3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
klipper/docs
History
Florian Heilmann 64e6d85898 sam4e8e: Add the SAM4e8e port 
This can be flashed to e.g. the duet wifi using bossac. It requires a
later version as is currently included in the klipper repo (1.8
vs. 1.2). Comms are currently via UART0 only, USB serial is still TBD

Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
 		2018-08-08 10:44:49 -04:00
..
img docs: Update documentation with iterative solver changes 2018-06-20 09:26:10 -04:00
prints docs: Minor update to square.scad 2018-01-02 21:56:29 -05:00
CONTRIBUTING.md docs: Add a CONTRIBUTING document 2017-12-24 12:33:01 -05:00
Code_Overview.md docs: Add a section with micro-controller porting tips to Code_Overview.md 2018-07-11 14:40:39 -04:00
Config_checks.md docs: Recommend running PID_CALIBRATE in Config_checks.md 2018-03-18 12:43:41 -04:00
Contact.md docs: Expand on why it is important to provide the log in Contact.md 2018-07-08 20:30:35 -04:00
Debugging.md docs: Update Debugging.md with information on logextract 2018-01-11 13:48:40 -05:00
FAQ.md force_move: Provide defaults for SET_KINEMATIC_POSITION parameters 2018-08-02 08:58:18 -04:00
Features.md sam4e8e: Add the SAM4e8e port 2018-08-08 10:44:49 -04:00
G-Codes.md force_move: Provide defaults for SET_KINEMATIC_POSITION parameters 2018-08-02 08:58:18 -04:00
Installation.md docs: Update main documentation to not Smoothieboard support 2018-07-08 11:01:54 -04:00
Kinematics.md docs: Minor change to wording of junction speeds 2018-08-03 15:48:07 -04:00
MCU_Commands.md basecmd: Rename get_status to get_clock 2018-05-29 10:57:29 -04:00
Overview.md docs: Remove the Todo.md file 2018-07-26 12:51:01 -04:00
Pressure_Advance.md docs: Note pressure_advance over 0.20 is unlikely to improve quality 2018-01-08 11:07:26 -05:00
Protocol.md docs: Use only single space at start of new sentence 2017-05-01 11:58:32 -04:00
README.md docs: Improve documentation for those starting in docs/ 2017-04-27 16:05:26 -04:00
Releases.md docs: Update release notes for v0.6.0 release 2018-03-31 14:04:39 -04:00
beaglebone.md pru: Disable ADC reading directly from the PRU 2018-06-27 12:10:25 -04:00
developer-certificate-of-origin docs: Add a CONTRIBUTING document 2017-12-24 12:33:01 -05:00
issue_template.md docs: Add github issue template 2018-01-31 14:30:05 -05:00
stm32f1.md stm32f1: add SPI support 2018-07-07 11:05:33 -04:00

README.md

Welcome to the Klipper documentation. The overview document is a good starting point.