421 lines
15 KiB
C
421 lines
15 KiB
C
/**
|
|
******************************************************************************
|
|
* @file stm32f1xx_hal_dac_ex.c
|
|
* @author MCD Application Team
|
|
* @brief DAC HAL module driver.
|
|
* This file provides firmware functions to manage the extended
|
|
* functionalities of the DAC peripheral.
|
|
*
|
|
*
|
|
@verbatim
|
|
==============================================================================
|
|
##### How to use this driver #####
|
|
==============================================================================
|
|
[..]
|
|
*** Dual mode IO operation ***
|
|
==============================
|
|
(+) When Dual mode is enabled (i.e. DAC Channel1 and Channel2 are used simultaneously) :
|
|
Use HAL_DACEx_DualGetValue() to get digital data to be converted and use
|
|
HAL_DACEx_DualSetValue() to set digital value to converted simultaneously in
|
|
Channel 1 and Channel 2.
|
|
|
|
*** Signal generation operation ***
|
|
===================================
|
|
(+) Use HAL_DACEx_TriangleWaveGenerate() to generate Triangle signal.
|
|
(+) Use HAL_DACEx_NoiseWaveGenerate() to generate Noise signal.
|
|
|
|
@endverbatim
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
|
* All rights reserved.</center></h2>
|
|
*
|
|
* This software component is licensed by ST under BSD 3-Clause license,
|
|
* the "License"; You may not use this file except in compliance with the
|
|
* License. You may obtain a copy of the License at:
|
|
* opensource.org/licenses/BSD-3-Clause
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32f1xx_hal.h"
|
|
|
|
/** @addtogroup STM32F1xx_HAL_Driver
|
|
* @{
|
|
*/
|
|
|
|
#ifdef HAL_DAC_MODULE_ENABLED
|
|
|
|
#if defined(DAC)
|
|
|
|
/** @defgroup DACEx DACEx
|
|
* @brief DAC Extended HAL module driver
|
|
* @{
|
|
*/
|
|
|
|
/* Private typedef -----------------------------------------------------------*/
|
|
/* Private define ------------------------------------------------------------*/
|
|
/* Private macro -------------------------------------------------------------*/
|
|
/* Private variables ---------------------------------------------------------*/
|
|
/* Private function prototypes -----------------------------------------------*/
|
|
/* Exported functions --------------------------------------------------------*/
|
|
|
|
/** @defgroup DACEx_Exported_Functions DACEx Exported Functions
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup DACEx_Exported_Functions_Group2 IO operation functions
|
|
* @brief Extended IO operation functions
|
|
*
|
|
@verbatim
|
|
==============================================================================
|
|
##### Extended features functions #####
|
|
==============================================================================
|
|
[..] This section provides functions allowing to:
|
|
(+) Start conversion.
|
|
(+) Stop conversion.
|
|
(+) Start conversion and enable DMA transfer.
|
|
(+) Stop conversion and disable DMA transfer.
|
|
(+) Get result of conversion.
|
|
(+) Get result of dual mode conversion.
|
|
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Enable or disable the selected DAC channel wave generation.
|
|
* @param hdac pointer to a DAC_HandleTypeDef structure that contains
|
|
* the configuration information for the specified DAC.
|
|
* @param Channel The selected DAC channel.
|
|
* This parameter can be one of the following values:
|
|
* @arg DAC_CHANNEL_1: DAC Channel1 selected
|
|
* @arg DAC_CHANNEL_2: DAC Channel2 selected
|
|
* @param Amplitude Select max triangle amplitude.
