182 lines
14 KiB
C
182 lines
14 KiB
C
/**
|
|
* \file
|
|
*
|
|
* \brief Instance description for SERCOM3
|
|
*
|
|
* Copyright (c) 2018 Microchip Technology Inc.
|
|
*
|
|
* \asf_license_start
|
|
*
|
|
* \page License
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*
|
|
* Licensed under the Apache License, Version 2.0 (the "License"); you may
|
|
* not use this file except in compliance with the License.
|
|
* You may obtain a copy of the Licence at
|
|
*
|
|
* http://www.apache.org/licenses/LICENSE-2.0
|
|
*
|
|
* Unless required by applicable law or agreed to in writing, software
|
|
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
|
|
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
* See the License for the specific language governing permissions and
|
|
* limitations under the License.
|
|
*
|
|
* \asf_license_stop
|
|
*
|
|
*/
|
|
|
|
#ifndef _SAMD51_SERCOM3_INSTANCE_
|
|
#define _SAMD51_SERCOM3_INSTANCE_
|
|
|
|
/* ========== Register definition for SERCOM3 peripheral ========== */
|
|
#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
|
|
#define REG_SERCOM3_I2CM_CTRLA (0x41014000) /**< \brief (SERCOM3) I2CM Control A */
|
|
#define REG_SERCOM3_I2CM_CTRLB (0x41014004) /**< \brief (SERCOM3) I2CM Control B */
|
|
#define REG_SERCOM3_I2CM_CTRLC (0x41014008) /**< \brief (SERCOM3) I2CM Control C */
|
|
#define REG_SERCOM3_I2CM_BAUD (0x4101400C) /**< \brief (SERCOM3) I2CM Baud Rate */
|
|
#define REG_SERCOM3_I2CM_INTENCLR (0x41014014) /**< \brief (SERCOM3) I2CM Interrupt Enable Clear */
|
|
#define REG_SERCOM3_I2CM_INTENSET (0x41014016) /**< \brief (SERCOM3) I2CM Interrupt Enable Set */
|
|
#define REG_SERCOM3_I2CM_INTFLAG (0x41014018) /**< \brief (SERCOM3) I2CM Interrupt Flag Status and Clear */
|
|
#define REG_SERCOM3_I2CM_STATUS (0x4101401A) /**< \brief (SERCOM3) I2CM Status */
|
|
#define REG_SERCOM3_I2CM_SYNCBUSY (0x4101401C) /**< \brief (SERCOM3) I2CM Synchronization Busy */
|
|
#define REG_SERCOM3_I2CM_ADDR (0x41014024) /**< \brief (SERCOM3) I2CM Address */
|
|
#define REG_SERCOM3_I2CM_DATA (0x41014028) /**< \brief (SERCOM3) I2CM Data */
|
|
#define REG_SERCOM3_I2CM_DBGCTRL (0x41014030) /**< \brief (SERCOM3) I2CM Debug Control */
|
|
#define REG_SERCOM3_I2CS_CTRLA (0x41014000) /**< \brief (SERCOM3) I2CS Control A */
|
|
#define REG_SERCOM3_I2CS_CTRLB (0x41014004) /**< \brief (SERCOM3) I2CS Control B */
|
|
#define REG_SERCOM3_I2CS_CTRLC (0x41014008) /**< \brief (SERCOM3) I2CS Control C */
|
|
#define REG_SERCOM3_I2CS_INTENCLR (0x41014014) /**< \brief (SERCOM3) I2CS Interrupt Enable Clear */
|
|
#define REG_SERCOM3_I2CS_INTENSET (0x41014016) /**< \brief (SERCOM3) I2CS Interrupt Enable Set */
|
|
#define REG_SERCOM3_I2CS_INTFLAG (0x41014018) /**< \brief (SERCOM3) I2CS Interrupt Flag Status and Clear */
|
|
#define REG_SERCOM3_I2CS_STATUS (0x4101401A) /**< \brief (SERCOM3) I2CS Status */
