klipper running in simulavr:
|
|
|
|
```
|
|
~/klippy-env/bin/python ./klippy/klippy.py config/avrsim.cfg -i test.gcode -v
|
|
```
|
|
|
|
Using simulavr with gtkwave
|
|
---------------------------
|
|
|
|
One useful feature of simulavr is its ability to create signal wave
|
|
generation files with the exact timing of events. To do this, follow
|
|
the directions above, but run avrsim.py with a command-line like the
|
|
following:
|
|
|
|
```
|
|
PYTHONPATH=/path/to/simulavr/src/python/ ./scripts/avrsim.py -m atmega644 -s 20000000 -b 250000 out/klipper.elf -t PORTA.PORT,PORTC.PORT
|
|
```
|
|
|
|
The above would create a file **avrsim.vcd** with information on each
|
|
change to the GPIOs on PORTA and PORTB. This could then be viewed
|
|
using gtkwave with:
|
|
|
|
```
|
|
gtkwave avrsim.vcd
|
|
```
|
|
|
|
Manually sending commands to the micro-controller
|
|
-------------------------------------------------
|
|
|
|
Normally, Klippy would be used to translate gcode commands to Klipper
|
|
commands. However, it's also possible to manually send Klipper
|
|
commands (functions marked with the DECL_COMMAND() macro in the
|
|
Klipper source code). To do so, run:
|
|
|
|
```
|
|
~/klippy-env/bin/python ./klippy/console.py /tmp/pseudoserial 250000
|
|
```
|