|
|
* This parameter can be one of the following values:
|
|
* @arg DAC_TRIANGLEAMPLITUDE_1: Select max triangle amplitude of 1
|
|
* @arg DAC_TRIANGLEAMPLITUDE_3: Select max triangle amplitude of 3
|
|
* @arg DAC_TRIANGLEAMPLITUDE_7: Select max triangle amplitude of 7
|
|
* @arg DAC_TRIANGLEAMPLITUDE_15: Select max triangle amplitude of 15
|
|
* @arg DAC_TRIANGLEAMPLITUDE_31: Select max triangle amplitude of 31
|
|
* @arg DAC_TRIANGLEAMPLITUDE_63: Select max triangle amplitude of 63
|
|
* @arg DAC_TRIANGLEAMPLITUDE_127: Select max triangle amplitude of 127
|
|
* @arg DAC_TRIANGLEAMPLITUDE_255: Select max triangle amplitude of 255
|
|
* @arg DAC_TRIANGLEAMPLITUDE_511: Select max triangle amplitude of 511
|
|
* @arg DAC_TRIANGLEAMPLITUDE_1023: Select max triangle amplitude of 1023
|
|
* @arg DAC_TRIANGLEAMPLITUDE_2047: Select max triangle amplitude of 2047
|
|
* @arg DAC_TRIANGLEAMPLITUDE_4095: Select max triangle amplitude of 4095
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_DACEx_TriangleWaveGenerate(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t Amplitude)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_DAC_CHANNEL(Channel));
|
|
assert_param(IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(Amplitude));
|
|
|
|
/* Process locked */
|
|
__HAL_LOCK(hdac);
|
|
|
|
/* Change DAC state */
|
|
hdac->State = HAL_DAC_STATE_BUSY;
|
|
|
|
/* Enable the triangle wave generation for the selected DAC channel */
|
|
MODIFY_REG(hdac->Instance->CR, ((DAC_CR_WAVE1) | (DAC_CR_MAMP1)) << (Channel & 0x10UL), (DAC_CR_WAVE1_1 | Amplitude) << (Channel & 0x10UL));
|
|
|
|
/* Change DAC state */
|
|
hdac->State = HAL_DAC_STATE_READY;
|
|
|
|
/* Process unlocked */
|
|
__HAL_UNLOCK(hdac);
|
|
|
|
/* Return function status */
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Enable or disable the selected DAC channel wave generation.
|
|
* @param hdac pointer to a DAC_HandleTypeDef structure that contains
|
|
* the configuration information for the specified DAC.
|
|
* @param Channel The selected DAC channel.
|
|
* This parameter can be one of the following values:
|
|
* @arg DAC_CHANNEL_1: DAC Channel1 selected
|
|
* @arg DAC_CHANNEL_2: DAC Channel2 selected
|
|
* @param Amplitude Unmask DAC channel LFSR for noise wave generation.
|
|
* This parameter can be one of the following values:
|
|
* @arg DAC_LFSRUNMASK_BIT0: Unmask DAC channel LFSR bit0 for noise wave generation
|
|
* @arg DAC_LFSRUNMASK_BITS1_0: Unmask DAC channel LFSR bit[1:0] for noise wave generation
|
|
* @arg DAC_LFSRUNMASK_BITS2_0: Unmask DAC channel LFSR bit[2:0] for noise wave generation
|
|
* @arg DAC_LFSRUNMASK_BITS3_0: Unmask DAC channel LFSR bit[3:0] for noise wave generation
|
|
* @arg DAC_LFSRUNMASK_BITS4_0: Unmask DAC channel LFSR bit[4:0] for noise wave generation
|
|
* @arg DAC_LFSRUNMASK_BITS5_0: Unmask DAC channel LFSR bit[5:0] for noise wave generation
|
|
* @arg DAC_LFSRUNMASK_BITS6_0: Unmask DAC channel LFSR bit[6:0] for noise wave generation
|
|
* @arg DAC_LFSRUNMASK_BITS7_0: Unmask DAC channel LFSR bit[7:0] for noise wave generation
|
|
* @arg DAC_LFSRUNMASK_BITS8_0: Unmask DAC channel LFSR bit[8:0] for noise wave generation
|
|
* @arg DAC_LFSRUNMASK_BITS9_0: Unmask DAC channel LFSR bit[9:0] for noise wave generation
|
|
* @arg DAC_LFSRUNMASK_BITS10_0: Unmask DAC channel LFSR bit[10:0] for noise wave generation
|
|
* @arg DAC_LFSRUNMASK_BITS11_0: Unmask DAC channel LFSR bit[11:0] for noise wave generation
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_DACEx_NoiseWaveGenerate(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t Amplitude)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_DAC_CHANNEL(Channel));
|
|
assert_param(IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(Amplitude));
|
|
|
|
/* Process locked */
|
|
__HAL_LOCK(hdac);
|
|
|
|
/* Change DAC state */
|
|
hdac->State = HAL_DAC_STATE_BUSY;
|
|
|
|
/* Enable the noise wave generation for the selected DAC channel */
|
|
MODIFY_REG(hdac->Instance->CR, ((DAC_CR_WAVE1) | (DAC_CR_MAMP1)) << (Channel & 0x10UL), (DAC_CR_WAVE1_0 | Amplitude) << (Channel & 0x10UL));
|
|
|
|
/* Change DAC state */
|
|
hdac->State = HAL_DAC_STATE_READY;
|
|
|
|
/* Process unlocked */
|
|
__HAL_UNLOCK(hdac);
|
|
|
|
/* Return function status */
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Set the specified data holding register value for dual DAC channel.