|
|
#define REG_SERCOM3_I2CS_SYNCBUSY (0x4101401C) /**< \brief (SERCOM3) I2CS Synchronization Busy */
|
|
#define REG_SERCOM3_I2CS_LENGTH (0x41014022) /**< \brief (SERCOM3) I2CS Length */
|
|
#define REG_SERCOM3_I2CS_ADDR (0x41014024) /**< \brief (SERCOM3) I2CS Address */
|
|
#define REG_SERCOM3_I2CS_DATA (0x41014028) /**< \brief (SERCOM3) I2CS Data */
|
|
#define REG_SERCOM3_SPI_CTRLA (0x41014000) /**< \brief (SERCOM3) SPI Control A */
|
|
#define REG_SERCOM3_SPI_CTRLB (0x41014004) /**< \brief (SERCOM3) SPI Control B */
|
|
#define REG_SERCOM3_SPI_CTRLC (0x41014008) /**< \brief (SERCOM3) SPI Control C */
|
|
#define REG_SERCOM3_SPI_BAUD (0x4101400C) /**< \brief (SERCOM3) SPI Baud Rate */
|
|
#define REG_SERCOM3_SPI_INTENCLR (0x41014014) /**< \brief (SERCOM3) SPI Interrupt Enable Clear */
|
|
#define REG_SERCOM3_SPI_INTENSET (0x41014016) /**< \brief (SERCOM3) SPI Interrupt Enable Set */
|
|
#define REG_SERCOM3_SPI_INTFLAG (0x41014018) /**< \brief (SERCOM3) SPI Interrupt Flag Status and Clear */
|
|
#define REG_SERCOM3_SPI_STATUS (0x4101401A) /**< \brief (SERCOM3) SPI Status */
|
|
#define REG_SERCOM3_SPI_SYNCBUSY (0x4101401C) /**< \brief (SERCOM3) SPI Synchronization Busy */
|
|
#define REG_SERCOM3_SPI_LENGTH (0x41014022) /**< \brief (SERCOM3) SPI Length */
|
|
#define REG_SERCOM3_SPI_ADDR (0x41014024) /**< \brief (SERCOM3) SPI Address */
|
|
#define REG_SERCOM3_SPI_DATA (0x41014028) /**< \brief (SERCOM3) SPI Data */
|
|
#define REG_SERCOM3_SPI_DBGCTRL (0x41014030) /**< \brief (SERCOM3) SPI Debug Control */
|
|
#define REG_SERCOM3_USART_CTRLA (0x41014000) /**< \brief (SERCOM3) USART Control A */
|
|
#define REG_SERCOM3_USART_CTRLB (0x41014004) /**< \brief (SERCOM3) USART Control B */
|
|
#define REG_SERCOM3_USART_CTRLC (0x41014008) /**< \brief (SERCOM3) USART Control C */
|
|
#define REG_SERCOM3_USART_BAUD (0x4101400C) /**< \brief (SERCOM3) USART Baud Rate */
|
|
#define REG_SERCOM3_USART_RXPL (0x4101400E) /**< \brief (SERCOM3) USART Receive Pulse Length */
|
|
#define REG_SERCOM3_USART_INTENCLR (0x41014014) /**< \brief (SERCOM3) USART Interrupt Enable Clear */
|
|
#define REG_SERCOM3_USART_INTENSET (0x41014016) /**< \brief (SERCOM3) USART Interrupt Enable Set */
|
|
#define REG_SERCOM3_USART_INTFLAG (0x41014018) /**< \brief (SERCOM3) USART Interrupt Flag Status and Clear */
|
|
#define REG_SERCOM3_USART_STATUS (0x4101401A) /**< \brief (SERCOM3) USART Status */
|
|
#define REG_SERCOM3_USART_SYNCBUSY (0x4101401C) /**< \brief (SERCOM3) USART Synchronization Busy */
|
|
#define REG_SERCOM3_USART_RXERRCNT (0x41014020) /**< \brief (SERCOM3) USART Receive Error Count */
|
|
#define REG_SERCOM3_USART_LENGTH (0x41014022) /**< \brief (SERCOM3) USART Length */
|
|
#define REG_SERCOM3_USART_DATA (0x41014028) /**< \brief (SERCOM3) USART Data */
|
|
#define REG_SERCOM3_USART_DBGCTRL (0x41014030) /**< \brief (SERCOM3) USART Debug Control */
