233 lines
10 KiB
Python
233 lines
10 KiB
Python
# Code to configure miscellaneous chips
|
|
#
|
|
# Copyright (C) 2017,2018 Kevin O'Connor <kevin@koconnor.net>
|
|
#
|
|
# This file may be distributed under the terms of the GNU GPLv3 license.
|
|
import logging
|
|
import pins, mcu
|
|
|
|
REPLICAPE_MAX_CURRENT = 3.84
|
|
REPLICAPE_SHIFT_REGISTER_BUS = 0x0101
|
|
REPLICAPE_PCA9685_BUS = 2
|
|
REPLICAPE_PCA9685_ADDRESS = 0x70
|
|
REPLICAPE_PCA9685_CYCLE_TIME = .001
|
|
PIN_MIN_TIME = 0.100
|
|
|
|
class pca9685_pwm:
|
|
def __init__(self, replicape, channel, pin_params):
|
|
self._replicape = replicape
|
|
self._channel = channel
|
|
if pin_params['type'] not in ['digital_out', 'pwm']:
|
|
raise pins.error("Pin type not supported on replicape")
|
|
self._mcu = replicape.host_mcu
|
|
self._mcu.add_config_object(self)
|
|
self._bus = REPLICAPE_PCA9685_BUS
|
|
self._address = REPLICAPE_PCA9685_ADDRESS
|
|
self._cycle_time = REPLICAPE_PCA9685_CYCLE_TIME
|
|
self._max_duration = 2.
|
|
self._oid = None
|
|
self._invert = pin_params['invert']
|
|
self._start_value = self._shutdown_value = float(self._invert)
|
|
self._is_static = False
|
|
self._last_clock = 0
|
|
self._pwm_max = 0.
|
|
self._set_cmd = None
|
|
def get_mcu(self):
|
|
return self._mcu
|
|
def setup_max_duration(self, max_duration):
|
|
self._max_duration = max_duration
|
|
def setup_cycle_time(self, cycle_time, hardware_pwm=False):
|
|
if hardware_pwm:
|
|
raise pins.error("pca9685 does not support hardware_pwm parameter")
|
|
if cycle_time != self._cycle_time:
|
|
logging.info("Ignoring pca9685 cycle time of %.6f (using %.6f)",
|
|
cycle_time, self._cycle_time)
|
|
def setup_start_value(self, start_value, shutdown_value, is_static=False):
|
|
if is_static and start_value != shutdown_value:
|
|
raise pins.error("Static pin can not have shutdown value")
|
|
if self._invert:
|
|
start_value = 1. - start_value
|
|
shutdown_value = 1. - shutdown_value
|
|
self._start_value = max(0., min(1., start_value))
|
|
self._shutdown_value = max(0., min(1., shutdown_value))
|
|
self._is_static = is_static
|
|
self._replicape.note_pwm_start_value(
|
|
self._channel, self._start_value, self._shutdown_value)
|
|
def build_config(self):
|
|
self._pwm_max = self._mcu.get_constant_float("PCA9685_MAX")
|
|
cycle_ticks = self._mcu.seconds_to_clock(self._cycle_time)
|
|
if self._is_static:
|
|
self._mcu.add_config_cmd(
|
|
"set_pca9685_out bus=%d addr=%d channel=%d"
|
|
" cycle_ticks=%d value=%d" % (
|
|
self._bus, self._address, self._channel,
|
|
cycle_ticks, self._start_value * self._pwm_max))
|
|
return
|
|
self._oid = self._mcu.create_oid()
|
|
self._mcu.add_config_cmd(
|
|
"config_pca9685 oid=%d bus=%d addr=%d channel=%d cycle_ticks=%d"
|
|
" value=%d default_value=%d max_duration=%d" % (
|
|
self._oid, self._bus, self._address, self._channel, cycle_ticks,
|
|
self._start_value * self._pwm_max,
|
|
self._shutdown_value * self._pwm_max,
|
|
self._mcu.seconds_to_clock(self._max_duration)))
|
|
cmd_queue = self._mcu.alloc_command_queue()
|
|
self._set_cmd = self._mcu.lookup_command(
|
|
"schedule_pca9685_out oid=%c clock=%u value=%hu", cq=cmd_queue)
|
|
def set_pwm(self, print_time, value):
|
|
clock = self._mcu.print_time_to_clock(print_time)
|
|
if self._invert:
|
|
value = 1. - value
|
|
value = int(max(0., min(1., value)) * self._pwm_max + 0.5)
|
|
self._replicape.note_pwm_enable(print_time, self._channel, value)
|
|
self._set_cmd.send([self._oid, clock, value],
|
|
minclock=self._last_clock, reqclock=clock)
|
|
self._last_clock = clock
|
|
def set_digital(self, print_time, value):
|
|
if value:
|
|
self.set_pwm(print_time, 1.)