|
|
* @param hdac pointer to a DAC_HandleTypeDef structure that contains
|
|
* the configuration information for the specified DAC.
|
|
* @param Alignment Specifies the data alignment for dual channel DAC.
|
|
* This parameter can be one of the following values:
|
|
* DAC_ALIGN_8B_R: 8bit right data alignment selected
|
|
* DAC_ALIGN_12B_L: 12bit left data alignment selected
|
|
* DAC_ALIGN_12B_R: 12bit right data alignment selected
|
|
* @param Data1 Data for DAC Channel1 to be loaded in the selected data holding register.
|
|
* @param Data2 Data for DAC Channel2 to be loaded in the selected data holding register.
|
|
* @note In dual mode, a unique register access is required to write in both
|
|
* DAC channels at the same time.
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_DACEx_DualSetValue(DAC_HandleTypeDef *hdac, uint32_t Alignment, uint32_t Data1, uint32_t Data2)
|
|
{
|
|
uint32_t data;
|
|
uint32_t tmp;
|
|
|
|
/* Check the parameters */
|
|
assert_param(IS_DAC_ALIGN(Alignment));
|
|
assert_param(IS_DAC_DATA(Data1));
|
|
assert_param(IS_DAC_DATA(Data2));
|
|
|
|
/* Calculate and set dual DAC data holding register value */
|
|
if (Alignment == DAC_ALIGN_8B_R)
|
|
{
|
|
data = ((uint32_t)Data2 << 8U) | Data1;
|
|
}
|
|
else
|
|
{
|
|
data = ((uint32_t)Data2 << 16U) | Data1;
|
|
}
|
|
|
|
tmp = (uint32_t)hdac->Instance;
|
|
tmp += DAC_DHR12RD_ALIGNMENT(Alignment);
|
|
|
|
/* Set the dual DAC selected data holding register */
|
|
*(__IO uint32_t *)tmp = data;
|
|
|
|
/* Return function status */
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Conversion complete callback in non-blocking mode for Channel2.
|
|
* @param hdac pointer to a DAC_HandleTypeDef structure that contains
|
|
* the configuration information for the specified DAC.
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_DACEx_ConvCpltCallbackCh2(DAC_HandleTypeDef *hdac)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hdac);
|
|
|
|
/* NOTE : This function should not be modified, when the callback is needed,
|
|
the HAL_DACEx_ConvCpltCallbackCh2 could be implemented in the user file
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* @brief Conversion half DMA transfer callback in non-blocking mode for Channel2.
|
|
* @param hdac pointer to a DAC_HandleTypeDef structure that contains
|
|
* the configuration information for the specified DAC.
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_DACEx_ConvHalfCpltCallbackCh2(DAC_HandleTypeDef *hdac)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hdac);
|
|
|
|
/* NOTE : This function should not be modified, when the callback is needed,
|
|
the HAL_DACEx_ConvHalfCpltCallbackCh2 could be implemented in the user file
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* @brief Error DAC callback for Channel2.
|
|
* @param hdac pointer to a DAC_HandleTypeDef structure that contains
|
|
* the configuration information for the specified DAC.
