klipper

Клиппер

Go to file

Kevin O'Connor 6f5f2a3bc7 tmc_uart: Make sure to set analog mux pins after a restart Don't assume the analog mux pins are in a low state at startup. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>		2019-10-24 22:00:58 -04:00
config	config: The duet2 maestro uses a 2200 ohm pullup resistor	2019-10-24 13:07:07 -04:00
docs	docs: Update benchmarks for stm32f0	2019-10-23 21:45:07 -04:00
klippy	tmc_uart: Make sure to set analog mux pins after a restart	2019-10-24 22:00:58 -04:00
lib	lib: Add a copy of stm32f0 cmsis files from v1.10.0	2019-10-23 21:16:35 -04:00
scripts	scripts: Use current username in install-ubuntu-18.04.sh	2019-10-23 14:54:31 -04:00
src	stm32: Implement armcm_main() in arch specific code	2019-10-24 11:35:18 -04:00
test	stm32f0: Rename internal build symbol from MACH_STM32F0 to MACH_STM32F0_HAL	2019-10-23 21:16:35 -04:00
.gitignore	util: Fix versioning when gitdir is absent (#809 )	2018-10-27 10:44:38 -04:00
.travis.yml	test: Update .travis.yml to list apt packages one per line	2018-08-17 09:47:57 -04:00
COPYING	Initial commit of source code.	2016-05-25 11:37:40 -04:00
Makefile	Makefile: Use "tr -s" in compile_time_request.txt generation	2019-08-22 11:40:02 -04:00
README.md	docs: Update main README file to point to website	2019-04-20 13:43:35 -04:00

README.md

Welcome to the Klipper project!

https://www.klipper3d.org/

Klipper is a 3d-Printer firmware. It combines the power of a general purpose computer with one or more micro-controllers. See the features document for more information on why you should use Klipper.

To begin using Klipper start by installing it.

Klipper is Free Software. See the license or read the documentation.