Клиппер
Go to file
Jason S. McMullan 7605244fa0 safe_z_home: Fix issue where 'home_xy_position: 0,0' did not position at 0,0
If '[stepper_x]' and/or '[stepper_y]' have a 'position_min' that is
non-zero, and '[safe_z_home] home_xy_position' is '0,0'; then the 'G28'
command will _not_ move to '0,0'; but stay at 'position_min' during the
Z endstop test.

This fix corrects this issue.

Signed-off-by: Jason S. McMullan <jason.mcmullan@gmail.com>
2019-10-03 18:05:21 -04:00
config fan: Add off_below option for fans (#1897) 2019-10-03 17:59:03 -04:00
docs docs: Update Sensorless_Homing.md with new TMCs (#1958) 2019-10-03 17:56:40 -04:00
klippy safe_z_home: Fix issue where 'home_xy_position: 0,0' did not position at 0,0 2019-10-03 18:05:21 -04:00
lib lib: No need to make lpc176x SystemInit() externally visible 2019-09-06 13:49:16 -04:00
scripts buildcommands: Match DECL_X names to the actual C macro names 2019-08-22 13:26:30 -04:00
src avr: List 20Mhz option below 16Mhz option in Kconfig 2019-09-30 10:05:02 -04:00
test test: Add initial test case for gcode_arcs support 2019-09-13 12:05:15 -04:00
.gitignore util: Fix versioning when gitdir is absent (#809) 2018-10-27 10:44:38 -04:00
.travis.yml test: Update .travis.yml to list apt packages one per line 2018-08-17 09:47:57 -04:00
COPYING Initial commit of source code. 2016-05-25 11:37:40 -04:00
Makefile Makefile: Use "tr -s" in compile_time_request.txt generation 2019-08-22 11:40:02 -04:00
README.md docs: Update main README file to point to website 2019-04-20 13:43:35 -04:00

README.md

Welcome to the Klipper project!

Klipper

https://www.klipper3d.org/

Klipper is a 3d-Printer firmware. It combines the power of a general purpose computer with one or more micro-controllers. See the features document for more information on why you should use Klipper.

To begin using Klipper start by installing it.

Klipper is Free Software. See the license or read the documentation.