Kevin O'Connor e0f275cddf serialhdl: Don't open port at 1200 baud ... The 1200 baud trick on the Arduino Due does both a reset and an erase. The erase is not desired. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>		2017-10-12 21:46:09 -04:00
..
avrsim.cfg	heater: Rename thermistor_type config name to sensor_type	2017-03-13 00:46:33 -04:00
example-corexy.cfg	stepper: Use a sane default for homing_positive_dir	2017-07-24 14:31:46 -04:00
example-delta.cfg	stepper: Use a sane default for homing_positive_dir	2017-07-24 14:31:46 -04:00
example-extras.cfg	fan: Enable heater_fan objects on an MCU shutdown event	2017-10-12 11:59:27 -04:00
example.cfg	serialhdl: Don't open port at 1200 baud	2017-10-12 21:46:09 -04:00
generic-cramps.cfg	stepper: Use a sane default for homing_positive_dir	2017-07-24 14:31:46 -04:00
generic-melzi.cfg	config: Add generic-melzi.cfg file for Melzi boards	2017-10-12 12:43:13 -04:00
generic-rambo.cfg	chipmisc: Add support for configuring ad5206 digipots	2017-08-26 18:27:21 -04:00
generic-ramps.cfg	stepper: Use a sane default for homing_positive_dir	2017-07-24 14:31:46 -04:00
generic-replicape.cfg	chipmisc: Add support for Replicape board	2017-09-20 13:18:07 -04:00
makergear-m2-2012.cfg	chipmisc: Add support for configuring ad5206 digipots	2017-08-26 18:27:21 -04:00