klipper

History

Kevin O'Connor db97f36631 gpiocmds: Allow the start value for a pin to differ from the default_value Allow the start value to be different from the default/shutdown value for the pin. This will be useful for "heater fans" that should startup in the off state, and transition to full on in a shutdown state. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>		2017-10-12 11:59:27 -04:00
..
img	docs: Kinematics document image updates	2017-04-27 12:00:09 -04:00
prints	docs: Add a notch to the default square.stl test object	2017-10-03 22:08:36 -04:00
Code_Overview.md	docs: Add a section on time handling to Code_Overview.md	2017-09-27 15:11:15 -04:00
Contact.md	docs: Add mailing list to Contact.md	2017-10-10 14:24:04 -04:00
Debugging.md	avr: Add SIMULAVR build option; don't show WATCHDOG or SERIAL_BAUD_U2X	2017-05-28 11:04:59 -04:00
Features.md	docs: Reword performance paragraph in Features.md	2017-09-27 13:59:47 -04:00
Installation.md	docs: Point to beaglebone.md from the main installation document	2017-10-11 21:03:13 -04:00
Kinematics.md	toolhead: Permit look-ahead between Z moves	2017-09-03 15:46:48 -04:00
MCU_Commands.md	gpiocmds: Allow the start value for a pin to differ from the default_value	2017-10-12 11:59:27 -04:00
Overview.md	docs: Add Contact.md file with developer contact information	2017-10-10 12:43:44 -04:00
Pressure_Advance.md	docs: Note how to handle odd corner in Pressure_Advance.md	2017-05-25 13:39:16 -04:00
Protocol.md	docs: Use only single space at start of new sentence	2017-05-01 11:58:32 -04:00
README.md	docs: Improve documentation for those starting in docs/	2017-04-27 16:05:26 -04:00
Releases.md	docs: Note version 0.4.0 release	2017-05-03 14:32:36 -04:00
Todo.md	docs: Remove items from Todo.md	2017-10-01 19:34:00 -04:00
beaglebone.md	docs: Point to beaglebone.md from the main installation document	2017-10-11 21:03:13 -04:00

README.md

Welcome to the Klipper documentation. The overview document is a good starting point.