|
|
else:
|
|
self.set_pwm(print_time, 0.)
|
|
|
|
class ReplicapeDACEnable:
|
|
def __init__(self, replicape, channel, pin_params):
|
|
if pin_params['type'] != 'digital_out':
|
|
raise pins.error("Replicape virtual enable pin must be digital_out")
|
|
if pin_params['invert']:
|
|
raise pins.error("Replicape virtual enable pin can not be inverted")
|
|
self.mcu = replicape.host_mcu
|
|
self.value = replicape.stepper_dacs[channel]
|
|
self.pwm = pca9685_pwm(replicape, channel, pin_params)
|
|
def get_mcu(self):
|
|
return self.mcu
|
|
def setup_max_duration(self, max_duration):
|
|
self.pwm.setup_max_duration(max_duration)
|
|
def set_digital(self, print_time, value):
|
|
if value:
|
|
self.pwm.set_pwm(print_time, self.value)
|
|
else:
|
|
self.pwm.set_pwm(print_time, 0.)
|
|
|
|
ReplicapeStepConfig = {
|
|
'disable': None,
|
|
'1': (1<<7)|(1<<5), '2': (1<<7)|(1<<5)|(1<<6), 'spread2': (1<<5),
|
|
'4': (1<<7)|(1<<5)|(1<<4), '16': (1<<7)|(1<<5)|(1<<6)|(1<<4),
|
|
'spread4': (1<<5)|(1<<4), 'spread16': (1<<7), 'stealth4': (1<<7)|(1<<6),
|
|
'stealth16': 0
|
|
}
|
|
|
|
class Replicape:
|
|
def __init__(self, config):
|
|
printer = config.get_printer()
|
|
ppins = printer.lookup_object('pins')
|
|
ppins.register_chip('replicape', self)
|
|
revisions = {'B3': 'B3'}
|
|
config.getchoice('revision', revisions)
|
|
self.host_mcu = mcu.get_printer_mcu(printer, config.get('host_mcu'))
|
|
# Setup enable pin
|
|
enable_pin = config.get('enable_pin', '!P9_41')
|
|
self.mcu_pwm_enable = ppins.setup_pin('digital_out', enable_pin)
|
|
self.mcu_pwm_enable.setup_max_duration(0.)
|
|
self.mcu_pwm_start_value = self.mcu_pwm_shutdown_value = False
|
|
# Setup power pins
|
|
self.pins = {
|
|
"power_e": (pca9685_pwm, 5), "power_h": (pca9685_pwm, 3),
|
|
"power_hotbed": (pca9685_pwm, 4),
|
|
"power_fan0": (pca9685_pwm, 7), "power_fan1": (pca9685_pwm, 8),
|
|
"power_fan2": (pca9685_pwm, 9), "power_fan3": (pca9685_pwm, 10) }
|
|
# Setup stepper config
|
|
self.spi_send_cmd = None
|
|
self.last_stepper_time = 0.