|
|
#else
|
|
#define REG_SERCOM3_I2CM_CTRLA (*(RwReg *)0x41014000UL) /**< \brief (SERCOM3) I2CM Control A */
|
|
#define REG_SERCOM3_I2CM_CTRLB (*(RwReg *)0x41014004UL) /**< \brief (SERCOM3) I2CM Control B */
|
|
#define REG_SERCOM3_I2CM_CTRLC (*(RwReg *)0x41014008UL) /**< \brief (SERCOM3) I2CM Control C */
|
|
#define REG_SERCOM3_I2CM_BAUD (*(RwReg *)0x4101400CUL) /**< \brief (SERCOM3) I2CM Baud Rate */
|
|
#define REG_SERCOM3_I2CM_INTENCLR (*(RwReg8 *)0x41014014UL) /**< \brief (SERCOM3) I2CM Interrupt Enable Clear */
|
|
#define REG_SERCOM3_I2CM_INTENSET (*(RwReg8 *)0x41014016UL) /**< \brief (SERCOM3) I2CM Interrupt Enable Set */
|
|
#define REG_SERCOM3_I2CM_INTFLAG (*(RwReg8 *)0x41014018UL) /**< \brief (SERCOM3) I2CM Interrupt Flag Status and Clear */
|
|
#define REG_SERCOM3_I2CM_STATUS (*(RwReg16*)0x4101401AUL) /**< \brief (SERCOM3) I2CM Status */
|
|
#define REG_SERCOM3_I2CM_SYNCBUSY (*(RoReg *)0x4101401CUL) /**< \brief (SERCOM3) I2CM Synchronization Busy */
|
|
#define REG_SERCOM3_I2CM_ADDR (*(RwReg *)0x41014024UL) /**< \brief (SERCOM3) I2CM Address */
|
|
#define REG_SERCOM3_I2CM_DATA (*(RwReg *)0x41014028UL) /**< \brief (SERCOM3) I2CM Data */
|
|
#define REG_SERCOM3_I2CM_DBGCTRL (*(RwReg8 *)0x41014030UL) /**< \brief (SERCOM3) I2CM Debug Control */
|
|
#define REG_SERCOM3_I2CS_CTRLA (*(RwReg *)0x41014000UL) /**< \brief (SERCOM3) I2CS Control A */
|
|
#define REG_SERCOM3_I2CS_CTRLB (*(RwReg *)0x41014004UL) /**< \brief (SERCOM3) I2CS Control B */
|
|
#define REG_SERCOM3_I2CS_CTRLC (*(RwReg *)0x41014008UL) /**< \brief (SERCOM3) I2CS Control C */
|
|
#define REG_SERCOM3_I2CS_INTENCLR (*(RwReg8 *)0x41014014UL) /**< \brief (SERCOM3) I2CS Interrupt Enable Clear */
|
|
#define REG_SERCOM3_I2CS_INTENSET (*(RwReg8 *)0x41014016UL) /**< \brief (SERCOM3) I2CS Interrupt Enable Set */
|
|
#define REG_SERCOM3_I2CS_INTFLAG (*(RwReg8 *)0x41014018UL) /**< \brief (SERCOM3) I2CS Interrupt Flag Status and Clear */
|
|
#define REG_SERCOM3_I2CS_STATUS (*(RwReg16*)0x4101401AUL) /**< \brief (SERCOM3) I2CS Status */
|
|
#define REG_SERCOM3_I2CS_SYNCBUSY (*(RoReg *)0x4101401CUL) /**< \brief (SERCOM3) I2CS Synchronization Busy */
|
|
#define REG_SERCOM3_I2CS_LENGTH (*(RwReg16*)0x41014022UL) /**< \brief (SERCOM3) I2CS Length */
|
|
#define REG_SERCOM3_I2CS_ADDR (*(RwReg *)0x41014024UL) /**< \brief (SERCOM3) I2CS Address */
|
|
#define REG_SERCOM3_I2CS_DATA (*(RwReg *)0x41014028UL) /**< \brief (SERCOM3) I2CS Data */
|
|
#define REG_SERCOM3_SPI_CTRLA (*(RwReg *)0x41014000UL) /**< \brief (SERCOM3) SPI Control A */
|
|
#define REG_SERCOM3_SPI_CTRLB (*(RwReg *)0x41014004UL) /**< \brief (SERCOM3) SPI Control B */
|
|
#define REG_SERCOM3_SPI_CTRLC (*(RwReg *)0x41014008UL) /**< \brief (SERCOM3) SPI Control C */
|
|
#define REG_SERCOM3_SPI_BAUD (*(RwReg8 *)0x4101400CUL) /**< \brief (SERCOM3) SPI Baud Rate */
