..
chelper
chelper: Add a quick __main__ to compile c helper ( #782 )
2018-10-16 12:21:18 -04:00
extras
Add DUMP_TMC capabilities to the TMC2660 extra
2018-10-28 18:45:49 -04:00
kinematics
delta: Make sure to clear limit_xy2 after a homing move
2018-10-27 11:54:17 -04:00
clocksync.py
clocksync: Simplify is_active() check
2018-05-31 18:20:30 -04:00
configfile.py
configfile: Strip trailing comments
2018-10-16 11:45:20 -04:00
console.py
console: Use reactor register_callback() mechanism
2018-09-02 12:31:36 -04:00
gcode.py
gcode: process_batch() should execute commands atomically
2018-10-28 18:39:45 -04:00
heater.py
heater: Add new TURN_OFF_HEATERS command
2018-09-18 16:01:07 -04:00
homing.py
endstop_phase: Move endstop phase homing code to new "extras" module
2018-10-16 13:09:23 -04:00
klippy.py
klippy: No need to return anything from _connect() method
2018-10-18 15:58:52 -04:00
mathutil.py
delta_calibrate: Perform coordinate descent in a background process
2018-10-15 19:01:19 -04:00
mcu.py
mcu: Add a set_commanded_position() method to MCU_stepper
2018-10-10 14:30:09 -04:00
msgproto.py
msgproto: Add support for a get_constant_int() method
2018-05-28 10:43:40 -04:00
parsedump.py
build: Request python2 for all directly executed python binaries
2017-06-27 20:26:02 -04:00
pins.py
avr: Add support for atmega328p
2018-10-29 11:55:15 -04:00
queuelogger.py
klippy: Automatically clear rollover_info on each restart
2018-04-03 13:18:52 -04:00
reactor.py
reactor: Add ability to register callbacks
2018-06-30 14:13:47 -04:00
serialhdl.py
serialqueue: Limit message transmission to available receive buffer size
2018-05-28 11:12:30 -04:00
stepper.py
endstop_phase: Move endstop phase homing code to new "extras" module
2018-10-16 13:09:23 -04:00
toolhead.py
idle_timeout: Add printing/ready/idle tracking
2018-10-28 18:39:45 -04:00
util.py
util: Fix versioning when gitdir is absent ( #809 )
2018-10-27 10:44:38 -04:00