klipper

History

Kevin O'Connor 606222da5b docs: Add STM32F103 benchmarks to the Features document Signed-off-by: Kevin O'Connor <kevin@koconnor.net>		2018-04-20 11:19:37 -04:00
..
img	docs: Try to make the klippy.log bug reporting more clear	2018-01-21 13:08:31 -05:00
prints	docs: Minor update to square.scad	2018-01-02 21:56:29 -05:00
CONTRIBUTING.md	…
Code_Overview.md	docs: Add a section on adding new host modules to Code_Overview.md	2018-03-28 13:12:41 -04:00
Config_checks.md	docs: Recommend running PID_CALIBRATE in Config_checks.md	2018-03-18 12:43:41 -04:00
Contact.md	docs: Try to make the klippy.log bug reporting more clear	2018-01-21 13:08:31 -05:00
Debugging.md	docs: Update Debugging.md with information on logextract	2018-01-11 13:48:40 -05:00
FAQ.md	docs: Add additional information to FAQ on heater checks	2018-04-09 22:00:26 -04:00
Features.md	docs: Add STM32F103 benchmarks to the Features document	2018-04-20 11:19:37 -04:00
G-Codes.md	extruder: Add SET_PRESSURE_ADVANCE command.	2018-04-03 00:00:41 -04:00
Installation.md	docs: Update installation document for OctoPrint 1.3.7	2018-04-09 11:39:36 -04:00
Kinematics.md	…
MCU_Commands.md	…
Overview.md	docs: Add a G-Codes.md file with the list of available commands	2018-03-08 14:11:20 -05:00
Pressure_Advance.md	docs: Note pressure_advance over 0.20 is unlikely to improve quality	2018-01-08 11:07:26 -05:00
Protocol.md	…
README.md	…
Releases.md	docs: Update release notes for v0.6.0 release	2018-03-31 14:04:39 -04:00
Todo.md	verify_heater: Add initial support for verifying heaters and sensors	2018-03-11 00:49:11 -05:00
beaglebone.md	docs: Note the use of the virtual_sdcard feature	2018-03-02 11:28:01 -05:00
developer-certificate-of-origin	…
issue_template.md	docs: Add github issue template	2018-01-31 14:30:05 -05:00

README.md

Welcome to the Klipper documentation. The overview document is a good starting point.