|
|
#define REG_SERCOM3_SPI_INTENCLR (*(RwReg8 *)0x41014014UL) /**< \brief (SERCOM3) SPI Interrupt Enable Clear */
|
|
#define REG_SERCOM3_SPI_INTENSET (*(RwReg8 *)0x41014016UL) /**< \brief (SERCOM3) SPI Interrupt Enable Set */
|
|
#define REG_SERCOM3_SPI_INTFLAG (*(RwReg8 *)0x41014018UL) /**< \brief (SERCOM3) SPI Interrupt Flag Status and Clear */
|
|
#define REG_SERCOM3_SPI_STATUS (*(RwReg16*)0x4101401AUL) /**< \brief (SERCOM3) SPI Status */
|
|
#define REG_SERCOM3_SPI_SYNCBUSY (*(RoReg *)0x4101401CUL) /**< \brief (SERCOM3) SPI Synchronization Busy */
|
|
#define REG_SERCOM3_SPI_LENGTH (*(RwReg16*)0x41014022UL) /**< \brief (SERCOM3) SPI Length */
|
|
#define REG_SERCOM3_SPI_ADDR (*(RwReg *)0x41014024UL) /**< \brief (SERCOM3) SPI Address */
|
|
#define REG_SERCOM3_SPI_DATA (*(RwReg *)0x41014028UL) /**< \brief (SERCOM3) SPI Data */
|
|
#define REG_SERCOM3_SPI_DBGCTRL (*(RwReg8 *)0x41014030UL) /**< \brief (SERCOM3) SPI Debug Control */
|
|
#define REG_SERCOM3_USART_CTRLA (*(RwReg *)0x41014000UL) /**< \brief (SERCOM3) USART Control A */
|
|
#define REG_SERCOM3_USART_CTRLB (*(RwReg *)0x41014004UL) /**< \brief (SERCOM3) USART Control B */
|
|
#define REG_SERCOM3_USART_CTRLC (*(RwReg *)0x41014008UL) /**< \brief (SERCOM3) USART Control C */
|
|
#define REG_SERCOM3_USART_BAUD (*(RwReg16*)0x4101400CUL) /**< \brief (SERCOM3) USART Baud Rate */
|
|
#define REG_SERCOM3_USART_RXPL (*(RwReg8 *)0x4101400EUL) /**< \brief (SERCOM3) USART Receive Pulse Length */
|
|
#define REG_SERCOM3_USART_INTENCLR (*(RwReg8 *)0x41014014UL) /**< \brief (SERCOM3) USART Interrupt Enable Clear */
|
|
#define REG_SERCOM3_USART_INTENSET (*(RwReg8 *)0x41014016UL) /**< \brief (SERCOM3) USART Interrupt Enable Set */
|
|
#define REG_SERCOM3_USART_INTFLAG (*(RwReg8 *)0x41014018UL) /**< \brief (SERCOM3) USART Interrupt Flag Status and Clear */
|
|
#define REG_SERCOM3_USART_STATUS (*(RwReg16*)0x4101401AUL) /**< \brief (SERCOM3) USART Status */
|
|
#define REG_SERCOM3_USART_SYNCBUSY (*(RoReg *)0x4101401CUL) /**< \brief (SERCOM3) USART Synchronization Busy */
|
|
#define REG_SERCOM3_USART_RXERRCNT (*(RoReg8 *)0x41014020UL) /**< \brief (SERCOM3) USART Receive Error Count */
|
|
#define REG_SERCOM3_USART_LENGTH (*(RwReg16*)0x41014022UL) /**< \brief (SERCOM3) USART Length */
|
|
#define REG_SERCOM3_USART_DATA (*(RwReg *)0x41014028UL) /**< \brief (SERCOM3) USART Data */
|
|
#define REG_SERCOM3_USART_DBGCTRL (*(RwReg8 *)0x41014030UL) /**< \brief (SERCOM3) USART Debug Control */
|
|
#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
|
|
|
|
/* ========== Instance parameters for SERCOM3 peripheral ========== */
|
|
#define SERCOM3_CLK_REDUCTION 1 // Reduce clock options to pin 1 for SPI and USART
|
|
#define SERCOM3_DLY_COMPENSATION 1 // Compensates for a fast DLY50 element. Assuming 20ns
|
|
#define SERCOM3_DMA 1 // DMA support implemented?