|
|
self.stepper_dacs = {}
|
|
shift_registers = [1, 0, 0, 1, 1]
|
|
for port, name in enumerate('xyzeh'):
|
|
prefix = 'stepper_%s_' % (name,)
|
|
sc = config.getchoice(
|
|
prefix + 'microstep_mode', ReplicapeStepConfig, 'disable')
|
|
if sc is None:
|
|
continue
|
|
sc |= shift_registers[port]
|
|
if config.getboolean(prefix + 'chopper_off_time_high', False):
|
|
sc |= 1<<3
|
|
if config.getboolean(prefix + 'chopper_hysteresis_high', False):
|
|
sc |= 1<<2
|
|
if config.getboolean(prefix + 'chopper_blank_time_high', True):
|
|
sc |= 1<<1
|
|
shift_registers[port] = sc
|
|
channel = port + 11
|
|
cur = config.getfloat(
|
|
prefix + 'current', above=0., maxval=REPLICAPE_MAX_CURRENT)
|
|
self.stepper_dacs[channel] = cur / REPLICAPE_MAX_CURRENT
|
|
self.pins[prefix + 'enable'] = (ReplicapeDACEnable, channel)
|
|
self.enabled_channels = {ch: False for cl, ch in self.pins.values()}
|
|
if config.getboolean('servo0_enable', False):
|
|
shift_registers[1] |= 1
|
|
if config.getboolean('servo1_enable', False):
|
|
shift_registers[2] |= 1
|
|
self.sr_disabled = tuple(reversed(shift_registers))
|
|
if [i for i in [0, 1, 2] if 11+i in self.stepper_dacs]:
|
|
# Enable xyz steppers
|
|
shift_registers[0] &= ~1
|
|
if [i for i in [3, 4] if 11+i in self.stepper_dacs]:
|
|
# Enable eh steppers
|
|
shift_registers[3] &= ~1
|
|
if (config.getboolean('standstill_power_down', False)
|
|
and self.stepper_dacs):
|
|
shift_registers[4] &= ~1
|
|
self.sr_enabled = tuple(reversed(shift_registers))
|
|
self.host_mcu.add_config_object(self)
|
|
self.sr_oid = self.host_mcu.create_oid()
|
|
str_sr_disabled = "".join(["%02x" % (x,) for x in self.sr_disabled])
|
|
self.host_mcu.add_config_cmd(
|
|
"config_spi_without_cs oid=%d bus=%d mode=0 rate=50000000"
|
|
" shutdown_msg=%s" % (
|
|
self.sr_oid, REPLICAPE_SHIFT_REGISTER_BUS, str_sr_disabled))
|
|
self.host_mcu.add_config_cmd("spi_send oid=%d data=%s" % (
|
|
self.sr_oid, str_sr_disabled), is_init=True)
|
|
def build_config(self):
|
|
cmd_queue = self.host_mcu.alloc_command_queue()
|
|
self.spi_send_cmd = self.host_mcu.lookup_command(
|
|
"spi_send oid=%c data=%*s", cq=cmd_queue)
|
|
def note_pwm_start_value(self, channel, start_value, shutdown_value):
|
|
self.mcu_pwm_start_value |= not not start_value
|
|
self.mcu_pwm_shutdown_value |= not not shutdown_value
|
|
self.mcu_pwm_enable.setup_start_value(
|
|
self.mcu_pwm_start_value, self.mcu_pwm_shutdown_value)
|
|
self.enabled_channels[channel] = not not start_value
|
|
def note_pwm_enable(self, print_time, channel, value):
|
|
is_enable = not not value
|
|
if self.enabled_channels[channel] == is_enable:
|
|
# Nothing to do
|
|
return
|
|
self.enabled_channels[channel] = is_enable
|
|
# Check if need to set the pca9685 enable pin
|
|
on_channels = [1 for c, e in self.enabled_channels.items() if e]
|
|
if not on_channels:
|
|
self.mcu_pwm_enable.set_digital(print_time, 0)
|
|
elif is_enable and len(on_channels) == 1:
|
|
self.mcu_pwm_enable.set_digital(print_time, 1)
|
|
# Check if need to set the stepper enable lines
|
|
if channel not in self.stepper_dacs:
|
|
return
|
|
on_dacs = [1 for c in self.stepper_dacs.keys()
|
|
if self.enabled_channels[c]]
|
|
if not on_dacs:
|
|
sr = self.sr_disabled
|
|
elif is_enable and len(on_dacs) == 1:
|
|
sr = self.sr_enabled
|
|
else:
|
|
return
|
|
print_time = max(print_time, self.last_stepper_time + PIN_MIN_TIME)
|
|
clock = self.host_mcu.print_time_to_clock(print_time)
|
|
# XXX - the spi_send message should be scheduled
|
|
self.spi_send_cmd.send([self.sr_oid, sr], minclock=clock, reqclock=clock)
|
|
def setup_pin(self, pin_params):
|
|
pin = pin_params['pin']
|
|
if pin not in self.pins:
|
|
raise pins.error("Unknown replicape pin %s" % (pin,))
|
|
pclass, channel = self.pins[pin]
|
|
return pclass(self, channel, pin_params)
|
|
|
|
def load_config(config):
|
|
return Replicape(config)
|