klipper

Клиппер

Go to file

TheBugLebowsky 75275bad7c config: New configuration printer-hiprecy-leo-2019.cfg (#4021 ) A working configuration example for Hiprecy Leo printer (https://www.hiprecy.com/product/402/) with no Touchscreen funcionalities because separated LCD firmware needed. TMC2130 SPI drivers. The Self-levelling plate sensor is PINDA probe type Direct Drive is a BMG "3:1" gear ratio Signed-off-by: Morgan Barresi <morganfw@gmail.com>		2021-03-07 18:53:46 -05:00
.github/workflows	workflows: Update stale-issue-bot.yaml to also close invalid tickets	2021-02-02 13:22:35 -05:00
config	config: New configuration printer-hiprecy-leo-2019.cfg (#4021 )	2021-03-07 18:53:46 -05:00
docs	console: Make baud an optional parameter	2021-03-02 11:38:50 -05:00
klippy	idle_timeout: change standard timeout g-code (#4018 )	2021-03-07 13:48:54 -05:00
lib	lib: add FatFS notes to README	2021-02-05 19:37:56 -05:00
scripts	serialhdl: Update callers to decide serial fd type	2021-03-02 11:38:50 -05:00
src	stm32: Add support for STM32F1 I2C1 alternate pin mapping (#4012 )	2021-03-02 23:02:20 -05:00
test	test: Add printer-flsun-q5-2020.cfg to printers.test and minor changes	2021-02-22 15:29:34 -05:00
.gitignore	util: Fix versioning when gitdir is absent (#809 )	2018-10-27 10:44:38 -04:00
COPYING	Initial commit of source code.	2016-05-25 11:37:40 -04:00
Makefile	Makefile: Improve build when changing micro-controller architecture	2020-12-17 10:02:16 -05:00
README.md	docs: Update main README file to point to website	2019-04-20 13:43:35 -04:00

README.md

Welcome to the Klipper project!

https://www.klipper3d.org/

Klipper is a 3d-Printer firmware. It combines the power of a general purpose computer with one or more micro-controllers. See the features document for more information on why you should use Klipper.

To begin using Klipper start by installing it.

Klipper is Free Software. See the license or read the documentation.