|
|
#define SERCOM3_DMAC_ID_RX 10 // Index of DMA RX trigger
|
|
#define SERCOM3_DMAC_ID_TX 11 // Index of DMA TX trigger
|
|
#define SERCOM3_FIFO_DEPTH_POWER 1 // 2^FIFO_DEPTH_POWER gives rx FIFO depth.
|
|
#define SERCOM3_GCLK_ID_CORE 24
|
|
#define SERCOM3_GCLK_ID_SLOW 3
|
|
#define SERCOM3_INT_MSB 6
|
|
#define SERCOM3_PMSB 3
|
|
#define SERCOM3_RETENTION_SUPPORT 0 // Retention supported?
|
|
#define SERCOM3_SE_CNT 1 // SE counter included?
|
|
#define SERCOM3_SPI 1 // SPI mode implemented?
|
|
#define SERCOM3_SPI_HW_SS_CTRL 1 // Master _SS hardware control implemented?
|
|
#define SERCOM3_SPI_ICSPACE_EXT 1 // SPI inter character space implemented?
|
|
#define SERCOM3_SPI_OZMO 0 // OZMO features implemented?
|
|
#define SERCOM3_SPI_WAKE_ON_SSL 1 // _SS low detect implemented?
|
|
#define SERCOM3_TTBIT_EXTENSION 1 // 32-bit extension implemented?
|
|
#define SERCOM3_TWIM 1 // TWI Master mode implemented?
|
|
#define SERCOM3_TWIS 1 // TWI Slave mode implemented?
|
|
#define SERCOM3_TWIS_AUTO_ACK 1 // TWI slave automatic acknowledge implemented?
|
|
#define SERCOM3_TWIS_GROUP_CMD 1 // TWI slave group command implemented?
|
|
#define SERCOM3_TWIS_SDASETUP_CNT_SIZE 8 // TWIS sda setup count size
|
|
#define SERCOM3_TWIS_SDASETUP_SIZE 4 // TWIS sda setup size
|
|
#define SERCOM3_TWIS_SUDAT 1 // TWI slave SDA setup implemented?
|
|
#define SERCOM3_TWI_FASTMP 1 // TWI fast mode plus implemented?
|
|
#define SERCOM3_TWI_HSMODE 1 // USART mode implemented?
|
|
#define SERCOM3_TWI_SCLSM_MODE 1 // TWI SCL clock stretch mode implemented?
|
|
#define SERCOM3_TWI_SMB_TIMEOUTS 1 // TWI SMBus timeouts implemented?
|
|
#define SERCOM3_TWI_TENBIT_ADR 1 // TWI ten bit enabled?
|
|
#define SERCOM3_USART 1 // USART mode implemented?
|
|
#define SERCOM3_USART_AUTOBAUD 1 // USART autobaud implemented?
|
|
#define SERCOM3_USART_COLDET 1 // USART collision detection implemented?
|
|
#define SERCOM3_USART_FLOW_CTRL 1 // USART flow control implemented?
|
|
#define SERCOM3_USART_FRAC_BAUD 1 // USART fractional BAUD implemented?
|
|
#define SERCOM3_USART_IRDA 1 // USART IrDA implemented?
|
|
#define SERCOM3_USART_ISO7816 1 // USART ISO7816 mode implemented?
|
|
#define SERCOM3_USART_LIN_MASTER 1 // USART LIN Master mode implemented?
|
|
#define SERCOM3_USART_RS485 1 // USART RS485 mode implemented?
|
|
#define SERCOM3_USART_SAMPA_EXT 1 // USART sample adjust implemented?
|
|
#define SERCOM3_USART_SAMPR_EXT 1 // USART oversampling adjustment implemented?
|
|
|
|
#endif /* _SAMD51_SERCOM3_INSTANCE_ */
|