Клиппер
Go to file
Kevin O'Connor 739583a21b test: Add printer-lulzbot-taz6-dual-v3-2017.cfg to printers.test
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-10-30 12:46:03 -04:00
config config: Lulzbot TAZ6 w/ Dual v3 Toolhead Config (#2111) 2019-10-30 12:37:22 -04:00
docs docs: Recommend OctoPrint v1.3.12 in Installation.md 2019-10-30 11:02:03 -04:00
klippy tmc_uart: Don't try to configure analog pins to -1 value 2019-10-26 11:33:30 -04:00
lib lib: Add a copy of stm32f0 cmsis files from v1.10.0 2019-10-23 21:16:35 -04:00
scripts flash_usb: Pass -t $CONFIG_MCU to flash_usb on all targets 2019-10-26 18:48:00 -04:00
src flash_usb: Pass -t $CONFIG_MCU to flash_usb on all targets 2019-10-26 18:48:00 -04:00
test test: Add printer-lulzbot-taz6-dual-v3-2017.cfg to printers.test 2019-10-30 12:46:03 -04:00
.gitignore util: Fix versioning when gitdir is absent (#809) 2018-10-27 10:44:38 -04:00
.travis.yml test: Update .travis.yml to list apt packages one per line 2018-08-17 09:47:57 -04:00
COPYING Initial commit of source code. 2016-05-25 11:37:40 -04:00
Makefile Makefile: Use "tr -s" in compile_time_request.txt generation 2019-08-22 11:40:02 -04:00
README.md docs: Update main README file to point to website 2019-04-20 13:43:35 -04:00

README.md

Welcome to the Klipper project!

Klipper

https://www.klipper3d.org/

Klipper is a 3d-Printer firmware. It combines the power of a general purpose computer with one or more micro-controllers. See the features document for more information on why you should use Klipper.

To begin using Klipper start by installing it.

Klipper is Free Software. See the license or read the documentation.