196 lines
8.6 KiB
Python
196 lines
8.6 KiB
Python
# Support for filament width sensor
|
|
#
|
|
# Copyright (C) 2019 Mustafa YILDIZ <mydiz@hotmail.com>
|
|
#
|
|
# This file may be distributed under the terms of the GNU GPLv3 license.
|
|
import filament_switch_sensor
|
|
|
|
ADC_REPORT_TIME = 0.500
|
|
ADC_SAMPLE_TIME = 0.03
|
|
ADC_SAMPLE_COUNT = 15
|
|
|
|
class HallFilamentWidthSensor:
|
|
def __init__(self, config):
|
|
self.printer = config.get_printer()
|
|
self.reactor = self.printer.get_reactor()
|
|
self.pin1 = config.get('adc1')
|
|
self.pin2 = config.get('adc2')
|
|
self.dia1=config.getfloat('Cal_dia1', 1.5)
|
|
self.dia2=config.getfloat('Cal_dia2', 2.0)
|
|
self.rawdia1=config.getint('Raw_dia1', 9500)
|
|
self.rawdia2=config.getint('Raw_dia2', 10500)
|
|
self.MEASUREMENT_INTERVAL_MM=config.getint('measurement_interval',10)
|
|
self.nominal_filament_dia = config.getfloat(
|
|
'default_nominal_filament_diameter', above=1)
|
|
self.measurement_delay = config.getfloat('measurement_delay', above=0.)
|
|
self.measurement_max_difference = config.getfloat('max_difference', 0.2)
|
|
self.max_diameter = (self.nominal_filament_dia
|
|
+ self.measurement_max_difference)
|
|
self.min_diameter = (self.nominal_filament_dia
|
|
- self.measurement_max_difference)
|
|
self.diameter =self.nominal_filament_dia
|
|
self.is_active =config.getboolean('enable', False)
|
|
self.runout_dia=config.getfloat('min_diameter', 1.0)
|
|
# Use the current diameter instead of nominal while the first
|
|
# measurement isn't in place
|
|
self.use_current_dia_while_delay = config.getboolean(
|
|
'use_current_dia_while_delay', False)
|
|
# filament array [position, filamentWidth]
|
|
self.filament_array = []
|
|
self.lastFilamentWidthReading = 0
|
|
# printer objects
|
|
self.toolhead = self.ppins = self.mcu_adc = None
|
|
self.printer.register_event_handler("klippy:ready", self.handle_ready)
|
|
# Start adc
|
|
self.ppins = self.printer.lookup_object('pins')
|
|
self.mcu_adc = self.ppins.setup_pin('adc', self.pin1)
|
|
self.mcu_adc.setup_minmax(ADC_SAMPLE_TIME, ADC_SAMPLE_COUNT)
|
|
self.mcu_adc.setup_adc_callback(ADC_REPORT_TIME, self.adc_callback)
|
|
self.mcu_adc2 = self.ppins.setup_pin('adc', self.pin2)
|
|
self.mcu_adc2.setup_minmax(ADC_SAMPLE_TIME, ADC_SAMPLE_COUNT)
|
|
self.mcu_adc2.setup_adc_callback(ADC_REPORT_TIME, self.adc2_callback)
|
|
# extrude factor updating
|
|
self.extrude_factor_update_timer = self.reactor.register_timer(
|
|
self.extrude_factor_update_event)
|
|
# Register commands
|
|
self.gcode = self.printer.lookup_object('gcode')
|
|
self.gcode.register_command('QUERY_FILAMENT_WIDTH', self.cmd_M407)
|
|
self.gcode.register_command('RESET_FILAMENT_WIDTH_SENSOR',
|
|
self.cmd_ClearFilamentArray)
|
|
self.gcode.register_command('DISABLE_FILAMENT_WIDTH_SENSOR',
|
|
self.cmd_M406)
|
|
self.gcode.register_command('ENABLE_FILAMENT_WIDTH_SENSOR',
|
|
self.cmd_M405)
|
|
self.gcode.register_command('QUERY_RAW_FILAMENT_WIDTH',
|
|
self.cmd_Get_Raw_Values)
|
|
self.runout_helper = filament_switch_sensor.RunoutHelper(config)
|
|
# Initialization
|
|
def handle_ready(self):
|
|
# Load printer objects
|
|
self.toolhead = self.printer.lookup_object('toolhead')
|
|
|
|
# Start extrude factor update timer
|
|
self.reactor.update_timer(self.extrude_factor_update_timer,
|
|
self.reactor.NOW)
|
|
|
|
def adc_callback(self, read_time, read_value):
|
|
# read sensor value
|
|
self.lastFilamentWidthReading = round(read_value * 10000)
|
|
|
|
def adc2_callback(self, read_time, read_value):
|
|
# read sensor value
|
|
self.lastFilamentWidthReading2 = round(read_value * 10000)
|
|
# calculate diameter
|
|
diameter_new = round((self.dia2 - self.dia1)/
|
|
(self.rawdia2-self.rawdia1)*
|
|
((self.lastFilamentWidthReading+self.lastFilamentWidthReading2)