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_DACEx_ErrorCallbackCh2(DAC_HandleTypeDef *hdac)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hdac);
|
|
|
|
/* NOTE : This function should not be modified, when the callback is needed,
|
|
the HAL_DACEx_ErrorCallbackCh2 could be implemented in the user file
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* @brief DMA underrun DAC callback for Channel2.
|
|
* @param hdac pointer to a DAC_HandleTypeDef structure that contains
|
|
* the configuration information for the specified DAC.
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_DACEx_DMAUnderrunCallbackCh2(DAC_HandleTypeDef *hdac)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hdac);
|
|
|
|
/* NOTE : This function should not be modified, when the callback is needed,
|
|
the HAL_DACEx_DMAUnderrunCallbackCh2 could be implemented in the user file
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup DACEx_Exported_Functions_Group3 Peripheral Control functions
|
|
* @brief Extended Peripheral Control functions
|
|
*
|
|
@verbatim
|
|
==============================================================================
|
|
##### Peripheral Control functions #####
|
|
==============================================================================
|
|
[..] This section provides functions allowing to:
|
|
(+) Set the specified data holding register value for DAC channel.
|
|
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Return the last data output value of the selected DAC channel.
|
|
* @param hdac pointer to a DAC_HandleTypeDef structure that contains
|
|
* the configuration information for the specified DAC.
|
|
* @retval The selected DAC channel data output value.
|
|
*/
|
|
uint32_t HAL_DACEx_DualGetValue(DAC_HandleTypeDef *hdac)
|
|
{
|
|
uint32_t tmp = 0U;
|
|
|
|
tmp |= hdac->Instance->DOR1;
|
|
|
|
tmp |= hdac->Instance->DOR2 << 16U;
|
|
|
|
/* Returns the DAC channel data output register value */
|
|
return tmp;
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Private functions ---------------------------------------------------------*/
|
|
/** @defgroup DACEx_Private_Functions DACEx private functions
|
|
* @brief Extended private functions
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief DMA conversion complete callback.
|
|
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
|
|
* the configuration information for the specified DMA module.
|
|
* @retval None
|
|
*/
|
|
void DAC_DMAConvCpltCh2(DMA_HandleTypeDef *hdma)
|
|
{
|
|
DAC_HandleTypeDef *hdac = (DAC_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
|
|
|
|
#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1)
|
|
hdac->ConvCpltCallbackCh2(hdac);
|
|
#else
|
|
HAL_DACEx_ConvCpltCallbackCh2(hdac);
|
|
#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */
|
|
|
|
hdac->State = HAL_DAC_STATE_READY;
|
|
}
|
|
|
|
/**
|
|
* @brief DMA half transfer complete callback.
|
|
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
|
|
* the configuration information for the specified DMA module.
|
|
* @retval None
|
|
*/
|
|
void DAC_DMAHalfConvCpltCh2(DMA_HandleTypeDef *hdma)
|
|
{
|
|
DAC_HandleTypeDef *hdac = (DAC_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
|
|
/* Conversion complete callback */
|
|
#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1)
|
|
hdac->ConvHalfCpltCallbackCh2(hdac);
|
|
#else
|
|
HAL_DACEx_ConvHalfCpltCallbackCh2(hdac);
|
|
#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */
|
|
}
|
|
|
|
/**
|
|
* @brief DMA error callback.
|
|
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
|
|
* the configuration information for the specified DMA module.
|
|
* @retval None
|
|
*/
|
|
void DAC_DMAErrorCh2(DMA_HandleTypeDef *hdma)
|
|
{
|
|
DAC_HandleTypeDef *hdac = (DAC_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
|
|
|
|
/* Set DAC error code to DMA error */
|
|
hdac->ErrorCode |= HAL_DAC_ERROR_DMA;
|
|
|
|
#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1)
|
|
hdac->ErrorCallbackCh2(hdac);
|
|
#else
|
|
HAL_DACEx_ErrorCallbackCh2(hdac);
|
|
#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */
|
|
|
|
hdac->State = HAL_DAC_STATE_READY;
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#endif /* DAC */
|
|
|
|
#endif /* HAL_DAC_MODULE_ENABLED */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|