|
|
-self.rawdia1)+self.dia1,2)
|
|
self.diameter=(5.0 * self.diameter + diameter_new)/6
|
|
|
|
def update_filament_array(self, last_epos):
|
|
# Fill array
|
|
if len(self.filament_array) > 0:
|
|
# Get last reading position in array & calculate next
|
|
# reading position
|
|
next_reading_position = (self.filament_array[-1][0] +
|
|
self.MEASUREMENT_INTERVAL_MM)
|
|
if next_reading_position <= (last_epos + self.measurement_delay):
|
|
self.filament_array.append([last_epos + self.measurement_delay,
|
|
self.diameter])
|
|
else:
|
|
# add first item to array
|
|
self.filament_array.append([self.measurement_delay + last_epos,
|
|
self.diameter])
|
|
|
|
def extrude_factor_update_event(self, eventtime):
|
|
# Update extrude factor
|
|
pos = self.toolhead.get_position()
|
|
last_epos = pos[3]
|
|
# Update filament array for lastFilamentWidthReading
|
|
self.update_filament_array(last_epos)
|
|
# Check runout
|
|
self.runout_helper.note_filament_present(
|
|
self.diameter > self.runout_dia)
|
|
# Does filament exists
|
|
if self.lastFilamentWidthReading > 0.5:
|
|
if len(self.filament_array) > 0:
|
|
# Get first position in filament array
|
|
pending_position = self.filament_array[0][0]
|
|
if pending_position <= last_epos:
|
|
# Get first item in filament_array queue
|
|
item = self.filament_array.pop(0)
|
|
filament_width = item[1]
|
|
elif self.use_current_dia_while_delay:
|
|
filament_width = self.diameter
|
|
else:
|
|
filament_width = self.nominal_filament_dia
|
|
if ((filament_width <= self.max_diameter)
|
|
and (filament_width >= self.min_diameter)):
|
|
percentage = round(self.nominal_filament_dia**2
|
|
/ filament_width**2 * 100)
|
|
self.gcode.run_script("M221 S" + str(percentage))
|
|
else:
|
|
self.gcode.run_script("M221 S100")
|
|
else:
|
|
self.gcode.run_script("M221 S100")
|
|
self.filament_array = []
|
|
return eventtime + 1
|
|
|
|
def cmd_M407(self, gcmd):
|
|
response = ""
|
|
if self.lastFilamentWidthReading > 0:
|
|
response += ("Filament dia (measured mm): "
|
|
+ str(self.diameter))
|
|
else:
|
|
response += "Filament NOT present"
|
|
gcmd.respond_info(response)
|
|
|
|
def cmd_ClearFilamentArray(self, gcmd):
|
|
self.filament_array = []
|
|
gcmd.respond_info("Filament width measurements cleared!")
|
|
# Set extrude multiplier to 100%
|
|
self.gcode.run_script_from_command("M221 S100")
|
|
|
|
def cmd_M405(self, gcmd):
|
|
response = "Filament width sensor Turned On"
|
|
if self.is_active:
|
|
response = "Filament width sensor is already On"
|
|
else:
|
|
self.is_active = True
|
|
# Start extrude factor update timer
|
|
self.reactor.update_timer(self.extrude_factor_update_timer,
|
|
self.reactor.NOW)
|
|
gcmd.respond_info(response)
|
|
|
|
def cmd_M406(self, gcmd):
|
|
response = "Filament width sensor Turned Off"
|
|
if not self.is_active:
|
|
response = "Filament width sensor is already Off"
|
|
else:
|
|
self.is_active = False
|
|
# Stop extrude factor update timer
|
|
self.reactor.update_timer(self.extrude_factor_update_timer,
|
|
self.reactor.NEVER)
|
|
# Clear filament array
|
|
self.filament_array = []
|
|
# Set extrude multiplier to 100%
|
|
self.gcode.run_script_from_command("M221 S100")
|
|
gcmd.respond_info(response)
|
|
|
|
def cmd_Get_Raw_Values(self, gcmd):
|
|
response = "ADC1="
|
|
response += (" "+str(self.lastFilamentWidthReading))
|
|
response += (" ADC2="+str(self.lastFilamentWidthReading2))
|
|
response += (" RAW="+
|
|
str(self.lastFilamentWidthReading
|
|
+self.lastFilamentWidthReading2))
|
|
gcmd.respond_info(response)
|
|
def get_status(self, eventtime):
|
|
return {'Diameter': self.diameter,
|
|
'Raw':(self.lastFilamentWidthReading+
|
|
self.lastFilamentWidthReading2),
|
|
'is_active':self.is_active}
|
|
|
|
def load_config(config):
|
|
return HallFilamentWidthSensor(config)
|